Brey Krause seat hardware + OEM tracks

[///M3 Gusta]

BIMMERPOST / Classifieds

Asking Price:

Sold

Item Interest

Good Evening-

I'm putting up my BK seat hardware: I have a set of R-9280 side adapters, R-9258 anti-sub mount, and R-9288/9289 harness mounting point for each side of the car.

Additionally, I have an extra pair of seat rails, a E30 power window switch, and a custom made wiring harness that is plug and play to the factory vehicle harness. With these you don't have to worry about ever taking apart your stock seats or hacking your wiring- just bolt them in and go. I still have these in the car but will grab some more pics once removed (A few of what I have mounted in the pass side are attached). I have over $1,200 in this, among the BK hardware, the power window switches, and scouring junkyards for power seat rails and wiring. I would like to get $450 per side obo. Willing to ship or meet reasonable distance from Pittsburgh PA.

Thanks!

[MinionM3]

Do these lower the driving position similar to other set ups? I'm a tall guy and have trouble fitting with a helmet on in most cases.

[///M3 Gusta]

They can, but nothing is going to get it as low as a direct-to-floor mount. I had a set of VAC hardware with Sparco sliders before this, and that seemed to be as low as this configuration. Hard to answer definitively due to variables in setups.

[MinionM3]

Originally Posted by ///M3 Gusta

They can, but nothing is going to get it as low as a direct-to-floor mount. I had a set of VAC hardware with Sparco sliders before this, and that seemed to be as low as this configuration. Hard to answer definitively due to variables in setups.

PM'd

[///M3 Gusta]

Sale Pending

[MILLER335I]

How much weight did it add? Can you still get the harnesses made?