|
|
06-24-2018, 04:02 PM | #1 |
New Member
0
Rep 9
Posts |
Problem aceleration BMW M3 S65
Hello how are you? My name is Lustik's. I'm from Spain and I'm new here. and I do not know if I write well here, I have an M3 e92 has 100,000 klm and I have a problem with the acceleration of the car. It turns out that in any gear at low revs, step on the accelerator completely and does not accelerate well, seems to snort through block 2 until it reaches
3000/4000 rpm Then it starts to give energy but not completely. in the diagnostic machine and ... no fault appears ... I have a delphi where I can see the degrees of each VANO. Here comes the dilemma of seeing the degrees that the computer tells me: Reference position of the VANOS input row: 130.3ºKW Actual position of row 1 of VANOS admission: 130.6ºKW REF row 1 VANOS exhaust: 129.0ºKW REAL row 1 exhaust VANOS: 128.7ºKW REF row 2 admission VANOS: 129.6KW REAL entry row 2 VANOS: 130.4ºKW REF row 2 exhaust VANOS: 127.7ºKW ROYAL row 2 exhaust VANOS: 125.5ºKW THIS MEASURED IT WITH THE ENGINE STOPPED (is it well done?) Here in Spain there is no information about the engine Vanos of the s65, a friend who has an M5 told me to make a valve timing adjustment and after all the work for my misfortune continues to do so. We put again in the computer, we look at the position data of VANOS Entry row 1 Ref 130ºkw Real 130.6ºkw Row 1 escape Ref129.0ºkw Real 128.7kw Entrance to row 2 ref 129.6ºkw Real 130.4 row 2 escape Ref 127.7ºkw Real 125.5ºkw this information is fine, please, someone who can help me. |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|