Burger cowl filter for brake fluid check at HPDE events

jakob66 · 09-26-2015, 02:02 PM

I usually had to take the entire assembly off to check brake fluid level to tech my car. I saw this on someones signature here on the forum so I ordered and installed yesterday. The actual weight saving is only 2.39 lbs on my E92 M3 (with both cowls left/right replaced) but the easy access is still beneficial for track events and bleeding brake fluid.
After taking stock cowl off disconnect switch and pull switch housing.
I used wire to block the switch and zip tied the housing to the needless bolt.
I took even the small cover around the brake fluid reservoir off others might want to keep it.
For my purpose that look is clean enough.
I will report back in case of any adverse effects.

arter · 09-26-2015, 09:17 PM

Of course now you may be sucking engine compartment air into your cabin.......

jakob66 · 09-27-2015, 07:17 AM

Quote:

Originally Posted by arter

Of course now you may be sucking engine compartment air into your cabin.......

I don't think so. The stock filters are just lager and get the air from the same sealed area. I rode last night and the only thing I noticed is louder engine sound, not much though.

warp10 · 09-27-2015, 08:31 AM

what all came in the kit?

jakob66 · 09-27-2015, 10:47 AM

Quote:

Originally Posted by warp10

what all came in the kit?

Just a left and right filter that fit directly (tight press fit) into to slots of our cars.

MasterP · 09-28-2015, 10:21 AM

I just put quick releases there.

It makes it simpler and mainly because the plastic threads were getting worn out.

admranger · 09-28-2015, 12:43 PM

Quote:

Originally Posted by TrakBch

I just put quick releases there.

I makes it simpler and mainly because the plastic threads were getting worn out.

Have any details to share on those quick releases? Seems like a great approach.

warp10 · 09-28-2015, 01:00 PM

what quick release?

MasterP · 09-28-2015, 02:08 PM

I'll grab pics when I get home if I can.

But they are Honda S2000 trunk liner clips. You just pull 'em out and push them in.

BzsBimmer · 09-28-2015, 10:53 PM

That's an awesome idea Trkbch!
Part No. Description
91550-S10-013 CLIP, RING PULL

warp10 · 09-30-2015, 03:50 PM

just installed my set. super easy install and cheap. my guess is about 5 pounds saved on the m3.

jakob66 · 09-30-2015, 04:23 PM

Quote:

Originally Posted by warp10

just installed my set. super easy install and cheap. my guess is about 5 pounds saved on the m3.

Based on parts taken out it looks and feels like 5lbs but the actual weight saving is only 2.39lbs

still not bad and for sure easier access to brake fluid.

warp10 · 09-30-2015, 10:57 PM

Quote:

Originally Posted by jakob66

Quote:

Originally Posted by warp10

just installed my set. super easy install and cheap. my guess is about 5 pounds saved on the m3.

Based on parts taken out it looks and feels like 5lbs but the actual weight saving is only 2.39lbs

still not bad and for sure easier access to brake fluid.

guess I should have read better

I like the look and the ease of access.

nholmes · 06-30-2016, 05:34 PM

Necro bump but I ended up just covering those holes with vinyl wrap.

You can't get air into the cabin, but A/C still works fine. When I had them uncovered, it would indeed pull hot air into the car, even when the fan was off.

Hey, it's a track car.

DrFerry · 02-25-2023, 10:09 AM

Link to product:
https://burgertuning.com/products/bms-cowl-filters

Redd · 02-25-2023, 06:14 PM

They're dirt cheap now on Ali:

https://a.aliexpress.com/_msRjhbU

09-26-2015, 02:02 PM	#1
jakob66 Lieutenant 321 Rep 406 Posts Drives: M3 white, long list Join Date: Apr 2014 Location: TN iTrader: (2)	Burger cowl filter for brake fluid check at HPDE events I usually had to take the entire assembly off to check brake fluid level to tech my car. I saw this on someones signature here on the forum so I ordered and installed yesterday. The actual weight saving is only 2.39 lbs on my E92 M3 (with both cowls left/right replaced) but the easy access is still beneficial for track events and bleeding brake fluid. After taking stock cowl off disconnect switch and pull switch housing. I used wire to block the switch and zip tied the housing to the needless bolt. I took even the small cover around the brake fluid reservoir off others might want to keep it. For my purpose that look is clean enough. I will report back in case of any adverse effects. Attached Images __________________ ST-60 / MCS 3-way / Solid subframe / Full cage by JPMarketingllc.com / 315-30 square / GT-250 / JPmarketingllc.com Aero Stage2
	Appreciate 2 DrFerry6727.00 Tweet Quote

