Help... Headlight Washer Covers - Flats or Rounds

[Joshman73]

Trying to figure out what the deal is with the two different style headlight washer covers listed for e90 m3's. Do they both fit?

After searching through my vin (2011 E90 M3) it comes up with the elliptical style that sticks up, but the holes in my bumper are rhombus style.

ECS have both listed here
https://www.ecstuning.com/BMW-E90-M3...ht_washer_cap/

Any help would be appreciated.

[Atomicteal_M3]

Originally Posted by Joshman73

Trying to figure out what the deal is with the two different style headlight washer covers listed for e90 m3's. Do they both fit?

After searching through my vin (2011 E90 M3) it comes up with the elliptical style that sticks up, but the holes in my bumper are rhombus style.

ECS have both listed here
https://www.ecstuning.com/BMW-E90-M3...ht_washer_cap/

Any help would be appreciated.

The first two listed are specifically for the E9x M3. The bottom two (square-shaped) are for the non-M 3 series. Here's is a pic below of my front bumper headlight washer on a E90 M3.

[DavidZ]

Originally Posted by Joshman73

Trying to figure out what the deal is with the two different style headlight washer covers listed for e90 m3's. Do they both fit?

After searching through my vin (2011 E90 M3) it comes up with the elliptical style that sticks up, but the holes in my bumper are rhombus style.

ECS have both listed here
https://www.ecstuning.com/BMW-E90-M3...ht_washer_cap/

Any help would be appreciated.

I replaced both of mine last year. I don't quite remember the shape of the hole with the covers removed, but 99% sure they aren't rhombus shaped. The left and right sides of the hole are definitely parallel to each other, as you can see from the clips: