2002 e46 M3 Black SMG VF SuperCharged 502 RWHP

[pish180]

BIMMERPOST / Classifieds

Asking Price:

Sold

Item Interest

After buying a car that is friendlier for a larger family (4 door), I need to sell my beloved e46 M3. I have put in probably $40-$50k in mods and maintenance into the car and it is running amazing!

I will try to list all the large ticket items I've done but I'm sure I'll forget some. Please ask if there are any questions and/or if you are interested in buying the car. The car runs and drives great! I’ve made several long-distance trips (>6 hours) with this car and never was concerned about its reliability. The Supercharger is very nice to drive as the power is very linear and pulls the entire powerband, no surprise jump in power like the Turbo kits. The VF kit also makes driving in hot weather better considering it is water-cooled. The car is garage kept and almost exclusively driven in the summer months. Oil changes were done every 3k miles with Castrol TWS 0w-60 and BMW oil filters. I've not driven the car much in the past 2 years because of the new additions to the family but I do need to sell the car.

Price: Asking 18.5k OBO. (Reduced from 21k)


History:
-------------
I bought the car over 9 years ago used with around 128k miles on it. From there I have done an extensive number of mods and maintenance to ensure the car runs forever. Throughout the year's things have gone bad as with any car. I have replaced everything OE or Greater materials when doing maintenance. The car runs amazing and I hate to let this car go but I don’t have room for 4 cars.


Stats:
--------
169k Miles
502 RWHP (Dyno)
Trans has around 70-80k Miles
SMG Pump has around 10-15k Miles
VF570 Kit + Custom Tune 20-35k Miles
AquaMist Direct Meth Injection Kit 15-30k Miles


Mods and Maintenance:
--------------------------------
VF Engineering VF570 Supercharger kit (included Injectors, Plugs, etc) – 2013
Custom Tune – Frank Smith in MD
Methanol Injection (AquaMist) – Direct Port Injection kit.
SMG ECU Flash from ESS - 2013
Dynavin D99 Head unit with Steering controls and OBC integration
Valve Cover Gasket - 2018
Yaw Sensor - 2018
Final Stage Resistor - 2015
Rear Subframe Plates Welded + Rust Prevent Painting - 2017
Transmission (Had 60k Miles with Flywheel) - 2017
Transmission Springs - 2017
SMG Pump (Brand New) - 2017
Vanos seals - 2015
AGM Battery - 2017
Valve Adjustment and compression check - 2015
Headers (before I bought the car) - > 2010
Oxygen Sensors and Header Gaskets - 2014
Borla Exhaust System - 2009
Rear Backup Camera with IR for Night time - 2017
Clear Bra - 2010
LED corner lights, LED tail lights - 2012
Projector Fog lights - 2013
Rims and Tires (Silver Rims w/Lip) 19 x 245 and 275s – 2017
D12 Racing Suspension – 2013
Angel Eyes (before I bought the car) - >2010
Window Tint – 2016
ZCP Brake Kit upgrade with SS Lines – 2015
Polyurethane Subframe bushings and Trailing Arm Bushings – 2017 and 2013
Alternator – 2015
Power Steering Pump– 2016
High Flow Fuel Pump (with Super Charger Kit) – 2014
Rear Main Seal – 2017
Stage 2 Clutch – 2017
GIUBO (driveshaft Flex Disc) – 2017
M5 SMG Shift Knob – 2014
Carbon Fiber wrapped Interior Trim – 2012
LED Interior Lights
All-Weather Mats
Aluminum Paddle Shifters
Mikey Mouse Gauge Pods (Boost and Meth Gauge)
Starter – 2015
Oil Level/Temp Sensor - 2016
Carbon Fiber Front Splitters – 2013



Car Comes with:
-----------------------
Several stock parts (airbox and other parts)
SuperCharger Oil and Extra Airfilter
Car Cover
Lots of paperwork/Records of maintenance/mods.
Battery Tender Jr with quick detach


Extra and/or Optional cost:
-------------------------
Extra set of Rims and Tires – Black ZCP replicas 245 and 275s



DISCLAIMERS:
--------------------
The car is running catless.

Prefer to meet somewhere in Northern VA.

[pish180]

Attached Images - The Car

[pish180]

Bump

[Hollywood Hogan]

pmed

[pish180]

Bump

[Soden82]

Rod bearing service performed? Any subframe issues?

[Boostin FD]

Really nice looking e46 M. Good luck!

[CobraDriver]

I'd like to talk to you about this car but the AIM is the only way to get you and that's not working.

my email cobradriver@gmail.com

Thanks

[pish180]

Hey cobra. I'll send you a message today.

[pish180]

Originally Posted by Soden82

Rod bearing service performed? Any subframe issues?

Hey bud, honestly the bearings may have been done before I bought the car. I've checked my VIN and it doesn't say I'm delinquent on that. I bought the car with around 120k about 10 year ago. I've been religious on the oil changes at 3k with filters. I've never seen any kind of metallic flakes, cloudly oily or anything that would show signs of failing bearings, so I'm not even remotely concerned.

Yeah subframe was done with plates. It should be in the description.

Hope that helps!

[pish180]

Originally Posted by CobraDriver

I'd like to talk to you about this car but the AIM is the only way to get you and that's not working.

my email cobradriver@gmail.com

Thanks

Sent

[Ubersmooth]

PM'd ya

[pish180]

Bump

[Mrbyers1]

Is this still available and where are you located

[pish180]

bump.

[pish180]

Bump

[Boostin FD]

I can't believe this thing is still for sale. What kind of exhaust is on it? I see you mentioned it runs catless (which means headers are aftermarket) but what about the rest?

[DrFerry]

[pish180]

Originally Posted by Boostin FD

I can't believe this thing is still for sale. What kind of exhaust is on it? I see you mentioned it runs catless (which means headers are aftermarket) but what about the rest?

I have a somewhat pending offer. We shall see in the meantime. Bump.

It's catless and it is running a Borla exhaust. Also thanks for bringing that up, I don't have it in the description! Totally forgot about it, since it was one of my first mods (stock was way too raspy for me).

[pish180]

Sold, Thanks all for the interest!