|
|
02-16-2020, 09:17 PM | #1 |
Private First Class
41
Rep 147
Posts
Drives: E92 M3
Join Date: Jul 2014
Location: DKI Jakarta
|
DCT problem after changing clutch
Hi i have a problem with my m3 ESS650 DCT.
I upgraded my clutch to SSP performance clutch and the problem appears 1. In the high RPM the car is vibrate when u push. 2. The gearbox get confused when i do kickdown on D mode or manual mode. The RPM hesitate a bit and the car vibrate. Then the clutch slip and suddenly the rpm jump into 7k I did gear adaptation trough ISTA , all procedure successful I found my dual mass flywheel is loose, so im afraid because of this the reading is confused so i change the new flywheel. I hope solve the problem but IS NOT . So i try to put back my old oem clutch, hopefully it back to normal as it no problem before. After i change clutch back to oem. The PROBLEM still there I reach to dead end, pls help Any solution? |
Post Reply |
Bookmarks |
|
|