|
|
02-18-2017, 09:27 AM | #508 |
Lieutenant Colonel
1616
Rep 1,588
Posts |
|
Appreciate
0
|
02-26-2017, 07:35 PM | #510 |
Private
4
Rep 61
Posts |
Just put 255/35R/19 MPS AS3+'s on Vorsteiner vf 101's (19x9.5 offset 22) in the front and sure enough I have rub at full lock during turning. Car is 2012 e92 ZCP with stock suspension. Researched and listened to a ton of feedback but apparently still made a mistake - Vorsteiner recommended 275/30/19's for the front but tire rack recommended 255/35/19's
__________________
2012 E92 Mineral White w/ Comp Pkg. DCT / MPE /Eventuri Intake / Evolve Stg. 1/ Vorsteiner V-FF 101's
|
Appreciate
0
|
02-26-2017, 07:52 PM | #511 |
Private First Class
11
Rep 101
Posts
Drives: Melbourne Red/ Black E92 M3
Join Date: Aug 2014
Location: Chicago
|
E92 M3 20" help
I want to run 20s on my e92 M3, anyway to make these work for me with spacers?
20x9 ET 25 and 20x10 ET 40 Currently lowered on eibach springs |
Appreciate
0
|
03-07-2017, 05:05 AM | #513 |
Lieutenant Colonel
1616
Rep 1,588
Posts |
|
Appreciate
0
|
03-07-2017, 06:45 AM | #514 | |
Colonel
1563
Rep 2,869
Posts |
Quote:
In your opinion, if staying with the stock Competition EDC suspension, is there a chance to get by with your setup and no spacers? I am interested in the 275/30/19 front and 305/30/19 rear. Wheels are 19" and ET22 9.5" front and 10.5" ET35 rear |
|
Appreciate
0
|
03-07-2017, 03:53 PM | #515 |
Private
8
Rep 70
Posts |
thanks, I read in here that 255/35 and 285/35 rub? I've seen some 30 profile on 19s and it just looks small profile and not right. other option was maybe 255/35 and 290/30. Then have tire rack recommend 255/35 and 275/35.
Last edited by layzie; 03-07-2017 at 08:29 PM.. |
Appreciate
0
|
03-08-2017, 03:58 AM | #516 |
Lieutenant Colonel
1616
Rep 1,588
Posts |
I would not run the 255/35 up front. The 30 profile looks fine when using a 265/275 up front and 285/295 rear.
|
Appreciate
0
|
03-08-2017, 01:49 PM | #517 |
Private
8
Rep 70
Posts |
Thanks for the help, 1 last question haha, what about running 255/35 on a 19x9 front and 275/30 on a 19x10. May go a different route and the other rout the wheels are about a half inch narrower and et30 . I saw the 255/35 and 275/30 mounted on the wheels and they looked good
|
Appreciate
0
|
03-08-2017, 05:34 PM | #518 | |
Lieutenant Colonel
1616
Rep 1,588
Posts |
Quote:
|
|
Appreciate
0
|
03-21-2017, 03:53 PM | #520 |
Retired: 2008 135i /// 2011 1M
76
Rep 300
Posts |
Hey guys,
Going to be running an HRE P40SC 19x9.5/19 X11 both et 25. -Ohlin Road and Tracks Im looking at the new Michelin pilot sport 4S I know for the front 265 30 19s would fit with no rub on the PSS PS4S-(25.3") overall diameter PSS-(25.3") overall diameter But for the rears I was wanting to run a 305 30 19 But can't seem to find if anyone is running the setup with success. I see many 295 30 19s PSS 295- 26" diameter. PS4S 295-26" diameter. But 305s would add about .3" in diameter. PSS 305-26.3" Diameter PS4S 305- 26.3" I'm not sure if it's the height of the tires or the actual width. If anyone can give me input on this before I pull the trigger, that would be awesome!! Thanks |
Appreciate
0
|
03-26-2017, 01:16 AM | #521 |
Lieutenant
59
Rep 425
Posts |
Work Meister S1 3 pc.
FRONT: 19x9.5 +23 O Disc with a 15 mm spacer with 245/35/19 tires. Gotta check on the tire brand lowered on KW HAS Sleevek kit on lowest setting = No rub (freeway bumps, speed bumps, full lock turns). So far no rubs at all. Fender gap: 7 mm REAR: 19x11 +17 O Disc with 275/35/19, tires are Federal RS-RR lowered on KW HAS Sleevek kit with about 3 turns to the lowest.= No rub (freeway bumps, speed bumps, Etc. ). So far no rubs at all. Fender gap: 10 mm Last edited by cb1; 03-26-2017 at 01:18 AM.. Reason: Spelling |
Appreciate
0
|
03-29-2017, 12:14 AM | #522 | |
Daily Driver
29
Rep 71
Posts |
Quote:
I ran 295/30/19 on 19x10.5 ET26 in the back for around 15k miles. Those rubbed the plastic fender liner at the top (inside) of the wheel arch, and the infamous "nub" where the fender liner meets the rear bumper. No damage to tire or car, and only happened with loaded down or severe bumps. The last 1k miles or so have been on 285/35/19 and rubbing is gone.
__________________
2012 E93 M3 Convertible : Alpine White / Black : KW V3 : Akra Ti : HRE : ModeCarbon GTS V2
Last edited by Rob_O; 03-29-2017 at 12:20 AM.. Reason: Added photo |
|
Appreciate
0
|
03-29-2017, 10:58 AM | #523 |
Second Lieutenant
45
Rep 271
Posts |
Purchasing this set of wheels/tires, wondering if it will rub on the ohlins (specifically on the spring) as I heard the OE style springs have rubbing issues (in the front) and a 5mm spacer is usually needed with an et25 on 275, so I would have to assume with an et20 with a 285 i would need a 10mm spacer (plus the extra width of the tire) so maybe 15mm spacer to be safe? Anyone have experience or insight?
Volk TE37SL 18x9.5 +22/ 18x10.5 +20 Hankook Ventus RS-3 285/35/18 275/35/18 Ohlins R/T Previous owner of the wheels was on different suspension but had no rubbing issues. |
Appreciate
0
|
04-01-2017, 07:00 AM | #524 | |
Captain
190
Rep 969
Posts |
Quote:
__________________
Sold 2011.5 E92 M3 ZCP.
|
|
Appreciate
0
|
04-01-2017, 02:14 PM | #525 |
Captain
190
Rep 969
Posts |
For anyone interested, I know you can fit 285/30-18's up front on 9" and likely 9.5" wheels with proper spacing.
__________________
Sold 2011.5 E92 M3 ZCP.
|
Appreciate
0
|
04-06-2017, 02:43 PM | #526 |
e90 my big fat lady!
49
Rep 290
Posts |
I am in my way for new tyres I am thinking to go for 255/35 and 275/35 pss4 with gts 359 m wheels
I am reading that same guys rubs others no What's going on ? Will have rub issues yes or no ? |
Appreciate
0
|
04-08-2017, 03:49 PM | #527 |
Second Lieutenant
48
Rep 257
Posts |
Hey guys so i'm looking at some F14's and wondering how the fitment will be.
I am lowered on H&R Sport Springs Front - 19x10 et23 with 255/35/19 Rear - 19x11 et25 with 285/30/19 |
Appreciate
0
|
04-08-2017, 04:13 PM | #528 |
Lieutenant Colonel
1616
Rep 1,588
Posts |
|
Appreciate
1
O2ShootTheJ47.50 |
Post Reply |
Bookmarks |
|
|