Replacement rotors from Brembo GT kits??

Dieselino · 07-15-2011, 08:26 PM

Anyone know where to get these and how much they are aswell as pads? Also anyone know if just the rings can be replaced and reuse the hats?

wwjd15 · 07-15-2011, 08:31 PM

Brembo sells them. They were selling for $500 range for a piece a couple of years ago.

Checkcaptain · 07-16-2011, 01:10 AM

I have 4 brand new drilled rotors - 2 fronts 380x34 and 2 rears 380x28

Dieselino · 07-16-2011, 07:02 AM

Brembo rotors? how much?

bigjae1976 · 07-17-2011, 05:58 PM

I think discs usually run in the $400 per disc depending on size and options. I think Turner sells them.

HP Autosport · 07-17-2011, 09:04 PM

Quote:

Originally Posted by Dieselino

Anyone know where to get these and how much they are aswell as pads? Also anyone know if just the rings can be replaced and reuse the hats?

You can also use replacement 380x32 Aero Rings from Stoptech for $280 each front and $290 for the 380x35, which is a good savings from the Brembo rings. Hats are always reused unless found cracked. You have a wide range of replacement pads from low $100s to high 200s for street pads.

ring007 · 07-20-2011, 09:27 AM

I'm interested in the 380x34 front set. How much shipped to 50323?
Thanks.

Quote:

Originally Posted by Checkcaptain

I have 4 brand new drilled rotors - 2 fronts 380x34 and 2 rears 380x28

Checkcaptain · 07-23-2011, 04:48 AM

Quote:

Originally Posted by ring007

I'm interested in the 380x34 front set. How much shipped to 50323?
Thanks.

Sorry, I only will sell front and rear together - also they are completely with pots and brandnew:

http://imageshack.us/g/841/p1000153q.jpg/

enricob · 07-24-2011, 03:55 PM

Quote:

Originally Posted by Checkcaptain

Sorry, I only will sell front and rear together - also they are completely with pots and brandnew:

http://imageshack.us/g/841/p1000153q.jpg/

could you pm me price??

Checkcaptain · 07-26-2011, 04:53 AM

Quote:

Originally Posted by enricob

could you pm me price??

Sorry, I have no PM rights - just send me a mail to:

info@krenzer-performance-parts.com

nholmes · 11-17-2015, 01:44 PM

Necro bump!

I'm having a really hard time finding sites that sell replacement rotors for the rear in 380x28mm.

The Brembo part numbers are 09.A186.13/23 (drilled/slotted) but googling those part numbers are almost always a dead end.

Anyone have a site/shop they get their rotors from?

m3aviator · 11-18-2015, 07:17 PM

Quote:

Originally Posted by Checkcaptain

Sorry, I have no PM rights - just send me a mail to:

info@krenzer-performance-parts.com

Ralf,
All the amazing parts you get your hands on and they won't let you PM on the forum. Wow.

Timujin · 02-20-2019, 03:34 AM

Quote:

Originally Posted by HP Autosport

Quote:

Originally Posted by Dieselino

Anyone know where to get these and how much they are aswell as pads? Also anyone know if just the rings can be replaced and reuse the hats?

You can also use replacement 380x32 Aero Rings from Stoptech for $280 each front and $290 for the 380x35, which is a good savings from the Brembo rings. Hats are always reused unless found cracked. You have a wide range of replacement pads from low $100s to high 200s for street pads.

Quote:

Originally Posted by HP Autosport

Quote:

Originally Posted by Dieselino

Anyone know where to get these and how much they are aswell as pads? Also anyone know if just the rings can be replaced and reuse the hats?

You can also use replacement 380x32 Aero Rings from Stoptech for $280 each front and $290 for the 380x35, which is a good savings from the Brembo rings. Hats are always reused unless found cracked. You have a wide range of replacement pads from low $100s to high 200s for street pads.

Is this still being done?

StripclubDJ · 02-20-2019, 07:53 AM

Quote:

Originally Posted by Timujin

Quote:

Originally Posted by HP Autosport

Quote:

Originally Posted by Dieselino

Anyone know where to get these and how much they are aswell as pads? Also anyone know if just the rings can be replaced and reuse the hats?

You can also use replacement 380x32 Aero Rings from Stoptech for $280 each front and $290 for the 380x35, which is a good savings from the Brembo rings. Hats are always reused unless found cracked. You have a wide range of replacement pads from low $100s to high 200s for street pads.

Quote:

Originally Posted by HP Autosport

Quote:

Originally Posted by Dieselino

Anyone know where to get these and how much they are aswell as pads? Also anyone know if just the rings can be replaced and reuse the hats?

You can also use replacement 380x32 Aero Rings from Stoptech for $280 each front and $290 for the 380x35, which is a good savings from the Brembo rings. Hats are always reused unless found cracked. You have a wide range of replacement pads from low $100s to high 200s for street pads.

Is this still being done?

This will not work on brembo kits with the H-bobbin front hat setup

If you hat hardware looks these these don't even try it, stoptechs don't fit
You'll be sucking up and paying around 1500 for new front rotors and full hardware

Timujin · 02-20-2019, 08:25 AM

That looks like my hardware. Thank you.

slonik · 02-20-2019, 06:58 PM

only 380x32, 355x32, 345x28, 332x32, 328x28 (brembo d-bobbins/stoptech t-bobbins) interchangable.

Timujin · 02-20-2019, 07:40 PM

Quote:

Originally Posted by StripclubDJ

Quote:

Originally Posted by Timujin

Quote:

Originally Posted by HP Autosport

Quote:

Originally Posted by Dieselino

Anyone know where to get these and how much they are aswell as pads? Also anyone know if just the rings can be replaced and reuse the hats?