09-26-2015, 09:17 PM	#2
arter collecting toys 41 Rep 810 Posts Drives: M3 MCB Join Date: May 2008 Location: rochester, ny iTrader: (1)	Of course now you may be sucking engine compartment air into your cabin....... __________________ 2011 e92 M3 Monte Carlo Blue ESS 535 - gone but not forgotten 2015 cayman GTS - new toy 2006 SLK 55 AMG sold
	Appreciate 0 Quote

09-27-2015, 08:31 AM	#4
warp10 Lieutenant Colonel 776 Rep 1,718 Posts Drives: 2011 M3 Jet Black:ZCP, ZCV, ZP Join Date: May 2011 Location: Atlanta, Ga iTrader: (7) Garage List 2011 M3 [10.00] 2011 28i X3 [0.00]	what all came in the kit? __________________
	Appreciate 0 Quote

09-28-2015, 10:21 AM	#6
MasterP Colonel 721 Rep 2,342 Posts Drives: All the M's Join Date: Aug 2012 Location: Where do you want me? iTrader: (8)	I just put quick releases there. It makes it simpler and mainly because the plastic threads were getting worn out. Last edited by MasterP; 09-28-2015 at 02:09 PM..
	Appreciate 1 DrFerry6727.00 Quote

09-28-2015, 01:00 PM	#8
warp10 Lieutenant Colonel 776 Rep 1,718 Posts Drives: 2011 M3 Jet Black:ZCP, ZCV, ZP Join Date: May 2011 Location: Atlanta, Ga iTrader: (7) Garage List 2011 M3 [10.00] 2011 28i X3 [0.00]	what quick release? __________________
	Appreciate 1 DrFerry6727.00 Quote

09-28-2015, 02:08 PM	#9
MasterP Colonel 721 Rep 2,342 Posts Drives: All the M's Join Date: Aug 2012 Location: Where do you want me? iTrader: (8)	I'll grab pics when I get home if I can. But they are Honda S2000 trunk liner clips. You just pull 'em out and push them in.
	Appreciate 1 DrFerry6727.00 Quote

09-28-2015, 10:53 PM	#10
BzsBimmer Major General 3252 Rep 6,716 Posts Drives: '23 G80 FO M3, M3 & MY Tezzy's Join Date: Mar 2006 Location: Nor. Cal iTrader: (32)	That's an awesome idea Trkbch! Part No. Description 91550-S10-013 CLIP, RING PULL Attached Images
	Appreciate 1 DrFerry6727.00 Quote

09-30-2015, 03:50 PM	#11
warp10 Lieutenant Colonel 776 Rep 1,718 Posts Drives: 2011 M3 Jet Black:ZCP, ZCV, ZP Join Date: May 2011 Location: Atlanta, Ga iTrader: (7) Garage List 2011 M3 [10.00] 2011 28i X3 [0.00]	just installed my set. super easy install and cheap. my guess is about 5 pounds saved on the m3. Attached Images __________________
	Appreciate 1 DrFerry6727.00 Quote

02-25-2023, 10:09 AM	#15
DrFerry Field Marshal 6727 Rep 1,829 Posts Drives: '08 E92 M3 Join Date: Jul 2010 Location: Greenville, SC iTrader: (5) Garage List 2008 BMW M3 [5.25] 2015 BMW X5 [4.50]	Link to product: https://burgertuning.com/products/bms-cowl-filters __________________ '08 E92 M3 DCT Melbourne Red/Bamboo Beige Leather/EDC/SSP Spec-R DCT clutch discs/SSP Pro-Gold DCT Fluid/Quaife LSD/3:45 Final Drive by Diffs Online/BE Bearings & ARP Bolts/Vibra Technics Engine Mounts/M3 World HFC X-Pipe/LUX H8 180/BPM Sport DCT Tune/PFC Z-Rated Pads/ECS Brass Brake Caliper Bushings/Alex Shop Solid Sub-frame Bushings/Motul 600/Tint Last edited by DrFerry; 02-25-2023 at 07:21 PM..
	Appreciate 1 ///M Power-Belgium63083.00 Quote

02-25-2023, 06:14 PM	#16
Redd Brigadier General 3894 Rep 4,155 Posts Drives: 2010 BMW E92 M3 Dakar Edition Join Date: Jul 2015 Location: Malaysia iTrader: (0)	They're dirt cheap now on Ali: https://a.aliexpress.com/_msRjhbU
	Appreciate 0 Quote