|
|
02-13-2012, 12:55 PM | #1 |
Lieutenant Colonel
240
Rep 1,972
Posts |
Stock Dyno for my 2012 E92 - 361 whp
Hey guys, I wanted to get a dyno up for my car before I start performance mods on it. I chose specialty Z as the dyno place solely based on the fact that they were close, had a dynojet, and worked on my cousins car lol. They are a Nissan Z specialty shop and do nothing for BMW's. Anyway this dyno was for mostly my info and I thought the car was pretty strong. I used the mototune method to break my car in aka no break in at all. So here it goes.
Runfile_001: 3rd gear - Max Power 341.81 Max Torque = 242.76 Runfile_002: 3rd gear - Max Power 343.35 Max Torque = 243.91 Runfile_003: 4th gear - Max Power 358.71 Max Torque = 262.22 Runfile_004: 4th gear - Max Power 359.94 Max Torque = 261.54 Runfile_005: 4th gear - Max Power 361.88 Max Torque = 262.44 Runfile_006: 5th gear - Max Power 362.65 Max Torque = 270.78 Highest whp was achieved in 5th gear but I took the best 4th gear run which was at 361 whp. This is a stock car with no engine or exhaust mods whatsoever. All runs were back to back with very little time in between. Correction is set at STD and with an SAE Correction the power is about 5HP less at 355. |
02-13-2012, 01:07 PM | #2 |
First Lieutenant
111
Rep 395
Posts |
seems pretty high for being bone stock..most people on here get 330-350...if all is true, then congrats you got a freak S65
__________________
E46 M3 S65 swap
|
Appreciate
0
|
02-13-2012, 01:14 PM | #3 |
Brigadier General
501
Rep 4,033
Posts |
That is a strong stocker, my car with bolt on's didn't hit those #'s, on that dyno.
__________________
16 F82 M4 DCT - ZCP - JB4 - 556WHP / 570WTQ
08 E92 M3 DCT - Bolt Ons - 60-130MPH 10.71s - 11.88 @ 118MPH - 377WHP ESS VT2-625 SC 60-130MPH 6.80s - 11.30 @ 129.3 MPH 586WHP / 379WTQ ESS VT3-750 - 60-130MPH 6.14s - 10.81 @ 135.13 MPH 690WHP/463WTQ Shift-S3ctor E92 M3 - 1/2 Mile Trap Speed WR - 174.13 MPH |
Appreciate
0
|
02-13-2012, 01:17 PM | #4 |
Lieutenant General
5234
Rep 10,614
Posts |
There is now some discussion about how the 2011 and 2012 models may have revised software that improves power, though I think the jury is still out on this explanation for what many would call "outlier" cars.
|
Appreciate
0
|
02-13-2012, 01:29 PM | #5 |
Colonel
84
Rep 2,792
Posts |
Wow, so you hit 377 whp on the exact same dyno with bolt ons? Or was it just the same type of dyno? If it was the exact same dyno, OP's car must make at least 20 HP more than yours, stock for stock.
|
Appreciate
0
|
02-13-2012, 01:37 PM | #6 |
First Lieutenant
34
Rep 372
Posts |
I think the real difference here is:
The newer cars do not have a charcoal filter stock, which is equivalent of an older car with a drop in filter. And using STD correction for that extra 5hp bump. The AFR trace and timing I've seen of the new cars stock ....is no different then previous years. I believe Sal@Evolve has seen the same as myself on this topic. |
Appreciate
0
|
02-13-2012, 01:49 PM | #7 |
Brigadier General
501
Rep 4,033
Posts |
I hit 355whp SAE on Specialty Z's dyno, I did 377 SAE on VF's dyno, different motors though.
__________________
16 F82 M4 DCT - ZCP - JB4 - 556WHP / 570WTQ
08 E92 M3 DCT - Bolt Ons - 60-130MPH 10.71s - 11.88 @ 118MPH - 377WHP ESS VT2-625 SC 60-130MPH 6.80s - 11.30 @ 129.3 MPH 586WHP / 379WTQ ESS VT3-750 - 60-130MPH 6.14s - 10.81 @ 135.13 MPH 690WHP/463WTQ Shift-S3ctor E92 M3 - 1/2 Mile Trap Speed WR - 174.13 MPH |
Appreciate
0
|
02-13-2012, 01:51 PM | #8 |
Lieutenant Colonel
240
Rep 1,972
Posts |
|
Appreciate
0
|
02-13-2012, 01:55 PM | #9 |
BimmerPost Supporting Vendor
8161
Rep 18,821
Posts
Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA
|
Great numbers, we're definitely seeing a trend here.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22 GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM |
Appreciate
0
|
02-13-2012, 01:58 PM | #10 |
Brigadier General
501
Rep 4,033
Posts |
Same dyno, my buddies DCT with bolt on's hit 358whp on the same dyno as well.
__________________
16 F82 M4 DCT - ZCP - JB4 - 556WHP / 570WTQ
08 E92 M3 DCT - Bolt Ons - 60-130MPH 10.71s - 11.88 @ 118MPH - 377WHP ESS VT2-625 SC 60-130MPH 6.80s - 11.30 @ 129.3 MPH 586WHP / 379WTQ ESS VT3-750 - 60-130MPH 6.14s - 10.81 @ 135.13 MPH 690WHP/463WTQ Shift-S3ctor E92 M3 - 1/2 Mile Trap Speed WR - 174.13 MPH |
Appreciate
0
|
02-13-2012, 02:42 PM | #11 |
Colonel
180
Rep 2,446
Posts
Drives: '11 E92 M3 DCT
Join Date: Jun 2011
Location: Calgary, Ab
|
Wow, great numbers! How many miles on your car so far? 91 Octane?
__________________
11' E92 M3 Space Grey | DCT | ESS VT2- 625 | Gintani Race (valved) + Quad Res Catless X-Pipe | KW Sleeve's | GC Camber Plates|Arkym Diffuser | Vorsteiner VRS Lip | P3 Boost Guage | Stud Conversion PHOTO's: Click Here ESS VT2 625 PHOTOS: Click Here |
Appreciate
0
|
02-13-2012, 03:06 PM | #13 |
Second Lieutenant
39
Rep 203
Posts |
nice numbers! I am curious does 414hp vs 420hp makes a difference?
To OP: the POWER button is on " RACE "?
__________________
2011 E90 DCT, sold
2011 E92 DCT ZCP | Akrapovic full setup | Evolve stage II | OEM grille | splitter | spoiler |
Appreciate
0
|
02-13-2012, 03:17 PM | #15 |
Lieutenant Colonel
240
Rep 1,972
Posts |
|
Appreciate
0
|
02-13-2012, 09:53 PM | #17 |
EXC MIII
103
Rep 627
Posts
Drives: on the wrong side
Join Date: Nov 2011
Location: 949
|
Interesting. My stock 2011 dyno'd at 363 STD on a dyno jet. Used the same break in method. As Tom said-seems like a trend.
__________________
2011 E90 M3 ZCP: Harrop | Remus | Vorsteiner | Arkym | BMW Performance | UUC | Recaro etc
Check out my build: Limey's E90 | Daily Driver Evolved |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|