BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Wheels + Tires Sponsored by The Tire Rack
  TireRack

KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK!
Post Reply
 
Thread Tools Search this Thread
      11-24-2017, 05:50 PM   #89
SignatureJames
Lieutenant Colonel
United_States
231
Rep
1,522
Posts

Drives: 2023 BMW M5 Competition
Join Date: Jun 2010
Location: Irvine, CA

iTrader: (15)

ooooo that looks meaty!

Quote:
Originally Posted by tom @ eas View Post
Quick teaser of Hoonigan SuperLap E46 M3 with Titan7 T-R10s (square setup):

Vehicle: BMW E46 M3
Suspension: KW Clubsports
Wheels: Titan7 T-R10 Wheels, Satin Grey finish

Specs
F: 18.0" x 10.5", ContiExtreme 275/35-18
R: 18.0" x 10.5", ContiExtreme 275/35-18

__________________
"if you ain't first, you're last!"

1992 Acura NSX / 1998 Acura Integra Type R / 2023 BMW M5 Competition / 2019 Porsche Cayenne S / 2023 Porsche Taycan GTS Sport Turismo
Appreciate 0
      11-26-2017, 07:46 PM   #90
dmitriyo
overnight engineer
246
Rep
179
Posts

Drives: 2010 E90 M3
Join Date: Jan 2011
Location: LA

iTrader: (2)

Ordered a 10.5 squared setup via EAS. T-R10s for the E90 M3 in Titanium Satin finish. Looking forward to getting them mounted.
Appreciate 0
      12-31-2017, 11:22 PM   #91
Vybz
Captain
Vybz's Avatar
Jamaica
132
Rep
673
Posts

Drives: Adidas and Puma
Join Date: Sep 2010
Location: Kitsap County, WA

iTrader: (10)

Garage List
2012 BMW M3  [8.60]
I asked Santa for the Titan 7 TS5 in a 18x11, doesn't look like it'll happen this year, but there is always next year lol.

Btw... nice job Titan 7 in the Euro Car Tuner GP. Your cars did well, and it was nice seeing the wheels go through a rite of passage.
__________________
Highway Star Garage / Ruined Luxury Auto
InstaGram: Ruinedluxury_vybz
NA1 NSX - Storage 2nd Gen Taco - Daily
Appreciate 0
      03-27-2018, 12:47 PM   #92
TooTheMax
New Member
3
Rep
20
Posts

Drives: 2011 BMW M3 E90
Join Date: Feb 2018
Location: Connecticut

iTrader: (0)

Quote:
Originally Posted by tom @ eas View Post
E90 M3 w/ Titan7 T-S5

- AP Racing 7100/7150 BBK
- KW HAS Sleeve Kit


F: 18.0" x 9.5", Nitto NT555 265/35-18
R: 18.0" x 10.5", Nitto NT555 285/35-18



Satin Titanium Finish








Tom,

Awesome wheels! I know its been a while and Titan7 has come along nicely !!

That being said, I've got to know two things:
1. What is the trunk lid/spoiler on this E90?? Its gorgeous
2. Would spacers still be feasable on a 9.5 F 10.5 R set up?

Thanks for the insight.

Appreciate 0
      03-27-2018, 12:53 PM   #93
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
8067
Rep
18,788
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by TooTheMax View Post
Tom,

Awesome wheels! I know its been a while and Titan7 has come along nicely !!

That being said, I've got to know two things:
1. What is the trunk lid/spoiler on this E90?? Its gorgeous
2. Would spacers still be feasable on a 9.5 F 10.5 R set up?

Thanks for the insight.

Challenge trunk, no longer available. No spacers are needed, the offsets are dialed in just right.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      05-31-2018, 08:08 AM   #94
dmk08
Gone Fishin’
dmk08's Avatar
United_States
7315
Rep
12,125
Posts

Drives: Walks
Join Date: Jul 2012
Location: Atlanta

iTrader: (19)

Any update on 19s? Its past 1st quarter and I'm personally waiting for these.

I see they have 19s for F8x now...
Appreciate 0
      05-31-2018, 11:32 AM   #95
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
8067
Rep
18,788
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Quote:
Originally Posted by dmk08 View Post
Any update on 19s? Its past 1st quarter and I'm personally waiting for these.