You can also use replacement 380x32 Aero Rings from Stoptech for $280 each front and $290 for the 380x35, which is a good savings from the Brembo rings. Hats are always reused unless found cracked. You have a wide range of replacement pads from low $100s to high 200s for street pads.

Quote:

Originally Posted by HP Autosport

Quote:

Originally Posted by Dieselino

Anyone know where to get these and how much they are aswell as pads? Also anyone know if just the rings can be replaced and reuse the hats?

You can also use replacement 380x32 Aero Rings from Stoptech for $280 each front and $290 for the 380x35, which is a good savings from the Brembo rings. Hats are always reused unless found cracked. You have a wide range of replacement pads from low $100s to high 200s for street pads.

Is this still being done?

This will not work on brembo kits with the H-bobbin front hat setup

If you hat hardware looks these these don't even try it, stoptechs don't fit
You'll be sucking up and paying around 1500 for new front rotors and full hardware

Found some slotted replacements with hardware for $1314.00. Still shopping though.

StripclubDJ · 02-20-2019, 07:43 PM

Quote:

Originally Posted by Timujin

Quote:

Originally Posted by StripclubDJ

Quote:

Originally Posted by Timujin

Quote:

Originally Posted by HP Autosport

Quote:

Originally Posted by Dieselino

Anyone know where to get these and how much they are aswell as pads? Also anyone know if just the rings can be replaced and reuse the hats?

You can also use replacement 380x32 Aero Rings from Stoptech for $280 each front and $290 for the 380x35, which is a good savings from the Brembo rings. Hats are always reused unless found cracked. You have a wide range of replacement pads from low $100s to high 200s for street pads.

Quote:

Originally Posted by HP Autosport

Quote:

Originally Posted by Dieselino

Anyone know where to get these and how much they are aswell as pads? Also anyone know if just the rings can be replaced and reuse the hats?

You can also use replacement 380x32 Aero Rings from Stoptech for $280 each front and $290 for the 380x35, which is a good savings from the Brembo rings. Hats are always reused unless found cracked. You have a wide range of replacement pads from low $100s to high 200s for street pads.

Is this still being done?

This will not work on brembo kits with the H-bobbin front hat setup

If you hat hardware looks these these don't even try it, stoptechs don't fit
You'll be sucking up and paying around 1500 for new front rotors and full hardware

Found some slotted replacements with hardware for $1314.00. Still shopping though.

That's for partial hardware which is fine

I doubt you need to replace the H-bobbin things

07-15-2011, 08:26 PM	#1
Dieselino Captain 47 Rep 613 Posts Drives: 03 LSB M3 06 M coupe 08 M3 SG Join Date: Apr 2007 Location: Detroit iTrader: (2)	Replacement rotors from Brembo GT kits?? Anyone know where to get these and how much they are aswell as pads? Also anyone know if just the rings can be replaced and reuse the hats?
	Appreciate 0 Tweet Quote

07-15-2011, 08:31 PM	#2
wwjd15 Banned 89 Rep 1,315 Posts Drives: 11 E92 M3 MR Join Date: May 2009 Location: Orange County iTrader: (6)	Brembo sells them. They were selling for $500 range for a piece a couple of years ago.
	Appreciate 0 Quote

07-16-2011, 01:10 AM	#3
Checkcaptain Major 549 Rep 1,179 Posts Drives: BMW M4 GTS Join Date: Jan 2009 Location: Germany iTrader: (0)	I have 4 brand new drilled rotors - 2 fronts 380x34 and 2 rears 380x28
	Appreciate 0 Quote

07-16-2011, 07:02 AM	#4
Dieselino Captain 47 Rep 613 Posts Drives: 03 LSB M3 06 M coupe 08 M3 SG Join Date: Apr 2007 Location: Detroit iTrader: (2)	Brembo rotors? how much?
	Appreciate 0 Quote

07-17-2011, 05:58 PM	#5
bigjae1976 Major General 1570 Rep 8,075 Posts Drives: 11 E90 M3 Individual Join Date: Mar 2006 Location: Houston, TX iTrader: (22) Garage List 2004 BMW M3 [4.50] 2011 BMW E90 M3 [5.25] 2013 BMW 328i [5.00]	I think discs usually run in the $400 per disc depending on size and options. I think Turner sells them. __________________ 2018 F30 320iX Melbourne Red 2011 E90 M3 Monte Carlo Blue 2004 E46 M3 Imola Red 2000 E36/7 Z3 Steel Blue
	Appreciate 0 Quote

11-17-2015, 01:44 PM	#11
nholmes Track Whore 542 Rep 1,640 Posts Drives: women wild Join Date: Oct 2015 Location: Oahu / Los Angeles iTrader: (15)	Necro bump! I'm having a really hard time finding sites that sell replacement rotors for the rear in 380x28mm. The Brembo part numbers are 09.A186.13/23 (drilled/slotted) but googling those part numbers are almost always a dead end. Anyone have a site/shop they get their rotors from?
	Appreciate 0 Quote

02-20-2019, 08:25 AM	#15
Timujin Major 352 Rep 1,005 Posts Drives: GMC Sierra Join Date: Jul 2012 Location: California iTrader: (9) Garage List 2010 BMW M3 [0.00]	That looks like my hardware. Thank you. __________________ We grow food to feed the animals so we can eat the animals
	Appreciate 0 Quote

02-20-2019, 06:58 PM	#16
slonik Lieutenant 463 Rep 476 Posts Drives: e46 M3, e82v8 (s65 swapped) Join Date: Feb 2015 Location: Moscow Region, Zhukovsky iTrader: (2)	only 380x32, 355x32, 345x28, 332x32, 328x28 (brembo d-bobbins/stoptech t-bobbins) interchangable.
	Appreciate 2 StripclubDJ4100.00 Timujin351.50 Quote