|
|
09-10-2021, 12:33 PM | #1 |
New Member
3
Rep 18
Posts |
MPE V4 issues
Hi all,
I am having trouble attaching connecting pipes to the muffler section. They are nearly the exact same diameter and will not slip into place. I’m afraid to spread the inlets on the backbox for fear of damage or poor sealing afterward. Anyone seen this before? I searched and found no previous mention of it. Plaque states V4. Any advice would be appreciated. Thank you! [ATTACH][ATTACH][/ATTACH][/ATTACH] |
09-10-2021, 02:20 PM | #2 |
Major
503
Rep 1,055
Posts |
Autozone will lend you exhaust pipe expanders to open up the diameter of the ends on your last pic.
I had an issue the first time I installed my Corsa. I took apart some of the pieces after putting them together initially then found they were too close to same diameter when trying to reassemble. Exhaust expanders did the trick. |
Appreciate
0
|
09-10-2021, 03:00 PM | #4 |
Major General
2759
Rep 5,483
Posts |
It will leak slightly at that joint regardless. The included clamps will close things up to the extent you expand it a bit too much. You won't need much extra space. I used a screwdriver in the slotted expansion cuts to get them to slide in IIRC (this was like 8 years ago and it's still on there...so YMMV, lol)
__________________
|
Appreciate
0
|
09-10-2021, 07:36 PM | #6 |
Captain
852
Rep 659
Posts |
id you buy this recently? I just got mine last week and my part number doesnt have X4 on it, it ends with -03
d
__________________
2005 Phoenix Yellow E46 M3 6MT Coupe
2007 Imola Red Z4 M Coupe 2013 Interlagos Blue E92 M3 6MT ZCP CF roof |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|