|
|
01-21-2021, 10:41 PM | #1 |
Private First Class
34
Rep 139
Posts |
Will it rub zcp stock height with 10mm spacer
I’m currently running 275/35/19 pss with 10mm spacers at the rear. If I switch to 285/30/19 pss with 10mm spacer will it rub? Any feedback will be greatly appreciated.
|
01-21-2021, 11:16 PM | #4 |
Private First Class
34
Rep 139
Posts |
Thanks mym3adventures!
Oem 19x10 rear wheel. Not sure about the offset? I have a very slight rub with my stock zcp wheel with 10mm spacers and stock height. Wondering if it will rub more with 285/30/19 or less? Thanks again guys! |
Appreciate
0
|
01-21-2021, 11:38 PM | #5 |
Captain
170
Rep 618
Posts |
I'm running 12mm lower on eibach springs and 265 35 19 I have 275s going on this summer no rubbing here
|
Appreciate
0
|
01-22-2021, 01:05 PM | #7 |
Captain
171
Rep 815
Posts |
|
Appreciate
0
|
01-23-2021, 10:37 AM | #8 |
Captain
348
Rep 702
Posts |
Check this thread for some good examples and feedback about spacers and rubbing: https://www.m3post.com/forums/showthread.php?t=262054
I had asked about a specific setup (15/12) and was told it would not rub, but it did.. ended up going 12.5/10 and all good, no rubbing and looks great. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|