▀▄ eas | Recaro Seats with Macht Schnell Mounting Hardware *Packages Available!*

[EAS]

As your authorized US Recaro dealer, we are proud to be able to offer you some unique packages, specific to BMW's, full warranty and fresh inventory. As you may know, Recaro is widely used as a high end option OEM application by many car manufacturers such as:

BMW, Audi, Mercedes Benz, Porsche, Saleen, Lotus, Volkswagen, Mitsubishi, Ford, Honda, Ferrari, Alfa Romero, and Aston Martin to name a few.

Here are a few facts about Recaro:

-Designed by Orthopedic doctors
-2 year warranty on materials/labor
-Insured by BMW/Recaro (TUV) $5mil liability
-Recaro's sit slightly lower than stock seats to allow for helmet clearance, and a lower center of gravity
-Huge weight savings over stock seats- 40lbs savings per seat when using Pole Positions

We offer a wide assortment of Recaro seats, and stock many of them in our facility, along with all the mounting hardware needed for your BMW. Also, we carry full mounting solutions for your BMW for your Recaro seats:



A quick glance of many different Recaros we carry:





What will you need to have these mounted in your vehicle? Two sets of floor mounts, a seat belt receptacle for each seat or racing harness tabs, an OC3 module to disable the passenger air bag, and get rid of error messages, and Recaro sliders and side mounts for each seat (not needed for Sportster seats)


Macht Schnell – Seat Shell Adapter/Side Mount for Recaro Seats, Clear Anodize, Aluminum


Macht Schnell – Seat Shell Adapter/Side Mount for Recaro Seats, Black Anodize, Aluminum


Macht Schnell – Seat Shell Adapter/Side Mount for Recaro Seats, Black Powdercoat, Steel


Macht Schnell – 6-point Harness Submarine Bracket, Steel


Macht Schnell – Harness Receptacles for Competition Liteweight Floor Mounts, Clip-In


Macht Schnell – Harness Receptacles for Competition Liteweight Floor Mounts, Bolt-In


Macht Schnell – Seatbelt Receptacles for Competition Liteweight Floor Mounts, Sedan


Macht Schnell – Seatbelt Receptacles for Competition Liteweight Floor Mounts, Coupe Right


Macht Schnell – Seatbelt Receptacles for Competition Liteweight Floor Mounts, Coupe Left


Macht Schnell - e8x/e9x Competition Liteweight Floor Mounts for Racing Seats - Black Anodized


Macht Schnell - e8x/e9x Competition Liteweight Floor Mounts for Racing Seats - Clear Anodized


Macht Schnell - e36/e46 Competition Liteweight Floor Mounts for Racing Seats - Black Anodized


Macht Schnell - e36/e46 Competition Liteweight Floor Mounts for Racing Seats - Clear Anodized


Macht Schnell - OC3 Seat Occupancy Sensor Emulation Module


RECARO - Slider Track Kit, inside bar without tabs


More information can be found in the track/racing section of our website.

Ordering:
Phone:
You can reach us directly by calling 866.669.0705 to place your order over the phone.

Payment:
Credit/Debit Cards: Visa, Mastercard, Discover, PayPal, Google Checkout (available online & over phone)

Other Payments:
Money Order/Cashier’s Check & Bank Wire Transfer are also available. Please contact us to pay with either of these methods.

Tax:
All CA customers will be charged 7.75% CA Sales tax.

Shipping:
All orders will be shipping via UPS. If you are interested in shipping to Hawaii, Alaska, or internationally, please contact us directly, as you will be charged additional shipping fees.

Hours of Operations:
Monday - Friday from 9AM to 5PM PST
Saturday/Sunday - Closed

Retail Location/ Installation Center:
Come check out our 8000 square foot facility in Anaheim, CA. We install everything we sell.

Contact Info:
Phone: 866.669.0705 x27
Email: david@europeanautosource.com
Website: http://www.europeanautosource.com

Feel free to contact me via PM, email, or phone if you have any questions.

[LateBraking]

Originally Posted by tom @ eas

Alignment shims are also available for fine tuning the seating position for best steering wheel/seat alignment.

Any word on those "alignment shims" that Tom mentioned a while back? Also, how do those shims work? Curious if they work on hardware/etc that we already have, or if it's only compatible with Macht Schnell equipment.

[tom @ eas]

Originally Posted by LateBraking

Any word on those "alignment shims" that Tom mentioned a while back? Also, how do those shims work? Curious if they work on hardware/etc that we already have, or if it's only compatible with Macht Schnell equipment.

The alignment shim will allow one to fine-tune the seating position to best align you with the steering wheel.

Alignment shim kits are compatible with all Race shells, whether it is mounted with Recaro or MS hardware.

[LateBraking]

Originally Posted by tom @ eas

The alignment shim will allow one to fine-tune the seating position to best align you with the steering wheel.

Alignment shim kits are compatible with all Race shells, whether it is mounted with Recaro or MS hardware.

Thanks for the reply Tom. Is there a link that might show what these alignment shims look like/function? I'm pretty interested in picking up a few when I have time.

[shay2nak]

oh my damn. 80lbs savings for the pair!?

[tom @ eas]

Originally Posted by LateBraking

Thanks for the reply Tom. Is there a link that might show what these alignment shims look like/function? I'm pretty interested in picking up a few when I have time.

We'll be getting them up on the website shortly. In the meantime, feel free to drop by if you want to see them in person.

Originally Posted by shay2nak

oh my damn. 80lbs savings for the pair!?

Correct - it's a huge amount of weight reduction.

[lukester]

Did the install last weekend.
But to be honest. I'm not very very happy with the solution.
Many many parts which have to be aligned to get all bold through.
Why couldn't Macht Schnell not make a direct e92 set which doesn't require to add that many different parts to it.

With the old Macht Schnell floor mounts the harness receptacles could be connected directly to the side of the floor mounts.
With the new ones the harness receptacles add a lot of weight and high to the complete setup as they mount on top of the slider.
Don't really understand why both parts of the harness receptacles had to be made out of heavy steel. One side - for sure - it's the one which holds the harness. But the other one is just a spacer. This could be made out of alloy and would save 2-3 lbs per side.

At the moment I'm in contact with BMW here in Munich looking for a way if all missing airbags can be coded out as the Macht Schnell module is really not what I'm looking for as it completely disables the passenger airbag...?!

[EAS]

Thanks for the inquiries, all PMs have been replied!