BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > DIY Guides/ Discussions
 
European Auto Source (EAS)
Post Reply
 
Thread Tools Search this Thread
      11-01-2008, 10:35 PM   #1
rzm3
Moderator
rzm3's Avatar
670
Rep
4,737
Posts

Drives: E92 M3
Join Date: Aug 2007
Location: USA

iTrader: (18)

Arrow DIY: Aftermarket Spring Install

The process is very similar (with some simplifications) to regular 3 Series' install: http://www.e90post.com/forums/showthread.php?t=15397

All the bolts and nuts that need to be removed are circled in red. BMW recommends replacing all nuts and bolts.

Torque specs: http://www.m3post.com/forums/showthread.php?t=183005

I've done this so many times since when this thread was written. Now updated for 2010

Best Practices:

Front Axle:
1. When removing the front springs: use a jack and push up the front suspension to compress the spring, and then put on the spring compressor. This will save you a lot of time.
2. The strut piston rod can be pushed into the shock with hands.

Rear Axle:
1. When loosening the bolts: loosen the shock bolt first, the camber arm/wheel carrier bolt second.
2. When tightening the bolts: tighten the camber arm/wheel carrier bolt first, the shock bolt second.
3. It may be very tough to align the wheel carrier with the camber arm. Try jacking up the camber arm, and use a wrench as a level to position the parts.
4. When aligned correctly, you should be able to push the outer bolt completely through the camber arm, without any turning. This bolt is tightened by the nut.
Attached Images
       

Last edited by rzm3; 01-03-2010 at 04:24 PM..
Appreciate 1
nyfg56100.00
      11-01-2008, 11:05 PM   #2
BMWguy206
Private First Class
BMWguy206's Avatar
United_States
11
Rep
140
Posts

Drives: '93 400E
Join Date: Apr 2007
Location: Los Angeles, CA

iTrader: (0)

So you removed and replace the spring without removing the entire front strut assembly?
__________________
'95 M3 Coupe Alpine White
Appreciate 0
      11-01-2008, 11:09 PM   #3
rzm3
Moderator
rzm3's Avatar
670
Rep
4,737
Posts

Drives: E92 M3
Join Date: Aug 2007
Location: USA

iTrader: (18)

Yup, as said, all bolts needed to be removed are circled.
Appreciate 0
      11-06-2008, 08:50 PM   #4
camaross305
camaross305's Avatar
135
Rep
1,825
Posts

Drives: 2008 M3
Join Date: Jul 2008
Location: gainesville fl

iTrader: (20)

cool nice write up
Appreciate 0
      11-06-2008, 08:55 PM   #5
MDCTFTW
Lieutenant Colonel
123
Rep
1,973
Posts

Drives: E92 DCT
Join Date: Apr 2008
Location: Norcal

iTrader: (0)

SWEET! Any shots of the rear install? I know it's probably exactly the same as a normal 3 series.
__________________


MDCT ... so you can drive and eat a hamburger at the same time.
Appreciate 0
      11-06-2008, 09:12 PM   #6
rzm3
Moderator
rzm3's Avatar
670
Rep
4,737
Posts

Drives: E92 M3
Join Date: Aug 2007
Location: USA

iTrader: (18)

Quote:
Originally Posted by MDCTFTW View Post
SWEET! Any shots of the rear install? I know it's probably exactly the same as a normal 3 series.
dude... you gotta a little better. The first picture is the rear install.
Appreciate 0
      11-06-2008, 10:23 PM   #7
MDCTFTW
Lieutenant Colonel
123
Rep
1,973
Posts

Drives: E92 DCT
Join Date: Apr 2008
Location: Norcal

iTrader: (0)

Quote:
Originally Posted by rzm3 View Post
dude... you gotta a little better. The first picture is the rear install.
Holy shit, I fail. My bad! Thanks again for the specs and pics. Time to order my springs.
__________________


MDCT ... so you can drive and eat a hamburger at the same time.
Appreciate 0
      12-19-2008, 05:14 PM   #8
PunjabiM3
Colonel
PunjabiM3's Avatar
United_States
249
Rep
2,084
Posts

Drives: M5 CS
Join Date: Mar 2008
Location: Flower Mound, TX

iTrader: (1)

How difficult was it using the spring compressor? I have done tons of coil-over installs before on my various cars including two e46 M3's, but have never installed drop springs. I recently ordered some H&R springs and plan on doing the install myself. Am a little worried about using the spring compressor in fear that it will slip or fail and the spring will shoot out and hurt someone, the car, or something else. Is it straight forward using the compressor and is it pretty sturdy? Would love some input on this. TIA.
__________________
2012 Audi R8 V10TT| 6MT| Suzuka Grey
2015 Ferrari 458 Speciale| Rosso Scuderia
2020 BMW X7| Mineral White
2022 992 GTS| 7MT | Shark Blue
Appreciate 0
      12-19-2008, 07:17 PM   #9
camaross305
camaross305's Avatar
135
Rep
1,825
Posts

Drives: 2008 M3
Join Date: Jul 2008
Location: gainesville fl

iTrader: (20)

Quote:
Originally Posted by PunjabiM3 View Post
How difficult was it using the spring compressor? I have done tons of coil-over installs before on my various cars including two e46 M3's, but have never installed drop springs. I recently ordered some H&R springs and plan on doing the install myself. Am a little worried about using the spring compressor in fear that it will slip or fail and the spring will shoot out and hurt someone, the car, or something else. Is it straight forward using the compressor and is it pretty sturdy? Would love some input on this. TIA.
They are extremely sturdy. They have little safety pins to push to keep the springs from popping out. It really easy and straight forward.
__________________
The original Hid angel eyes for sale now on ebay

User name lmims526894rou

Or contact me at chrism9551@aol.com
Appreciate 0
      12-19-2008, 09:59 PM   #10
PunjabiM3
Colonel
PunjabiM3's Avatar
United_States
249
Rep
2,084
Posts

Drives: M5 CS
Join Date: Mar 2008
Location: Flower Mound, TX

iTrader: (1)

Quote:
Originally Posted by camaross305 View Post
They are extremely sturdy. They have little safety pins to push to keep the springs from popping out. It really easy and straight forward.
Cool thanks. Is one of these designs better than the other:
http://shop.oreillyauto.com/ProductD...egoryCode=3492

http://www.sears.com/shc/s/p_10153_1...0070515x00001c
__________________
2012 Audi R8 V10TT| 6MT| Suzuka Grey
2015 Ferrari 458 Speciale| Rosso Scuderia
2020 BMW X7| Mineral White
2022 992 GTS| 7MT | Shark Blue
Appreciate 0
      12-20-2008, 11:01 AM   #11
rzm3
Moderator
rzm3's Avatar
670
Rep
4,737
Posts

Drives: E92 M3
Join Date: Aug 2007
Location: USA

iTrader: (18)

FYI you can rent spring compressors for free at autozone.
Appreciate 0
      12-20-2008, 03:26 PM   #12
PunjabiM3
Colonel
PunjabiM3's Avatar
United_States
249
Rep
2,084
Posts

Drives: M5 CS
Join Date: Mar 2008
Location: Flower Mound, TX

iTrader: (1)

Quote:
Originally Posted by rzm3 View Post
FYI you can rent spring compressors for free at autozone.
That's good to know!
__________________
2012 Audi R8 V10TT| 6MT| Suzuka Grey
2015 Ferrari 458 Speciale| Rosso Scuderia
2020 BMW X7| Mineral White
2022 992 GTS| 7MT | Shark Blue
Appreciate 0
      12-21-2008, 02:14 PM   #13
doba_s
Major General
doba_s's Avatar
United_States
405
Rep
6,107
Posts

Drives: X7 l Cayenne l 997.2RS
Join Date: Sep 2006
Location: Danville

iTrader: (26)

Quote:
Originally Posted by rzm3 View Post
FYI you can rent spring compressors for free at autozone.
i didnt know that ... $6/day at kragen
Appreciate 0
      12-22-2008, 03:09 AM   #14
camaross305
camaross305's Avatar
135
Rep
1,825
Posts

Drives: 2008 M3
Join Date: Jul 2008
Location: gainesville fl

iTrader: (20)

Quote:
Originally Posted by rzm3 View Post
FYI you can rent spring compressors for free at autozone.
yep thats where i always get them from or advanced
__________________
The original Hid angel eyes for sale now on ebay

