ZCP Love

BayE30 · 03-24-2020, 10:04 AM

Quote:

Originally Posted by dimeo187

Square is the way. 10mm rear spacer.

Im running this exact setup. no rubbing at all. I cant imagine running 10mm front and 15mm rear with this setup, rub city.

LatifE90 · 03-24-2020, 12:28 PM

Quote:

Originally Posted by //steve\\

Quote:

Originally Posted by LatifE90

Finally completed my square setup 19x10 275/35/19 with 10mm fr spacer & 15mm rear on bilstein clubsport 2.8 degrees of camber up front

This looks amazing!

thank you!

LatifE90 · 03-24-2020, 12:29 PM

Quote:

Originally Posted by BayE30

Quote:

Originally Posted by dimeo187

Square is the way. 10mm rear spacer.

Im running this exact setup. no rubbing at all. I cant imagine running 10mm front and 15mm rear with this setup, rub city.

My wheel was touching the coil over up front that's why i threw a spacer on to clear it.

BayE30 · 03-24-2020, 12:34 PM

Quote:

Originally Posted by LatifE90

My wheel was touching the coil over up front that's why i threw a spacer on to clear it.

good to know. could a 5mm have cleared, or was 10mm the minimum?

LatifE90 · 03-24-2020, 12:36 PM

Quote:

Originally Posted by BayE30

Quote:

Originally Posted by LatifE90

My wheel was touching the coil over up front that's why i threw a spacer on to clear it.

good to know. could a 5mm have cleared, or was 10mm the minimum?

I only have a 10mm on hand but i will purchase a 5mm hopefully tomorrow and give that a shot

mapster37 · 03-25-2020, 07:06 PM

[IMG]undefined[/IMG]

just had oem zcp powder coated. and new ps4 all around.

slidewayscoupe · 03-25-2020, 08:06 PM

Quote:

Originally Posted by brantp

Quote:

Originally Posted by PTRAN

I miss the silver 359’s

Painting 359s black is a sin.

I beg your pardon?

Space Fox · 03-26-2020, 07:33 AM

Quote:

Originally Posted by slidewayscoupe

I beg your pardon?

I didn't stutter

Longboarder · 03-26-2020, 06:57 PM

Quote:

Originally Posted by brantp

Quote:

Originally Posted by slidewayscoupe

I beg your pardon?

I didn't stutter

There is a time for both! Although my black set is the knock off AG359's. Exactly the same except a little more aggressive front offset.

///SY33 · 03-29-2020, 03:43 PM

After 4 years I decided it was time for a change and join the dark side. Never thought I'd go with black wheels. It was a nice run with the silver ZCPs but it was definitely time to switch it up. I'm in love with her again

Running H&R Race and 18mm front/15mm rear spacers on both set-ups.

RE36TRO · 03-29-2020, 04:38 PM

Wow 15mm rear, that looks awesome. Lowered on 275/35 or still on the 265's?

///SY33 · 03-29-2020, 06:27 PM

Quote:

Originally Posted by RE36TRO

Wow 15mm rear, that looks awesome. Lowered on 275/35 or still on the 265's?

265/35 and thank you!

Blindside_137 · 03-29-2020, 08:14 PM

Quote:

Originally Posted by sy33

After 4 years I decided it was time for a change and join the dark side. Never thought I'd go with black wheels. It was a nice run with the silver ZCPs but it was definitely time to switch it up. I'm in love with her again

Running H&R Race and 18mm front/15mm rear spacers on both set-ups.

Space gray just goes so well with both! Had black on my last car. Loved the look.

///SY33 · 03-30-2020, 08:11 AM

Quote:

Originally Posted by Blindside_137

Space gray just goes so well with both! Had black on my last car. Loved the look.

Agreed. I was hesitant because a lot of the pictures online don't do the wheels justice. Gotta get them at the right angle in proper lighting. The fact they're gloss black helps as well--especially in the sun.

Dlpfcb · 03-30-2020, 08:22 AM

May be a dumb question but where does everyone get them in Gloss Black. Everything I have seen is matte black. Any help would be awesome.

///SY33 · 03-30-2020, 08:36 AM

Quote:

Originally Posted by Dlpfcb

May be a dumb question but where does everyone get them in Gloss Black. Everything I have seen is matte black. Any help would be awesome.

BMW only makes them in silver or satin black. I got mine from a member on here who had them powder coated.

Blindside_137 · 03-30-2020, 09:56 AM

Quote:

Originally Posted by Dlpfcb

May be a dumb question but where does everyone get them in Gloss Black. Everything I have seen is matte black. Any help would be awesome.

I previously had avant garde replica style 359 and while they were termed matte black they had a beautiful semi-gloss sheen to them. I loved it.

CSL_DNA · 04-03-2020, 11:00 AM

regensburg94 · 04-05-2020, 02:19 PM

Quote:

Originally Posted by CSL_DNA

[url=https://flic.kr/p/2iLBtZk]

Looks absolutely fantastic - esp from this rear 3/4 angle.

Danse92m3 · 04-07-2020, 01:03 PM

Quote:

Originally Posted by CSL_DNA

Beautiful, love the OEM+ look!

Space Fox · 04-12-2020, 09:49 AM

Think I'm finally getting my cleaning process down for these bad boys. Rinse, Chem Guys Diablo wheel cleaner, agitate w/ EZ detail brush, scrub w/ wheel brush, foam cannon, rinse. Should have taken a before and after but the results are the best I've had yet.
Anyone have good recommendations for wheel coatings? That's probably my next move.

Also curious if anyone has a way around the dreaded rusty dried water layer that forms on the rotors after a wash?

noremaC · 04-12-2020, 10:08 AM

Quote:

Originally Posted by brantp

Think I'm finally getting my cleaning process down for these bad boys. Rinse, Chem Guys Diablo wheel cleaner, agitate w/ EZ detail brush, scrub w/ wheel brush, foam cannon, rinse. Should have taken a before and after but the results are the best I've had yet.
Anyone have good recommendations for wheel coatings? That's probably my next move.

Also curious if anyone has a way around the dreaded rusty dried water layer that forms on the rotors after a wash?

Hyde's Serum Ruststopper @ Obsessed Garage

This will take care of exactly that.

03-25-2020, 07:06 PM	#1150
mapster37 Captain 362 Rep 924 Posts Drives: F80 Join Date: Sep 2018 Location: Davie iTrader: (2)	[IMG]undefined[/IMG] just had oem zcp powder coated. and new ps4 all around. Attached Images
	Appreciate 2 Longboarder3429.50 WalkerM34.50 Quote

03-29-2020, 03:43 PM	#1154
///SY33 Second Lieutenant 140 Rep 227 Posts Drives: 2013 X5M Join Date: Nov 2015 Location: Los Angeles iTrader: (0)	After 4 years I decided it was time for a change and join the dark side. Never thought I'd go with black wheels. It was a nice run with the silver ZCPs but it was definitely time to switch it up. I'm in love with her again Running H&R Race and 18mm front/15mm rear spacers on both set-ups. Attached Images Last edited by ///SY33; 07-16-2020 at 01:29 AM..
	Appreciate 3 Longboarder3429.50 Blindside_1376706.50 ilove90m365.00 Quote

03-29-2020, 04:38 PM	#1155
RE36TRO Lieutenant 212 Rep 431 Posts Drives: ///E36,E46,E92,F80 Join Date: Nov 2019 Location: Santa Clara, CA iTrader: (5)	Wow 15mm rear, that looks awesome. Lowered on 275/35 or still on the 265's?
	Appreciate 0 Quote

03-30-2020, 08:22 AM	#1159
Dlpfcb Captain 483 Rep 647 Posts Drives: AW E92 M3 Join Date: Aug 2017 Location: Idaho iTrader: (1)	May be a dumb question but where does everyone get them in Gloss Black. Everything I have seen is matte black. Any help would be awesome.
	Appreciate 0 Quote

04-03-2020, 11:00 AM	#1162
CSL_DNA Private 247 Rep 80 Posts Drives: E46 M3 ZCP / E92 M3 ZCP Join Date: Jan 2012 Location: arizona iTrader: (1)
	Appreciate 8 Blindside_1376706.50 wyatth3548.50 Tony B84.00 akkando5863.00 Space Fox1042.00 Longboarder3429.50 M3R12167.00 ///SY33140.00 Quote

04-12-2020, 09:49 AM	#1165
Space Fox Captain 1042 Rep 634 Posts Drives: 2012 Space Grey e92 M3 ZCP Join Date: Nov 2012 Location: Tampa, FL iTrader: (0) Garage List 2012 BMW M3 ZCP [0.00]	Think I'm finally getting my cleaning process down for these bad boys. Rinse, Chem Guys Diablo wheel cleaner, agitate w/ EZ detail brush, scrub w/ wheel brush, foam cannon, rinse. Should have taken a before and after but the results are the best I've had yet. Anyone have good recommendations for wheel coatings? That's probably my next move. Also curious if anyone has a way around the dreaded rusty dried water layer that forms on the rotors after a wash?
	Appreciate 2 noremaC241.50 Longboarder3429.50 Quote