I see they have 19s for F8x now...
Soon. Will update the thread when close to release.
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      05-31-2018, 12:00 PM   #96
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
8067
Rep
18,788
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
dogbone sharing his review on the Titan7 R10s, visit his detailed build thread here: http://www.m3post.com/forums/showthread.php?t=1158445









Quote:
Originally Posted by dogbone View Post
In my previous post, I mentioned that there was one other change done to the car this week.

Since early 2017, I've been wondering what to do about my wheel setups. I have been driving three sets of 10.5" square Apex ARC-8's. Overall, I have had good luck with my Apex rims. And they're still running fine. And I like the guys at Apex. They have always been nice to me. Occasionally, a rim will bend and not be able to balanced so I would replace it. And Apex has a friendly replacement policy to the original purchaser. But as my grip has continued to go up and my lap times have continued to improve, I have wondered if I should be driving on a wheel with a higher spec---stronger, stiffer, etc. The hub incident was the final push that made me decide to push the Go button on refreshing everything in the rotating package---hubs, studs, and now wheels. (Brakes/rotors were already new.)

Here are the things I was hoping for if I were to switch to a new wheel:

-Stronger: It would be nice if I could reduce or eliminate bends. (I never cracked an Apex wheel.)
-Stiffer: Aside from reducing bends, a stiffer rim would provide a more consistent feel, and I have had some conversations with some knowledgable people who believe a stiffer rim could resist stud breakage better because it would not deform as much under high loads. I was very interested in that.
-Lighter: Reducing rotating mass is always beneficial, but was not my primary consideration.
-Different offset from my current ET27: I have desired to try something in the ET 22-25 range on 10.5".
-Reasonable cost: I wanted to be able to afford to replace all three sets at the same time if possible.
-Warranty policy: It would be nice if the company would give some warranty consideration with track use. There are plenty of forged wheel options out there, but in most cases, they don't provide any warranty help for damage done on track.
-Different looks: I figured a change in styling and color could be cool. I'm not trying to be a style hound, but a new look wouldn't be a bad thing.

That's not a demanding list, is it? Actually, I didn't really find much that could satisfy all those wishes. The warranty really was the biggest hang up. No one wants to warranty track stuff. Anyway, I wasn't in a hurry so I just sorta waited.

Then last summer, I was chatting with Steve at EAS, and he mentioned there was a new forged rim coming to market soon that might be worth a look. He said the company was new, but the founder had worked in the wheel industry for a long time. It was called Titan 7. I looked into them a bit, and thought the wheels were attractive, but they weren't shipping yet, so I didn't put much effort into it.

Then in January, I was at Chuckwalla doing a Bimmer Challenge, and Titan 7 had a booth. So, I wandered over to say hi and ask a few questions. Eddie Lee, who is the founder, was in the booth and we ended up chatting for 45 minutes. He's a very nice guy who has a lot of industry experience and he patiently answered all my dumb questions. After that conversation, I was interested in the wheels. The T-R10 seemed to meet all the criteria in my list:

-They are claimed to be very strong due to a 10,000 ton press being used to shape the aluminum.
-This 10,000 ton pressing process also results in the rims being quite stiff and resistant to deflection under high-G loads.
-They are lighter than the ARC-8's. ARC-8 - 20.5 lbs versus T-R10 - 19.5 lbs (The T-S5 style is 18.8 lbs.)
-The offset is ET 25.
-MSRP is $1920 for a 10.5" square set.
-The wheel has a limited lifetime warranty to the original purchaser, and Titan 7 does give warranty consideration to wheels that see track use. What they don't warranty is if the wheel has an obvious direct impact from something like a crash or has been jammed into a curb. But if the wheel has some structural issue that is a result of use on track, they are willing to stand behind the product.
-The T-R10 is a 10-radial spoke wheel. And I was considering black, so the look would be quite different than my current silver ARC-8 wheels.

So, after a long consideration process, I decided to jump in with both feet. I've replaced all 3 sets of Apex with Titan 7 T-R10's. I worked with EAS for the purchase. They always make things easy. And now I have all 12 rims in-hand. My front porch looked ridiculous. I looked like a distributor......haha!

