BE Bearings @ Redline360

Alex@Redline360 · 02-01-2021, 09:14 PM

Order here:

S65: BE Bearings BMW M3 S65 V8 E90/E92/E93 [Rod Bearings] (08-13) SP1527HK-STD-S65

S85: BE Bearings BMW M5 S85 V10 E60 [Rod Bearings] (05-10) SP1527HK-STD-S85

S54: BE Bearings BMW M3 E46 S54 [Rod Bearings] (01-06) SP1534HK-STD-S54

Accepting Pre-Orders. Most orders ship in about 1-2 months from the time of order (though we're fully reliant on BE Bearings). We recommend pre-ordering because all orders will go to pre-orders first and will be backordered again after that.

Fitment Information

2008-2013 BMW M3 E90 E92 E93 S65

Specs & Features

Applicable for BMW engines S65B40
Standard clearance (+0.001's also available)
Sold as complete set (8-cylinders)
Designed and manufactured by Clevite to BE Bearing specifications.
These bearings replace the factory BMW rod bearings. The original BMW bearings have too little clearance, which leads to premature bearing wear and can cause early engine failure. Furthermore, the factory BMW bearings are made from tin-aluminum which are 5-times harder than a softer lead-copper bearing design. A softer bearing is better for your engine and more tolerant of foreign particles suspended in your oil.

These BE Bearings feature a state-of-the-art Clevite Tri-Metal design with the Clevite Tri-Armor(tm) coating.

Lead-copper design for greater durability and easy tracking with oil analysis like Blackstone (recommended).

Designed with extra clearance to "fix" the BMW rod bearing design flaw.
Designed for use with factory 10W60 weight oils.
Tri-Armor coated for low conditions during cold start
Ideal for start-stop vehicles
Standard Size

02-01-2021, 09:14 PM	#1
Alex@Redline360 Lieutenant 57 Rep 572 Posts Drives: 2012 M3 E92 ZCP DCT Join Date: Aug 2015 Location: California iTrader: (0)	BE Bearings @ Redline360 - E90/E92/E93 S65 M3 Order here: S65: BE Bearings BMW M3 S65 V8 E90/E92/E93 [Rod Bearings] (08-13) SP1527HK-STD-S65 S85: BE Bearings BMW M5 S85 V10 E60 [Rod Bearings] (05-10) SP1527HK-STD-S85 S54: BE Bearings BMW M3 E46 S54 [Rod Bearings] (01-06) SP1534HK-STD-S54 Accepting Pre-Orders. Most orders ship in about 1-2 months from the time of order (though we're fully reliant on BE Bearings). We recommend pre-ordering because all orders will go to pre-orders first and will be backordered again after that. Fitment Information 2008-2013 BMW M3 E90 E92 E93 S65 Specs & Features Applicable for BMW engines S65B40 Standard clearance (+0.001's also available) Sold as complete set (8-cylinders) Designed and manufactured by Clevite to BE Bearing specifications. These bearings replace the factory BMW rod bearings. The original BMW bearings have too little clearance, which leads to premature bearing wear and can cause early engine failure. Furthermore, the factory BMW bearings are made from tin-aluminum which are 5-times harder than a softer lead-copper bearing design. A softer bearing is better for your engine and more tolerant of foreign particles suspended in your oil. These BE Bearings feature a state-of-the-art Clevite Tri-Metal design with the Clevite Tri-Armor(tm) coating. Lead-copper design for greater durability and easy tracking with oil analysis like Blackstone (recommended). Designed with extra clearance to "fix" the BMW rod bearing design flaw. Designed for use with factory 10W60 weight oils. Tri-Armor coated for low conditions during cold start Ideal for start-stop vehicles Standard Size
	Appreciate 0 Tweet