AutoTalent | BE Bearings + ARP Rod Bolts + Fluids + Install in SoCal $2350

[AutoTalent]

S65 Rod Bearing Services:

We are the source for BE Bearings, nobody has more experience with BE Bearings than Auto Talent!

Features:
- BE Bearings
- Lower Friction
- Harder and More Durable
- Superior Oil Lubrication

Services Performed (Turn over time 12 hours)
- Engine + Suspension inspection
- Inspect/Replace BE Rod Bearings
- Install Upgraded Connecting Rod Bolts
- Inspect Rod Journals
- Inspect Oil Pump nuts
- Inspect Clean/Flush Oil Pan for debris
- Collect Oil Sample for Analysis
- Engine Mount Replacement

Items Included
- BE Bearings - Retail $595
- ARP Connecting Rod Bolts - Retail $295
- OEM BMW Oil Pan Gasket - Retail $39
- Oil Change & Filter Change (WITH OEM Parts) - Retail $225
- Blackstone Oil Report - Retail $28

> Total Price $1,216
> 12 hours of labor $1,560
> Total after install and tax $2891.52
> AutoTalent Price $2350

> Optional add on: - OEM Engine Mounts - Retail $260
> AutoTalent Price BE Bearing Special W/ Engine Mounts $2450


Optional Services
- Replace Spark Plugs:
> P#LKR8AP - Retail $30.83 per plug ($246.64) + installation $200: Total $446.64
> Auto Talent Price $325
> SAVINGS! $121.64

Background: BMW M5 (2005-2010), BMW M3 (2008-2013) can suffer early bearing failure due to inadequate rod bearing clearance. Insufficient clearance means insufficient oil flow, excessive bearing surface heat, and premature wear. These symptoms can lead to early bearing failure and a very expensive engine rebuild. Problem can be addressed during engine rebuild, but it's expensive. Some people switched to thinner oils -- as a stopgap measure. Other stopgap measures include anti-friction teflon coated factory bearings, WPC anti-friction treated factory bearings, and custom bearings with same clearance as stock. WPC treated bearings slightly increase clearance, but are a stopgap. Newer factory bearings (2010.5 and later) are made from tin-aluminum, not lead-copper. Tin-aluminum bearings are 4-times harder on the surface than lead-copper bearings. This extra hardness shows signs of doing more damage to motors as there seems to be more bearing failures with 2010.5 and later vehicles. Tin-aluminum bearings also don't show the same signs of premature wear in Blackstone oil analysis due to lack of lead and copper. We are the guys who came up with the WPC treated bearings and we realized a better solution was needed. The Better Solution: Designed to address and fix the rod bearing clearance issue. Designed for use with factory 10W60 weight oils. Increases oil flow. Improves lubrication for "Start-Stop" vehicles over factory bearings. Designed in consultation with leading industry experts from NASCAR, Indy Car, and former BMW M-Division engine designer. Designed and manufactured by Clevite, factory BMW bearing supplier. Traditional lead-copper bearing design; less wear on crankshaft journals, traceable with Blackstone oil analysis. Each bearing is measured and size-binned. Allows for custom bearing selection when necessary.

We have lots of technical information at our web site and wiki...with more on the way.

See also:

• Main Web site: http://bebearings.com
• BE Bearings Wiki: http://wiki-diy.com
  • S65/S85 Engine specifications
  • Bearing specifications
  • Rod bolt specifications, torques, bore distoration details
  • And more...

[kchu221]

do you guys finance...?

[AutoTalent]

Originally Posted by kchu221

do you guys finance...?

For you?


























No.

[AutoTalent]

Bump!

[AutoTalent]

Bump!

[AutoTalent]

Bump!

[AutoTalent]

Don't let your bearings look like this!

PM or Email us today!

[AutoTalent]

Bump!

[AutoTalent]

Bump! We will have more bearings in about 2 weeks!

[AutoTalent]

Bump!

[AutoTalent]

We have bearings in stock

[Dan@AutoTalent]

Bump!

[IMG]

Great deal

[cplagz]

Are you able to provide bearings+be arps shipped to Australia? BE's own ZenCart wants to charge me $150usd shipping :\

[AutoTalent]

Originally Posted by cplagz

Are you able to provide bearings+be arps shipped to Australia? BE's own ZenCart wants to charge me $150usd shipping :\

PM Sent

[AutoTalent]

Bump! Appointment times filling up! Get your bearings before they go back out of stock!

[Dan@AutoTalent]

Bump, make your appointment now!

[AutoTalent]

Bump, taking deposits for the next incoming batch of bearings and bolts! ETA first week of April! Auto Talent is the FIRST to get BE Bearings, PM or email to schedule!

[AutoTalent]

E92 M3 from Hawaii getting the works! ESS 625 Supercharger, Spec Stage 3 Clutch, Rod Bearings + Engine Mounts: