|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
06-09-2017, 11:08 AM | #1 |
E90
167
Rep 821
Posts |
FS: StopTech Trophy BBK Replacement Rotor Ring & AeroHat (Rear)
I have the following items which I no longer need them since I sold my BBK. - Rear ST Trophy 355x32mm rotor ring (slotted, non-zinc-plated) + Trophy Aero Hat (anodized aluminum, NOT the lower spec powder coated black non-trophy version) + hardware: $275 picked up from 07010 NJ. The rotor is new and has never seen use, though it does have surface discoloration and surface rust from being stored over the years and following me through 2 moves. The Aero Hat has seen a season of use and has some superficial nicks in it around the outer rim from the previous owner that can be seen in the second picture; they don't affect anything functional. Happy to ship at buyer's expense. https://flic.kr/p/2nVY2pg https://flic.kr/p/2nVYrud Please feel free to contact me with any questions! Cheers, Jason Last edited by kamber; 04-15-2024 at 11:12 PM.. |
07-27-2017, 11:59 AM | #6 |
E90
167
Rep 821
Posts |
Ill get some up this weekend. Been swamped with work lately.
|
Appreciate
1
Leglessracing120.50 |
07-30-2017, 06:02 PM | #7 |
Lieutenant
121
Rep 551
Posts |
Great, look forward to it
__________________
E92 M3 - Frozen Black Race car sold
F80 M3 - Fire Orange sold E92 M3 - Frozen Grey Track day car Current |
Appreciate
0
|
07-30-2017, 07:39 PM | #8 |
E90
167
Rep 821
Posts |
Pictures have been uploaded. I apologize for the cell phone quality; if you need higher res photos just let me know and I'll snag some during the week sometime; my wife took the DSLR on a trip this weekend so it isn't available to me at the moment.
|
Appreciate
0
|
08-01-2017, 05:18 PM | #9 |
Lieutenant
121
Rep 551
Posts |
Thanks for the pics. So just to clarify, the mounting hardware is the brake caliper brackets? Could you tell me what the caliper mounting holes gap is please? I'm hoping I can use the rear setup
__________________
E92 M3 - Frozen Black Race car sold
F80 M3 - Fire Orange sold E92 M3 - Frozen Grey Track day car Current |
Appreciate
0
|
08-02-2017, 01:19 AM | #11 | |
E90
167
Rep 821
Posts |
Quote:
I would be happy to take any measurements for you, but I'm not quite sure what the "caliper mounting holes gap" that you're speaking of is. Would you be able to use MS paint and draw a red circle around the area for me? I can easily take measurements with digital calipers, just need to know where I'm measuring. Thanks much! |
|
Appreciate
0
|
08-03-2017, 10:07 PM | #13 | |
Captain
17
Rep 638
Posts |
Quote:
|
|
Appreciate
0
|
08-05-2017, 01:33 PM | #14 |
Lieutenant
121
Rep 551
Posts |
Don't have any yet, but have been told that stoptech kit works well with ap racing kit,
__________________
E92 M3 - Frozen Black Race car sold
F80 M3 - Fire Orange sold E92 M3 - Frozen Grey Track day car Current |
Appreciate
0
|
09-05-2017, 10:24 AM | #16 |
Boost
1354
Rep 3,691
Posts
Drives: 135i M-Sport
Join Date: Feb 2014
Location: Valley of Silicon, CA - United States
|
Do you know if the bolt patterns are the same on the Trophy aerohats as the ST60 kit? Wouldn't might backup rotors for my setup (355x32)
__________________
F80 M3 TrackBoi, Z4MC GarageBoi, 1M Clone StreetBoi
|
Appreciate
0
|
09-06-2017, 01:27 AM | #17 |
E90
167
Rep 821
Posts |
Bolt pattern SHOULD be the same. Not 100% sure though. You can email or call David @ Zeckhausen to confirm this definitively.
https://www.zeckhausen.com/ Let me know if you end up wanting to pull the trigger! |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|