|
|
07-23-2019, 05:48 PM | #1 |
Major
164
Rep 1,396
Posts
Drives: 06' E46 M3 ZCP
Join Date: Nov 2013
Location: Fairfax, VA
|
Endlink Clearance Issue After Ohlins Coil Install
There isn't enough clearance between the endlink and the front driver side strut carrier since Ohlins were recently installed. There's suspension noise coming from that side of the front end. Upon inspection, I noticed the tight space and believe that its causing the noise when driving. Anyone experience this? Should I have replaced the endlinks to adjustable ones? Could the endlinks be worn?
__________________
19’ F90 M5C | Signature VS-104 | M-Performance | IND | H&R
06’ E46 M3 ZCP | Karbonius | Ohlins | Vorshlag | Turner | Kassel | IND | Status Gruppe | Macht Schnell 03' E39 M5 | 100% Stock |
07-23-2019, 06:18 PM | #2 |
Major
352
Rep 1,005
Posts
Drives: GMC Sierra
Join Date: Jul 2012
Location: California
|
There should be spacers on the end links.
__________________
We grow food to feed the animals so we can eat the animals
|
Appreciate
1
M3ANMACHINE929.50 |
07-24-2019, 08:28 AM | #3 |
Major
164
Rep 1,396
Posts
Drives: 06' E46 M3 ZCP
Join Date: Nov 2013
Location: Fairfax, VA
|
Good call. I need to double check on whether they were actually installed. I know I accounted for them upon receiving them
__________________
19’ F90 M5C | Signature VS-104 | M-Performance | IND | H&R
06’ E46 M3 ZCP | Karbonius | Ohlins | Vorshlag | Turner | Kassel | IND | Status Gruppe | Macht Schnell 03' E39 M5 | 100% Stock |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|