Other notes of interest for me:

-Eddie had a 20 year run with Mackin Industries. (Mackin imports Rays Engineering, Yokohama wheels, etc.) While he was there, he developed wheel programs for BMW factory race cars and other pro teams which is a pretty demanding world. He's worked on creating private labels. He's been on-site at many production plants in Asia. Basically, he has dealt with wheels his whole career. In fact, his journey in his business reminds me of my journey in my music business. We both worked for other corporations for a long time, gained a bunch of knowledge from all the time in the trenches, and we both figured out how to build a small business around the knowledge we gained over the years. When someone comes up through the ranks like that, they have seen a business from all sides. That's how it worked for me, and Titan 7 seems to be the result of similar experiences. That's appealing to me.

-I asked about production. Due to the small size of the company, I was worried that maybe T7 was piggybacking off some other larger production runs and just slapping their logo on something. Nope. The answer was interesting. He made a relationship with an industrial manufacturer that had not been making consumer products but wanted to. They had some impressive machinery like 10,000 ton presses. He has setup all the business logistics with this manufacturer from scratch. This is not a generic run-of-the-mill piggyback wheel that's the same as everyone else with a different logo slapped on it.

-Regarding the 10,000 ton press and general forging - My knowledge on forged rims was lacking. So, I asked a bunch of questions. I don't want to dwell on what a forged rim is because there's lots of great info out there, but I'll touch on a couple things. Forged wheels are desirable because you start with a solid cylinder of aluminum, heat it up and then you press it into an initial shape with powerful presses. The more pressure you use when you press it, the denser/stronger the rim material gets. (They say the "grain structure" of the metal is improved.) According to Eddie, most forged rims are made with 6,000 and 8,000 ton presses. 10,000 ton presses are more rare. (He said only one other wheel maker is using a 10,000 ton press.) And with a forged rim, there's no potential for microscopic porosity, which is air trapped in the metal. Cast wheels start as molten aluminum and the molten metal is poured into a shape. When you start with a liquid and pour it into a shape, the possibility of getting air trapped in the metal exists, which is not ideal for overall strength. And you don't get the benefit of the pressure from the press. (You compensate by putting more metal into the wheel, i.e. the wheel is heavier.) Flow Formed wheels (like Apex) which use spinning during the casting process produce better results. But the strength and stiffness per pound just isn't the same as a forged wheel. So, porosity is just not an issue with forged rims, and having a denser and more consistent rim material allows you to make a light wheel because you can use less material, but it's still very strong and stiff. Ok, enough about forging....I'm not the expert on this topic.

-Between the two wheels offered by Titan 7, there is a weight difference. In the 10.5" size: T-S5 18.8 lbs vs. T-R10 19.5 lbs. I asked Eddie about this. He said both wheels are built to be very strong. But they decided to beef up the T-R10 a bit more. According to him, the T-R10 is the stronger of the two. And I guess that's not really a surprise. It is 10 spokes coming straight off the hub, versus the T-S5 with 5 spokes, and the T-R10 is heavier so there's more material to work with. He was very clear that both were built like "tanks", but that the T-R10 was a bit of a beefier tank. For me, looks was bottom of the list on importance. The TS-5 is a sexy wheel, but I was totally fine with the radial look of the T-R10. And while weight is a consideration, strength was much more important, so if the T-R10 is stronger due to the additional 0.7 lbs, I'm fine with that. It's still a full pound lighter per wheel than the what I had.

-I like the ET25 offset. On Apex, I had ET27 with a 3mm spacer. Now, after test-fitting, I've seen I can run most tracks without a spacer. The clearance to the spring perch is totally fine. The other consideration I have to deal with is my supercharger intake. Buttonwillow's Off-Ramp corner is brutal when you have tight tolerances. The corner is very tight, slow, and uphill......it's just nasty. The tire just jams up into that wheel-well with the steering wheel turned hard. I may run the spacer at Buttonwillow to help preserve the intake and now I'll be even further away. And I appear to have the room on the outside. So, yeah the ET25 offset is nice for my purposes.

-Along the way, I've learned new terms such as "camber stiffness" which has to do with how a wheel deals with deflection and deformation under high G's. He claims that the T7 wheels resist high-G loads extremely well. This makes for a more consistent driving experience.

-Their wheels have been run in 24 hour races and were fine.

