|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
11-11-2020, 03:39 PM | #1 |
Private First Class
110
Rep 189
Posts |
EDC function not working after trying to code ZCP mapping to non-ZCP m3
Hey guys, looking for some help. Was trying to code my 2010 e90 m3 non-zcp with edc bilstein b6 to zcp shock mapping but something happened along the way where my edc is now stuck only in one firmness regardless if I put it in comfort or sport mode. The edc light on the three button control will light up if you push it but no change in firmness.
Furthermore, hitting the M button does not change the firmness setting from comfort to sport or normal as selected in the mdrive. Basically all it does is change the servo and the throttle response. I noticed immediately after when things went wrong that I no longer had a EDC ecu module show up in NCSexper when I go to select ecu. So I checked FA and vo coded back $2vf, which brought back the edc ecu, and I can also manipulate the edc ecu module as well. But even after I try to code the edc to stock via the VO in ncsexper mode, the problem persist and I still do not have actual functioning EDC. Any insights? I'm willing to reset everything back to stock, my worries is that I no longer have the original VO profile of my car or something. Thanks in advance for any advice! |
11-17-2020, 07:54 AM | #2 |
mTekMods
2142
Rep 2,902
Posts |
update the VO for edc then code the CAS, FRM, and edc module in that order.
__________________
2011 Frozen Black/Fox Red E90 M3 650+WHP
G-Power Supercharged First DCT to Manual Conversion Worldwide KW CS, BBS RI-A, BW Headers, Snow 2.5 |
Appreciate
1
zhan28109.50 |
11-21-2020, 10:44 AM | #3 |
Private First Class
110
Rep 189
Posts |
This worked. Thank you! Zcp shock mapping now properly coded with bilstein b6 edc and h&r. Difference is subtle, but firmer in all settings. Biggest difference is the car seems more settled when going over bumps and breaks at speed, which actually makes a huge improvement to handling.
|
Appreciate
0
|
01-17-2023, 09:53 PM | #4 |
Private First Class
126
Rep 163
Posts |
Hi guys, I'm having a similar issue trying to code ZCP EDC after installing swift springs. Looks like all the 9005 lines I changed to 9230 are reverting back to 9005 except under one of the settings. What does updating VO mean and how do I update VO?
|
Appreciate
1
Tuukka1.50 |
Post Reply |
Bookmarks |
|
|