VF Superchargers x SSR Performance | SoCal's Authorized Dealer - FREE install!!

[SSR Performance]

We are proud to announce our partnership with VF Engineering to bring you the best in S65 Superchargers!

When it comes to supercharging your M3 high quality parts and a high quality install are the two most important components to ensure proper function and longevity. Here at SSR Performance, we've made it happen! After our in depth analysis of their kit, it is clear that VF Superchargers are the superior choice for any M3! VF Engineering has always set the bar high when it comes to their extensive R&D and their carefully designed components that construct the complete bolt-on S65 supercharger kits.

The kits are always upgradable and fully reversible. They are designed and tested to ensure healthy gains out of your vehicle with an otherwise stock setup!

Now a blurb directly from VF Engineering...

"VF-Engineering supercharged the BMW E92 M3 to create beastly power from this end of the world production high revving V8. Maintaining the original BMW quality, smoothness and reliability were the key factors in the VF design. This is where the VF software comes into full play. VF have harnessed reliability of Vortech superchargers and quality of VF custom software with their 15 years of supercharging experience to create the ultimate supercharger system.

VF use state of the art production manufacturing processes to create the highest quality supercharger kit on the market. A supercharger system designed with 4 stages of power, each stage up-gradable to the next, this piece of kit is for quality discerning enthusiasts only.

VF-Engineering chose to build this kit with the most efficient Vortech unit available – the V3 Si trim. Its super quiet helical cut gears make it super stealthy yet still remind onlookers that there is something different under the hood. The Si trim supercharger delivers a bigger mid range punch than the race “T-trim” yet is capable of supporting over 700hp. The centrifugal supercharger compressor maps ideally match the 8300 rpm revving S65 BMW Motorsport engine."

For a LIMITED TIME ONLY we will will be offering FREE installation with the purchase of a VF Engineering supercharger kit for your S65 motor!

VF540 Supercharger - Current Special $6495 installed! (MSRP $7995 + Installation)
540 hp / 370 ft/lbs
4.0-4.5 PSI
Vortech V3-Si Trim supercharger
ECU software flash
Cast manifold (non-cooled)
**Univ. Upgradeable manifold
[VF Part # VFK91-01]

VF595 Supercharger - Current Special $8495 installed! (MSRP $9995 + Installation)
595 hp / 394 ft/lbs
5.0-5.5 PSI
Vortech V3-Si Trim supercharger
Cast manifold (water cooled)
ECU software flash
[VF Part # VFK91-02]

VF620 Supercharger - Current Special $8995 installed! (MSRP $11,495 + Installation)
625 hp / 400 ft/lbs
6.0-6.5 PSI
Vortech V3-Si Trim supercharger
Cast manifold (water-cooled)
ECU software flash
[VF Part # VFK92-01]

VF650 Supercharger - Current Special $10,995 installed! (MSRP $12,950 + Installation)
650 hp / 420 ft/lbs
7.5-8.0 PSI
Vortech V3-Si Trim supercharger
Cast manifold (water-cooled)
ECU software flash
Requires 93 Octane and Full Sport Exhaust System
[VF Part # VFK93-01]

Kit Components
•Vortech V3 Si-Trim supercharger
•VF Hex Flash update to latest BMW software version
•Cast intake manifold
•Air water charge cooler system (Not included in VF540)
•OEM high density water radiator
•High flow water pump
•Bosch EV fuel injectors
•Set of new OEM spark plugs
•Type-R bypass valve
•Hard anodized 6061-T6 aluminum bracket
•Chrome-moly support bracket
•OEM serpentine belt and tensioner
•Cast aluminum intake
•K&N induction filter
•Hex Flash ECU tuning programming cable
•Install time 8/14 hours
Made in California, USA.

This deal does not come around often! Call us now and we will be more than happy to answer any and all of the questions that you may have!
We are also currently running a special on rod bearings starting at only $1250! (click link below)

S65 Rod Bearing Special! (Starting at $1250):
http://www.m3post.com/forums/showthread.php?t=1364644

Make your appointment today! Please do not hesitate to contact us now!

(800) 438-2808 or info@SSR-Performance.com