-Knurled bead - I was happy to see that feature. It's a nice touch to try to reduce tires creeping around the rim (yes Hoosier I'm talking to you!).

-The wheels come with wheel stems. Cool. No one told me. I bought stems for the new wheels, and now I...uhh....have extra stems. hehe

So, with the wheel change complete, I have refreshed the entire rotating package of the car---wheels, hubs, studs, lug bolts, the Essex brakes/hats/rotors are very new (8 days on the fronts, 3 days on the rear), so I'm hoping that the car is good-to-go for awhile. I am quite eager to go out and see what everything feels like! And I'm quite happy with how the wheels look!----even though I said it wasn't high on my list.....

PS. It's important for me to reiterate that I didn't leave the Apex brand due to any specific unhappiness. I just finally made a decision that I should drive a higher spec wheel because the car is experiencing very high forces now (as the cracked hub so wonderfully illustrated). I would happily recommend Apex wheels to anyone looking for Flow Formed wheels. They are a very nice company to deal with. (I have a square set of 9.5" ARC-8's that I'm keeping for my E92 M3 street car, you know, just in case I take that baby to the track!)
__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 2
XKxRome0ox1587.50
vincE92M3558.50
      05-31-2018, 12:15 PM   #97
inTgr8r
Lieutenant General
inTgr8r's Avatar
Canada
2422
Rep
11,665
Posts

Drives: M2 Comp
Join Date: Mar 2006
Location: Toronto

iTrader: (10)

Absolutely love my Titan TS-5
They are my dedicated track wheels, but I just hate taking them off to put the stockers back on.
I just might pick up another set for street rubber.

Name:  Titan-TS5.jpg
Views: 6277
Size:  789.0 KB
__________________
'21 M2C Hockenheim Silver
'18 718 Cayman S Lava Orange (sold)
'13 E92 M3 Santorini Blue (sold)
'07 Z4 M Coupe Alpine White (sold)
Appreciate 4
tom @ eas8066.50
dmk087315.00
6ixSpd5996.50
slcook541859.50
      05-31-2018, 02:33 PM   #98
dmk08
Gone Fishin’
dmk08's Avatar
United_States
7315
Rep
12,125
Posts

Drives: Walks
Join Date: Jul 2012
Location: Atlanta

iTrader: (19)

Quote:
Originally Posted by inTgr8r View Post
Absolutely love my Titan TS-5
They are my dedicated track wheels, but I just hate taking them off to put the stockers back on.
I just might pick up another set for street rubber.

Attachment 1833966
Man the finish is so nice on these... for 2k cant wait for 19s..
Appreciate 0
      06-03-2018, 08:02 PM   #99
Move Over
Colonel
Move Over's Avatar
1256
Rep
2,491
Posts

Drives: M3 6MT
Join Date: May 2015
Location: Peninsula

iTrader: (9)

Any chance you have Camaro fitments?
__________________
2010 E92 M3 DCT
Appreciate 0
      06-13-2018, 12:03 PM   #100
nycplumber
Major
682
Rep
1,221
Posts

Drives: slow
Join Date: Apr 2016
Location: nyc

iTrader: (0)

What size tires are you guys running with this set up?
Appreciate 0
      06-13-2018, 12:09 PM   #101
kevin @ eas
BimmerPost Supporting Vendor
kevin @ eas's Avatar
United_States
2895
Rep
21,660
Posts


Drives: 2015 BMW M4
Join Date: Nov 2011
Location: Anaheim

iTrader: (22)

Quote:
Originally Posted by nycplumber View Post
What size tires are you guys running with this set up?
I normally run with a 265/35/18 front and a 285/35/18 on the staggered setups. Those 2 sizes I have found have the most performance tire options.
__________________
Kevin S. | european auto source (eas)
email: kevin@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x31

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      06-13-2018, 12:16 PM   #102
nycplumber
Major
682
Rep
1,221
Posts

Drives: slow
Join Date: Apr 2016
Location: nyc

iTrader: (0)

Thanks for the quick reply. These 100% are my wheel choice, form AND function.
Appreciate 0
      06-13-2018, 02:23 PM   #103
dparm
Stop the hate, get a V8
dparm's Avatar
United_States
3848
Rep
8,625
Posts

Drives: C7 Corvette GS, AMG C63 S
Join Date: Jun 2013
Location: Frisco, TX

iTrader: (1)

Quote:
Originally Posted by tom @ eas View Post
EAS is proud to release Titan7's fully forged T-R10 and TS5 wheels for the E9X M3.

