 |
|
 |
|
|
|
| 08-05-2011, 04:50 PM | #1 |
|
Major
 121
Rep 1,451
Posts |
FS 19" M3 Offset Radenergie R10s
THREAD HAS BEEN UPDATED WITH PICTURES OF THE WHEEL REPAIR. THE REPAIR IS NOT REALLY VISIBLE GIVEN HOW SLIGHT THE DAMAGE WAS IN THE FIRST PLACE. Guys, I hope you are doing well. Up for sale are my barely used set of 19" radenergie R10 wheels. These are the only set of M3 specific offset radenergie wheels that I've seen on this forum. Reason for sale I've outlined them below: 1) I was on the fence about these wheels before purchasing them purely because I loved the OEM 220Ms, but I went ahead and bought them because I kept thinking about these wheels. While they looked good, they were giving me some issues which eventually steered me back to the 220Ms. 2) While the fitment was great in the rear, the fronts looked a bit weak because of the lip design. So I went ahead and used them with 12mm spacers but then got some vibration issues. The shop, Imola Motorsports in Minneapolis, spent hours trying to diagnose the reason for the vibrations and finally identified a small bend in the wheel as the reason. To this day I am confused as to how the wheel could have bent as I had less than 1000 miles on the wheels and don't recall hitting any significant potholes or bumps that would bend 19" forged wheels. The wheel company refused to cover the expense for sorting out the bend and gave me two options: I could just have the inner lip fixed for $80 or have the barrel replaced for $300. Under the advice of my shop, I opted for the inner lip fix as my shop reassured me that this would be sufficient to get rid of the vibration. By this time I had made up my mind that the wheels would be sold. The shop has received the wheels from the company with the inner barrel fixed. The shop measured the run-out on the inner barrel post repair and all seems to be in spec. The wheel has not be tested for vibrations as I've since moved out of the twin city. However, the shop is not happy with the repair because it seems like the company took off some material from the wheel to sort out the bend. The company reassures us that they have used this process to fix other wheels without any issues. Personally, I hate any half measures so I've requested a quote to replace the inner barrel and the outer lip. I will update this thread once I have this number, however I figured that I would create a FS thread for anyone who would be interested in the set "as is" Price - $2000 shipped anywhere in the continental US. I paid $4,700 for the set new. Please note that shipping is included and that I am not asking for paypal fees. Specs: Fronts 19X8.5 ET 25 (1.5-2 inch lip appx) 245 or 255 tire size recommended with 12 mm spacer for more flush fitment Rears 19X10 ET 19 (4 inch lip) 275 tire recommended. Finish - painted silver. Construction - 3 piece forged. Weight - have not weighed them but they seem to be a few pounds heavier than the stock 220 Ms As mentioned in the monologue above, I am getting pricing info for replacing the inner barrel and the outer lip on the bent front wheel. As per the wheel company, the wheel is good to go with bend repair that they did. Apart from the bend repair, the wheels are in great shape. No rash, scratches, etc. The wheels are currently off the car and I will post pictures soon. For pictures and forum members' reactions, please refer to the threads below: http://www.m3post.com/forums/showthr...ght=radenergie http://www.m3post.com/forums/showthr...ght=radenergie Last edited by ajvee; 09-14-2011 at 06:45 AM.. |
| 08-05-2011, 05:46 PM | #3 |
|
Colonel
 
2352
Rep 2,829
Posts
Drives: E36M,E46M,E90M,X5M,i3,M2,i8
Join Date: Dec 2007
Location: SoCal. in the hood!!!
|
Good price g/l
__________________
 BMW I12 i8 Frozen Yellow- H&R springs, 22" Radenergie F10 Monoblock Forged /// F87 M2 Aw -Vorsteiner Aero Kit, VFF-107,Macht Schnell-Springs,VF-Engineering/Hex tuning Stage Two,ER DP,Stock Exhaust,Drop-In Bmc Filter,AA Intercooler,FTP Charge pipe+boost pipe/// Wish list :Mexico delivery 2024 BMW M2 (G87) |
|
Appreciate
0
|
| 08-05-2011, 06:13 PM | #5 |
|
-
11818
Rep 23,187
Posts |
These were one of the first wheels I looked at. Haven't seen any m3 with them until yours.
__________________
 02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
|
Appreciate
0
|
| 08-05-2011, 06:21 PM | #6 | |
|
Major
121
Rep 1,451
Posts |
Quote:
|
|
|
Appreciate
0
|
| 08-08-2011, 08:44 PM | #9 |
|
Major
678
Rep 1,469
Posts |
Bump for great seller and legit guy.....
 (av-still says "12 inch" under specs  )
__________________
Lambo Huracan, Cherokee SRT, C8 on order.
Sold- 458, GT3, f80 M3, e82 1M, f87 M2, e30 M3, e90 M3, e36 M3, e34 M5, e36 M3, e30 M3........ |
|
Appreciate
0
|
| 08-08-2011, 09:04 PM | #10 | |
|
Major
121
Rep 1,451
Posts |
Quote:
|
|
|
Appreciate
0
|
| 08-31-2011, 06:53 PM | #14 |
|
Major
121
Rep 1,451
Posts |
I know bumps are annoying guys which is why I am trying to do them after my ad goes to the 3rd page
 Have had some interest. Please feel free to reach out to me with any questions. |
|
Appreciate
0
|
| 09-25-2011, 12:28 PM | #21 |
|
Major
141
Rep 1,423
Posts
Drives: '07 N54 e90, '10 N54 e93, TBSS
Join Date: Feb 2010
Location: Gilbert, AZ
|
i love these wheels on the CLS, very original for the M3. looks great!
__________________
E90 - H&R Touring - M3 Front Arms - Work Genosis GS-1 19x9+30 x10+26 225f 265r stretch - AA FMIC - AR DP - Cobb E30 Map +160rwhp/+200rwtq
E93 - Style 95 - RB Turbo - AR DP - Evolution RW FMIC - PTF E50 +242rwhp/+234rwtq |
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
