|
|
|
KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
Post Reply |
|
Thread Tools | Search this Thread |
10-04-2018, 08:04 AM | #1 |
Private First Class
110
Rep 189
Posts |
Wheel fitment question
Hey guys, so I have a set of forgestar SDC that I had on my f80 m3. Fitment is as follows:
Front 19x9.5 ET +20 Rear 19x11 ET +40 What are the chances that these will fit my e92 m3 with ZCP? Other option would be to sell these and use money for different set I guess. Thanks for the help! |
10-04-2018, 01:17 PM | #2 |
Major General
2736
Rep 6,734
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
Front is good (depending on tire size). Rear would fit with 10mm to 15mm spacer depending on tire size.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M |
Appreciate
0
|
10-04-2018, 02:06 PM | #3 |
Lieutenant Colonel
802
Rep 1,566
Posts |
If the fronts are SDC, they will hit the brake calipers according to Forgestar. 19x9.5 SDC needs to be +13 to clear up front. 19x10 SDC needs to be +20. You *might* be able to get away with a 5mm spacer and it will be very tight.
As slicer said, the rears will also need a spacer.
__________________
Last edited by Iyzmi; 10-04-2018 at 02:15 PM.. |
Appreciate
0
|
10-04-2018, 04:53 PM | #4 | |
Major General
2736
Rep 6,734
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
Quote:
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M |
|
Appreciate
0
|
10-04-2018, 05:00 PM | #5 | ||
Lieutenant Colonel
802
Rep 1,566
Posts |
Quote:
__________________
|
||
Appreciate
0
|
10-04-2018, 07:02 PM | #6 | |||
Private First Class
110
Rep 189
Posts |
Quote:
For the front, I'm assuming I might rub on the outside? Might try pulling the front pins to get a little more camber. |
|||
Appreciate
0
|
Post Reply |
Bookmarks |
|
|