Any plans for domestic fitments? I really don't want to drop $5k on Forgelines, CCWs, HREs, etc.
__________________
Now: 2017 Corvette Grand Sport, 2021 AMG C63 S sedan
Past: 2011.5 M3 sedan ZCP
Appreciate 0
      06-13-2018, 02:37 PM   #104
kevin @ eas
BimmerPost Supporting Vendor
kevin @ eas's Avatar
United_States
2895
Rep
21,660
Posts


Drives: 2015 BMW M4
Join Date: Nov 2011
Location: Anaheim

iTrader: (22)

Quote:
Originally Posted by dparm View Post
Any plans for domestic fitments? I really don't want to drop $5k on Forgelines, CCWs, HREs, etc.
Nothing on the books as of yet for domestic fitments. Titan 7 has developed a few concepts wheels they are trying out on domestics. We will definitely make the announcement if Titan does release new fitments for other cars.
__________________
Kevin S. | european auto source (eas)
email: kevin@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x31

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      06-13-2018, 03:17 PM   #105
dparm
Stop the hate, get a V8
dparm's Avatar
United_States
3848
Rep
8,625
Posts

Drives: C7 Corvette GS, AMG C63 S
Join Date: Jun 2013
Location: Frisco, TX

iTrader: (1)

Quote:
Originally Posted by kevin @ eas View Post
Nothing on the books as of yet for domestic fitments. Titan 7 has developed a few concepts wheels they are trying out on domestics. We will definitely make the announcement if Titan does release new fitments for other cars.
Sounds good -- send me a PM if you need someone for test fitments.
__________________
Now: 2017 Corvette Grand Sport, 2021 AMG C63 S sedan
Past: 2011.5 M3 sedan ZCP
Appreciate 0
      06-19-2018, 03:21 PM   #106
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
8067
Rep
18,788
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
F80 M3 with 19" Titan T-S5s mounted and out the door

Wheels: Titan7 T-S5 19x9.5F, 19.10.5R, Satin Titanium Finish w/ optional T7 centercaps
Tires: Bridgestone RE71 255/35-19, 275/30-19






__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 0
      06-19-2018, 03:29 PM   #107
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
8067
Rep
18,788
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
E36 M3 with Titan7 R-10 TracSpec R-10, Satin Titanium.

Wheels: Titan7 R-10 18x9.5 Square, Satin Titanium Finish
Tires: Falken 615K+ 265/35-18 Square







__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 1
mikejnc18.00
      06-21-2018, 05:58 AM   #108
MJBO
Major
MJBO's Avatar
Australia
2496
Rep
1,443
Posts

Drives: 2023 G81 M3 Touring
Join Date: May 2012
Location: Melbourne, Australia

iTrader: (0)

Garage List
Any word on 19 inch R10s? Would love a set of these, but don’t really want to drop to 18s on my E90 M3.
Appreciate 0
      06-21-2018, 05:29 PM   #109
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
8067
Rep
18,788
Posts


Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (19)

Garage List
2018 BMW i3s  [0.00]
2010 BMW M3  [6.50]
2015 BMW M4  [5.25]
Titan7 twins:





__________________
Tom G. | european auto source (eas)
email: tom@europeanautosource.com · web: https://europeanautosource.com· tel 866.669.0705 · ca: 714.369.8524 x22

GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
Appreciate 1
DreamTime863.50
      07-03-2018, 09:53 PM   #110
macdude357
Captain
macdude357's Avatar
467
Rep
818
Posts

Drives: IB E90 M3
Join Date: Sep 2015
Location: San Diego

iTrader: (7)

Forget about BBK clearance, these wheels have "wine" clearance. I stopped by the central coast on my way home from Laguna Seca and picked up some wine. I was able to fit 1/2 case of wine in each wheel
Attached Images
 
Appreciate 3
roastbeef11574.50
SYT_Shadow11421.00
IanMan382.50
Post Reply

Bookmarks

Tags
eas, forged wheel, t-r10, titan7, ts5, ts7

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:39 AM.




m3post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST