|
|
|
KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
Post Reply |
|
Thread Tools | Search this Thread |
11-10-2013, 02:34 AM | #1 |
Banned
17
Rep 394
Posts |
Wheel bolts too long?
I have 12mm and 15mm spacer sets from Macht Schnell, along with their extended bolts. Can I use these extended bolts on the factory 19" wheels without the spacers? Or would they be too long and thus not secure the wheel properly? I would assume there is some wiggle room with bolt length, but I don't know specifics and search was unproductive.
|
11-10-2013, 08:41 AM | #2 |
Major General
2738
Rep 6,734
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
I hate to ask the obvious but what happened to your OEM lugs? Extended lugs without spacers are not a good idea. Either the front or rear (can't remember) has something behind the hub that can be hit by a lug that's too long.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M |
Appreciate
0
|
11-11-2013, 07:43 PM | #5 |
Brigadier General
3940
Rep 3,981
Posts |
Nope. They likely will not clear and cause issues when trying to turn the wheel. If you don't believe us. Go out and try it, turn the wheel by hand and don't drive it, you'll see why.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|