Sponsored by The Tire Rack

[GK77]

looking forward to my set

[ApexWheels]

18" SM-10RS

Wheels:
Forged SM-10RS
Front & Rear: 18x10 ET25

Tires:
Pirelli Pzero rain tires
Front & Rear: 285/645-18

Still Can't Find The Right Picture? Check Out Our Wheel Galleries For More Content!

[Expert@ApexWheels]

18" EC-7RS

Wheels:
Forged EC-7RS in Anthracite
Front & Rear: 18x10 ET25

Tires:
Maxxis RC-1
Front & Rear: 275/35-18

Additional Modifications:
bilstein b12 prokit suspension
vorshlag camber-caster plates
RD front sway bars

Still Can't Find The Right Picture? Check Out Our Wheel Galleries For More Content!

[ixat]

Hi would the specs in VS-5RS clear a Brembo GT 6 pot?

Front: 18x9.5" ET22 with 265/35-18 tires
Rear: 18x10.5" ET22 with 285/35-18 tires

[ApexWheels]

Originally Posted by ixat

Hi would the specs in VS-5RS clear a Brembo GT 6 pot?

Front: 18x9.5" ET22 with 265/35-18 tires
Rear: 18x10.5" ET22 with 285/35-18 tires

There are multiple Brembo GT kits available for the E9X M3. Our 18x9.5 ET22 VS-5RS clears the 1N1.9003A kit + the other rotor variants with no spacers for example. This is the most common kit you'll see run on these cars.

These wheels will not clear the 1T1.9010A 6 piston Brembo kit which is an updated caliper.

Another thing to note with these kits is that the paired rear brakes have a large mounting bolt that causes our 18" rear wheels to not clear the bolt. This applies to the following rear kits: "2P1.9013A, 2P1.9060A" REAR GT/GT-S/GT-R 4 piston 380x28mm

Hope that helps,

-Tom

[ixat]

Thanks Tom. Am considering to go 19” instead.

Would I need spacers based on specs below on the E92 M3 with ST XTA coilovers with the VS-5RS on 265/30/19 and 285/30/19

Front: 19x9.5" ET22
Rear: 19x10.5" ET22 or ET25

Originally Posted by ApexRaceParts

There are multiple Brembo GT kits available for the E9X M3. Our 18x9.5 ET22 VS-5RS clears the 1N1.9003A kit + the other rotor variants with no spacers for example. This is the most common kit you'll see run on these cars.

These wheels will not clear the 1T1.9010A 6 piston Brembo kit which is an updated caliper.

Another thing to note with these kits is that the paired rear brakes have a large mounting bolt that causes our 18" rear wheels to not clear the bolt. This applies to the following rear kits: "2P1.9013A, 2P1.9060A" REAR GT/GT-S/GT-R 4 piston 380x28mm

Hope that helps,

-Tom

[ApexWheels]

Originally Posted by ixat

Thanks Tom. Am considering to go 19” instead.

Would I need spacers based on specs below on the E92 M3 with ST XTA coilovers with the VS-5RS on 265/30/19 and 285/30/19

Front: 19x9.5" ET22
Rear: 19x10.5" ET22 or ET25

With the 19x9.5 ET22 up front, you shouldn't need any spacers to clear the ST XTA suspension or those Brembo brakes. The rear fitment would also be fine without spacers.

The rear offset for those wheels would be ET25.

-Tom

[Z33KLF]

Originally Posted by ApexWheels

Some of our customers do choose to run 18x9.5s all the way around! Our 18x9.5 ET22 is a direct fit for this application with either 265/35-18s or 275/35-18s.

Here are some photos a customer sent us with this exact setup. Big thanks to Santiago!

Wheel details:

• 18x9.5 ET22 SM-10s in Satin Black, square fitment.
• 275/35/18 RE71r's
• 15mm rear spacer (purely for aesthetics)
• Apex Red center caps

Additional mods:

• H&R Race Springs
• -1.5 degrees front and rear camber

Absolutely loving this set up

[Moutamid]

Apex EC7 Satin Bronze

F 18x9 ET31 245/40/18 12mm Spacer
R 18x10 ET25 265/40/18 15mm Spacer
Stock Suspension

[ApexWheels]

BMW E92 M3 with 18” VS-5RS in Brushed Clear

Wheels:
VS-5RS in Brushed Clear
Front: 18x9.5" ET22
Rear: 18x10.5" ET22


Tires:
Michelin Pilot Sport 4s Ultra High/Max Performance Summer
Front: 265/35-18
Rear: 285/35-18


Photo Credit:
@m.med1a










Fitment Guides

We know what fits. From direct bolt-on to all-out race fitments and everything in between. We've street and track tested extensively to save you the trial-and-error.

View our M3 guide.

[LWG]

VS-5RS 18x10.5 (3mm spacers in the rear) on Nankang CR-S 275/35/18

[TigerM3]

Originally Posted by LWG

VS-5RS 18x10.5 (3mm spacers in the rear) on Nankang CR-S 275/35/18

How much camber are you running to fit that 10.5 up front?

[LWG]

Originally Posted by TigerM3

How much camber are you running to fit that 10.5 up front?

-3.5

[CLUBBER]

APEX VS-5 RS in Brushed Clear Finish sourced by Driven34.

19x9,5 ET22 & 19x10.5 ET25 wrapped in 265/30/19-285/30/19 Michelin PS4S

[CLUBBER]

ApexWheels

[RalliartRsX]

Z

[MechEngineer408]

Will the ML-10RT in 18x10 +25 clear the AP Racing 9660?

[Expert@ApexWheels]

Originally Posted by MechEngineer408

Will the ML-10RT in 18x10 +25 clear the AP Racing 9660?

Thanks for the question. The 18x10 ET25 will clear that AP kit (13.01.10037) for the E9x M3 without any spacer required.

- Jasper