|
|
08-29-2020, 12:25 AM | #1 |
Major General
898
Rep 6,285
Posts |
FS F&R E9X M3 brakes with calipers rotors pads lines
These brakes came off a E92 M3 with 70k kays use.
The brakes were refreshed by replacing F&R rotors pads which had minimal use on the street before a BBK was purchased. New front rotors are 30mm thick (measured 29.98mm check pics) rears are 24.0mm new (measured 23.85mm check pics) Front rotor is a two piece race rotor which is lighter in construction and prevents rotor warping. The pads are from EBC brakes in the UK and are 'red stuff' pads. To buy these from ECS tuning with current rates is $2471 AUD delivered and with customs duty and tax it would be another $320 or so (just under $2800) https://www.ecstuning.com/b-ecs-part...01004ecs01akt/ https://www.ecstuning.com/b-genuine-...3489228380304/ https://www.ecstuning.com/b-ebc-part...pads/dp31449c/ https://www.ecstuning.com/b-ebc-part...-set/dp31451c/ Also included are some stainless steel braided brake lines and F&R M3 calipers which have been painted red by previous owner. This kit was used on the street for a few months then a true BBK was fitted F&R. Great for the M3 or 1M owner who has worn brakes and would like a cheap like new kit to save themselves quite a bit of $ Postage Australia wide can be arranged at your expense for approx. $50-70 (depending on your location) If you have any queries please let me know thanks for looking! Price $sold Newcastle NSW Last edited by DR-JEKL; 08-29-2020 at 04:15 AM.. |
Post Reply |
Bookmarks |
|
|