|
|
04-12-2009, 08:13 AM | #1 |
-
11817
Rep 23,187
Posts |
mod week
this week a bunch of parts ive been waiting on should be arriving. Ive been up since 4 today thinking about my car. M3's definitley make us go a little crazy. Tomorrow my rear tails are getting smoked(removing the film from my first attempt) and the secondary cats deleted at the same time. My macht snell spacers should be here end of the week from rennspec. camaro is shipping my 20,000k hids monday or tuesday. And bimmian is still screwing around trying to get me the film for the headlights. Then in less than a month i have my first track day planned at pacific raceways. yeah. My plan for today is to try and polish up the stock exhaust a little and see how that turns out. Hoping it will look similar to the eisenmann after polishing my IND. If it turns out hopefully after the first time here the repolish to keep it that way will be a little quicker. Will post photos of my stock can.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
04-12-2009, 10:32 AM | #2 |
-
11817
Rep 23,187
Posts |
well i ended up with a pretty nice finshed product i think for only a couple hours of time. I first cleaned the entire stock can with simple green. I then went over the entire body of the can twice with plain old heavy duty rubbing compound. Next i went over it again twice with mothers wheel polish. Then one time with aurora 3000 hand glaze. Then a coat of ps21 wax for the finally. Chose these products because it was what was available in my garage at 6am on a sunday. All this was done by hand so saved me a trip to the gym today. i didnt have the lift available today either so done on jack stands which made it extra difficult. I wasnt able to remove everything but the dark stains that look like rust are gone as well as most of the scratches. im happy. It isnt a super mirror finish but not far off either.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
04-12-2009, 12:00 PM | #3 |
Brigadier General
126
Rep 4,144
Posts |
Not too many people polish their muffler. But with the M3s muffler being so noticeable this may become a must if you don't do an aftermarket exhaust. Looks pretty good. Cheers.
__________________
2017 F80 YMB.
|
Appreciate
0
|
04-12-2009, 02:05 PM | #4 |
-
11817
Rep 23,187
Posts |
yeah thanks just trying to make it look a little nicer and enhancing the sound with a secondary cat delete instead of a 2500 cat back pipe and 3000 for axle back.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
04-12-2009, 08:43 PM | #5 |
E90 - the Ultimate family hauler
22
Rep 578
Posts |
You got the exhaust that clean and shiny by using Simple Green?
Any tips on the method you used?
__________________
2008 AW E90 M3 - current
2002 TIAG E46 M3 - gone 1991 DiamondSchwartz E30 M3 - gone but not forgotten |
Appreciate
0
|
04-13-2009, 01:10 AM | #8 |
Major
444
Rep 1,061
Posts |
Looks pretty nice
__________________
2015 F82 YMB M4 (Feb 28th ED, re-deliveried on Apr 18th) |My 2015 YMB M4 ED Journal 2008 E92 SSII M3 Coupe (Sold) | My long gone 2008 E92 SSII M3 2002 E39 SG 530i (Gone) |
Appreciate
0
|
04-13-2009, 09:25 AM | #9 |
-
11817
Rep 23,187
Posts |
i explained the whole process i went through in the second message in this post. Just used what i had available and spent a couple hours with it. Was really easy and cleaned up nice. Only some scratches that i couldnt get out but wasnt expecting perfection just a nicer look from the rear.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
04-13-2009, 06:16 PM | #10 |
-
11817
Rep 23,187
Posts |
here is a quick pic of my smoked tailights turned out as dark as my others which isnt what i was going for. I was specific about being lighter than before and even looked at a couple samples to pick the darkness. Oh well too late now i guess. They look good still just a little too dark i think. I will take other photos once its not crappy out. to top it off the exhaust shop refused to do my secondary cat delete today as well. Not a good start to my mod week.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
04-14-2009, 12:29 AM | #12 |
-
11817
Rep 23,187
Posts |
oh i thought that exhaust shop had something against BMW?
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
04-14-2009, 09:14 AM | #13 |
Colonel
278
Rep 2,008
Posts |
Is is ALWAYS raining in the North-West?
__________________
(Waitlist): #1 M2CSL
(Current): 2016 F15 X5 3.5xdrive - 2010 997.2 C4S Coupe (Past): 2016 F30 340xi M-Sport -2013 535i xdrive 2008 E92 M3 - 2006 E90 325i 2002 E46 325xi - 1991 E30 325i |
Appreciate
0
|
04-16-2009, 11:01 AM | #14 |
-
11817
Rep 23,187
Posts |
yes is the simple answer. Soon it will be summer and it will all go away.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
04-16-2009, 05:43 PM | #15 |
-
11817
Rep 23,187
Posts |
here is another photo that shows the new smoked tails and the polished stock exhaust a little better since the car is now clean as well.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
04-16-2009, 06:42 PM | #16 |
Brigadier General
126
Rep 4,144
Posts |
Maybe it's the picture, but the inboard parts of the taillights look darker than the outer parts. Is this the case?
__________________
2017 F80 YMB.
|
Appreciate
0
|
04-16-2009, 06:48 PM | #17 |
-
11817
Rep 23,187
Posts |
i think you may be right. Im not sure how that happened. im not all that happy with them as i wanted them a little less dark anyway. i will drive around for a while and may go to blacklines after all.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
04-26-2009, 10:20 AM | #19 |
-
11817
Rep 23,187
Posts |
still waiting on my hids, spacers, and front tint. Soon i hope.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
05-06-2009, 04:26 PM | #21 |
-
11817
Rep 23,187
Posts |
the addiction continues. broke down and ordered encore hfc mid section. hoping it will add a little more exotic exhaust note and add a few hp as well. going with this and my stock polished rear section. also ordered matte front and side grille and rpi scoops. Just anxious for the parts to start rolling in. waiting on camaro 20,000k hids, front lens tint, macht snell spacers as well. also monday is my first track day at pacific raceways looks like its gonna rain?
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
05-14-2009, 03:06 PM | #22 |
-
11817
Rep 23,187
Posts |
just finished putting on the macht snell spacers 15/12 set up. quality product, didnt have a scale to weight them or would have posted that. used a little anti seize compound on the backs just in case. not sure if i like them or not yet. very subtle mod. makes my stock ride height look a little worse i think but will have to drive on it and see how i feel. first 2 are before and 2nd 2 are afters.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|