User name lmims526894rou

Or contact me at chrism9551@aol.com
Appreciate 0
      02-18-2009, 12:56 PM   #15
schnell325
Bored at work....
schnell325's Avatar
Canada
887
Rep
5,378
Posts

Drives: 2016 F82 M4 GTS//2022 M235iGC
Join Date: Aug 2007
Location: Comox Valley

iTrader: (8)

Bump so I can find this thread in the spring too.
__________________
Grey Matter:2008 E92 M3:608/425. SG/PS SOLD!
Dark Matter:2015 F80 M3:495/505. SOLD!
Anti Matter :2016 F82 M4 GTS
What next?!? A 2022 M235i GC- I must be getting old
Appreciate 0
      02-18-2009, 01:48 PM   #16
TonyTone
Major
TonyTone's Avatar
United_States
200
Rep
1,293
Posts

Drives: M3 VERT
Join Date: Jan 2008
Location: FL

iTrader: (0)

Great rightup!
Appreciate 0
      02-19-2009, 07:44 PM   #17
MrAdams
do a wheelie!!!
MrAdams's Avatar
Mexico
154
Rep
929
Posts

Drives: E46 M3 - '72 2002 - '65 Impala
Join Date: Oct 2008
Location: Los Angeles

iTrader: (1)

Garage List
how long did it take?
__________________
~Adam
Appreciate 0
      02-19-2009, 10:00 PM   #18
GregW / Oregon
Commander-In-Chief
2067
Rep
8,898
Posts

Drives: 2023 M2 Coupe, 2020 GLE 450
Join Date: Nov 2005
Location: Lake Oswego, OR

iTrader: (3)

Garage List
Quote:
Originally Posted by 1989baby View Post
how long did it take?
__________________

Greg Lake Oswego, Oregon, USA
2023 M2 Coupe - Brooklyn Grey/Cognac/CF, 6MT; 2020 MB GLE 450
Appreciate 0
      02-20-2009, 11:48 AM   #19
MrAdams
do a wheelie!!!
MrAdams's Avatar
Mexico
154
Rep
929
Posts

Drives: E46 M3 - '72 2002 - '65 Impala
Join Date: Oct 2008
Location: Los Angeles

iTrader: (1)

Garage List
Quote:
Originally Posted by GregW / Oregon View Post
my bad, just trippin cause I'm doing mine tomorrow!
__________________
~Adam
Appreciate 0
      02-23-2009, 11:55 AM   #20
MrAdams
do a wheelie!!!
MrAdams's Avatar
Mexico
154
Rep
929
Posts

Drives: E46 M3 - '72 2002 - '65 Impala
Join Date: Oct 2008
Location: Los Angeles

iTrader: (1)

Garage List
DID IT!!! took me and a friend about 2.5 hours. It was super easy. we had planned a 6 hour install like the thread said. Thanks rzm3 for the DIY helped out a lot. and thnks for all the torque specs too looks great now
__________________
~Adam
Appreciate 0
      02-23-2009, 01:41 PM   #21
JuniorDee
Captain
JuniorDee's Avatar
73
Rep
610
Posts

Drives: the speed limit
Join Date: Apr 2007
Location: the land of brat and brotchen

iTrader: (1)

if an alignment is not done, what kind of tire wear would we see?
__________________
EDC.....viagra for your car
Appreciate 0
      02-23-2009, 03:19 PM   #22
schnell325
Bored at work....
schnell325's Avatar
Canada
887
Rep
5,378
Posts

Drives: 2016 F82 M4 GTS//2022 M235iGC
Join Date: Aug 2007
Location: Comox Valley

iTrader: (8)

Quote:
Originally Posted by 1989baby View Post
DID IT!!! took me and a friend about 2.5 hours. It was super easy. we had planned a 6 hour install like the thread said. Thanks rzm3 for the DIY helped out a lot. and thnks for all the torque specs too looks great now

Nice to hear!!
__________________
Grey Matter:2008 E92 M3:608/425. SG/PS SOLD!
Dark Matter:2015 F80 M3:495/505. SOLD!
Anti Matter :2016 F82 M4 GTS
What next?!? A 2022 M235i GC- I must be getting old
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:10 AM.




m3post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST