|
|
07-14-2018, 07:33 PM | #1 |
奈良シカマル
905
Rep 482
Posts |
Shift Lever Malfunction
CC-ID 394
Was driving normally and got the error. I parked it, turned it off, turned it back on and it was normal for about a mile then it came back. Weird, but it let me downshift with the paddles. UPDATE: Scanned the car and these are the codes I got. Came to the conclusion that the shifter assembly needs to be replaced (61317842102).
__________________
Last edited by BRNDNSLVRA; 07-15-2018 at 12:43 PM.. |
07-16-2018, 08:39 AM | #3 |
BimmerPost Supporting Vendor
3741
Rep 2,907
Posts
Drives: 2011 E93 M3
Join Date: Nov 2014
Location: DFW, Texas
|
Happens sometimes, usually it doesn't come back after clearing the codes. If the code keeps coming back then there's an internal issue. Solution is to replace the shifter assembly.
|
Appreciate
1
wfdeacon881102.50 |
07-16-2018, 08:45 AM | #4 |
奈良シカマル
905
Rep 482
Posts |
Yeah we tried clearing it with the carly app (his other tool wouldnt work) and it did absolutely nothing. I ordered a used shift assembly. Should get here Wednesday. Will update.
__________________
|
Appreciate
1
deansbimmer3741.00 |
09-20-2018, 05:34 PM | #5 |
Second Lieutenant
67
Rep 288
Posts |
I got increased battery discharge warnings and finally went to dealer. They’re telling me I need to replace the DCT shifter as it’s drawing power when off. I assumed it would have been the EDC module that would be the root cause. Guess not. Never got any warnings though so I have no clue.
They’re telling me car needs reprogrammed after install. Doesn’t make sense to me but I trust them more than my local dealer. Did you have to reprogram? |
Appreciate
0
|
09-20-2018, 05:37 PM | #6 | |
奈良シカマル
905
Rep 482
Posts |
Quote:
__________________
|
|
Appreciate
0
|
09-20-2018, 05:43 PM | #7 | |
Second Lieutenant
67
Rep 288
Posts |
Quote:
Thank you! |
|
Appreciate
1
BRNDNSLVRA904.50 |
09-20-2018, 05:50 PM | #8 |
BimmerPost Supporting Vendor
3741
Rep 2,907
Posts
Drives: 2011 E93 M3
Join Date: Nov 2014
Location: DFW, Texas
|
The DKG can fault and cause a draw. A brand new DKG would require coding but they are not VIN flashed so a used one can be installed plug-and-play. Used ones are available much cheaper. I have a few available as well.
|
Appreciate
0
|
09-20-2018, 05:53 PM | #9 | |
Second Lieutenant
67
Rep 288
Posts |
Quote:
Thank you greatly for the response! |
|
Appreciate
0
|
09-21-2018, 09:20 AM | #10 |
BimmerPost Supporting Vendor
3741
Rep 2,907
Posts
Drives: 2011 E93 M3
Join Date: Nov 2014
Location: DFW, Texas
|
It is possible that it's an intermittent fault. ISTA-D software test modules can tell the tech if the fault is currently present or not and test the component. But most likely it's a permanent internal hardware fault. If you clear the faults and they return shortly afterwards then it just needs to be replaced.
It would make more sense to go through exhaustive diagnostics when paying for a brand new shifter (61317842102) at $750 plus coding costs, but at used prices (~$150) it just makes more sense to swap it out and move on. |
Appreciate
0
|
04-06-2019, 06:57 PM | #12 |
Enthusiast
14
Rep 19
Posts
Drives: 2011 e92 m3, 2011 x5m
Join Date: Jul 2017
Location: BC
|
Is it easy enough to install the dct gear selector/shifter assembly? Can it all be done topside or does the linkage require access underneath the car?
|
Appreciate
0
|
04-06-2019, 06:59 PM | #13 |
奈良シカマル
905
Rep 482
Posts |
You can do it on jackstands. Takes 30 minutes. Remove the old one prior.
__________________
|
Appreciate
0
|
04-08-2019, 12:31 PM | #14 | |
Second Lieutenant
134
Rep 272
Posts |
Quote:
A used unit would be plug and play, but if you are putting in a brand new unit it will require coding, otherwise the lighting on the DCT knob will stay on torch mode in full blast, which can be very annoying at night, even during the day to some
__________________
~ S65 + Harrop Love ~
|
|
Appreciate
1
MMateri13.50 |
08-13-2021, 05:14 PM | #15 | |
Enlisted Member
11
Rep 35
Posts
Drives: 2010 E90 M3
Join Date: Jan 2017
Location: Evansville, Indiana
|
Quote:
Last edited by ObviousLynx; 08-13-2021 at 05:14 PM.. Reason: Fat fingers |
|
Appreciate
0
|
02-09-2023, 05:52 AM | #16 |
Registered
0
Rep 1
Posts |
hello need some help,i hawe 335is whit DCT end i hawe shifter lever malfuction error,try too clear errors,but when i start the car second time this errors whill come back,end i cant swich trasmision,stucked in P, shoul i replase the shifter?
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|