F/S E90/2 M3 Eibach Pro Kit with Shaved Top Mounts & E36 M3 Bump Stops

[Len_Beach]

I have a set of Eibach Pro Springs; model number E10-20-014-17-22 to fit the E90 & E92 M3.

These come complete with E36 M3 Bump Stops & Shaved Top Mounts to retain suspension travel and therefore ride quality.

The Shaved top mounts have had 8mm removed and the E36 M3 Bump Stops are around 15mm shorter than stock. Combined this give approximately an extra 20mm of suspension travel which negates the drop of the Eibachs to retain near stock ride comfort.

These work with both EDC & non-EDC cars but are crucial on EDC cars to ensure that the shocks aren't damaged.

The kit has been on my car for around 10,000 so are in very good condition.

To buy this lot new; Eibachs would be around £165 delivered and the mounts, modification and bump stops would be around £235 so around £400 in total. I'm looking for £295 delivered.

[sinth]

bump for a genuine guy.

Thanks for the interior trims. Gloss black is soo much nicer than piano

[Len_Beach]

Originally Posted by sinth

bump for a genuine guy.

Thanks for the interior trims. Gloss black is soo much nicer than piano

Thanks Buddy

Glad you like them

[Len_Beach]

Sold

[Jsantos]

Bumping this old thread. Do you have to really shave off the top mounts?

Can you just go with the e36 m3 bump stops and install the spring?

I would appreciate the input.

[Len_Beach]

The shaving of the mounts gives back the full suspension travel which is approximately 9mm from memory.

The ride was better than stock when I ran this setup.

[Ctebbs5]

How do you shave these and how much is to be taken off?