Race Ramps 2-piece 56"

BPe90M3 · 08-21-2018, 12:59 PM

Anyone have any experience with these ramps? Plan to use them to put my exhaust on, and for oil changes, etc. Any clearance issues with the stock ZCP height?

rantarM3 · 08-21-2018, 01:39 PM

I have used a set on 2-piece Race Ramps with my E90 ZCP with no issues. They have been great. I did get a QuickJack now and will be selling my ramps (and some other stuff) soon.

I’ve used the ramps with a couple of other RaceRamps products (e.g., wheel cribs) to do all my maintenance.

brettcp · 08-21-2018, 01:59 PM

I use the single piece 56" race ramps with my 2012 E93 M3 - no clearance issues at all, even some clearance room to spare. Highly recommended - the quality is great.

roastbeef · 08-21-2018, 02:50 PM

I have them and they are great.

Honda · 08-21-2018, 05:22 PM

Quote:

Originally Posted by roastbeef

I have them and they are great.

would they work if car is lowered with 1" gap between tire and fender?

roastbeef · 08-22-2018, 05:29 AM

Quote:

Originally Posted by Honda

would they work if car is lowered with 1" gap between tire and fender?

probably. they only issue i run into is when i try to drive onto the ramps when they are in front... my gt4 lip hits them. if you're backing up, you should be fine.

brodiem · 08-22-2018, 06:27 AM

I have a non-ZCP E92 with Eibach Prokit and a GTS style lip with no clearance issues using the 56" ramps

Agent-GHQ · 08-23-2018, 11:31 PM

I have this RR-56 and my E92 Competition (EDC) is bone stock. Not sure how you guys go up without a tiny tiny rub but these RR-56 rubbed a tad bit on the bottom black part.

To be safe, I’d suggest getting the RR extender

HadesM3 · 08-27-2018, 07:58 AM

Will standard Rhino ramps work on a stock e90 zcp? I plan to change my oil DIY for the first time and have a set.

Thanks.

BPe90M3 · 08-27-2018, 07:59 AM

Quote:

Originally Posted by ZombieM3

Will standard Rhino ramps work on a stock e90 zcp? I plan to change my oil DIY for the first time and have a set.

Thanks.

Highly doubt it. Approach angle on them is way too steep.

dkexige · 08-31-2018, 11:09 AM

Quote:

Originally Posted by ZombieM3

Will standard Rhino ramps work on a stock e90 zcp? I plan to change my oil DIY for the first time and have a set.

Thanks.

I use the standard rhino ramps purchased from AAP. I don't have ZCP, and it's hard to judge while I'm in the car, but the 10mm difference in ride height shouldn't be a problem. I've driven forward and reversed onto them to do oil changes, change the skid plate, and do exhaust work. I've also just used them after raising the car on jacks, but that method obviously doesn't have clearance concerns.

Mumen Rider · 11-12-2021, 02:39 PM

Thread revival time. I'm looking at race ramps (wanted quickjack but not feasible at the moment), my e90 m3 will be lowered on eibachs. There's a 46, 56 and 67 set. What's the most common one used for our cars? I'd mainly use it for oil changes and occasionally just spray snow foam or Apc on the undercarriage and rinse it off.

08-21-2018, 12:59 PM	#1
BPe90M3 Captain 257 Rep 769 Posts Drives: 2011.75 AW e92 M3 Join Date: Oct 2011 Location: North Jersey iTrader: (2)	Race Ramps 2-piece 56" Anyone have any experience with these ramps? Plan to use them to put my exhaust on, and for oil changes, etc. Any clearance issues with the stock ZCP height?
	Appreciate 0 Tweet Quote

08-21-2018, 01:39 PM	#2
rantarM3 Captain 205 Rep 731 Posts Drives: E90 M3 Join Date: Aug 2011 Location: Florida iTrader: (3)	I have used a set on 2-piece Race Ramps with my E90 ZCP with no issues. They have been great. I did get a QuickJack now and will be selling my ramps (and some other stuff) soon. I’ve used the ramps with a couple of other RaceRamps products (e.g., wheel cribs) to do all my maintenance.
	Appreciate 0 Quote

08-21-2018, 01:59 PM	#3
brettcp Captain 348 Rep 705 Posts Drives: 2012 E93 M3 Join Date: Mar 2011 Location: So Cal iTrader: (2)	I use the single piece 56" race ramps with my 2012 E93 M3 - no clearance issues at all, even some clearance room to spare. Highly recommended - the quality is great.
	Appreciate 0 Quote

08-21-2018, 02:50 PM	#4
roastbeef Lieutenant General 11594 Rep 12,738 Posts Drives: E92 M3 Join Date: Nov 2010 Location: Orange County, CA iTrader: (4)	I have them and they are great. __________________ Instagram; @roastbeefmike
	Appreciate 0 Quote

08-22-2018, 06:27 AM	#7
brodiem Private 40 Rep 65 Posts Drives: 2009 BMW E92 M3 Join Date: Nov 2017 Location: CA iTrader: (1) Garage List 2009 BMW M3 [0.00]	I have a non-ZCP E92 with Eibach Prokit and a GTS style lip with no clearance issues using the 56" ramps
	Appreciate 0 Quote

08-23-2018, 11:31 PM	#8
Agent-GHQ Captain 110 Rep 837 Posts Drives: '13 AW ///M3 E92 MT Comp Pkg Join Date: Jul 2009 Location: San Diego, CA iTrader: (0)	I have this RR-56 and my E92 Competition (EDC) is bone stock. Not sure how you guys go up without a tiny tiny rub but these RR-56 rubbed a tad bit on the bottom black part. To be safe, I’d suggest getting the RR extender
	Appreciate 0 Quote

08-27-2018, 07:58 AM	#9
HadesM3 Private First Class 136 Rep 195 Posts Drives: Pair of e90's Join Date: May 2016 Location: CA iTrader: (0)	Will standard Rhino ramps work on a stock e90 zcp? I plan to change my oil DIY for the first time and have a set. Thanks.
	Appreciate 0 Quote

11-12-2021, 02:39 PM	#12
Mumen Rider New Member 2 Rep 21 Posts Drives: BMW E90 M3 Join Date: Oct 2021 Location: London iTrader: (0)	Thread revival time. I'm looking at race ramps (wanted quickjack but not feasible at the moment), my e90 m3 will be lowered on eibachs. There's a 46, 56 and 67 set. What's the most common one used for our cars? I'd mainly use it for oil changes and occasionally just spray snow foam or Apc on the undercarriage and rinse it off.
	Appreciate 0 Quote