|
|
06-19-2013, 10:22 PM | #1 |
M Power
81
Rep 1,293
Posts |
EDC malfunction after installing springs
I just installed my H&R springs yesterday. After driving a mile, the EDC malfunction warning came up on the screen. Anybody know what this could possibility be caused by?
Any suggestions will be highly appreciated. Thanks, Jay |
06-20-2013, 12:30 AM | #2 |
Major General
2738
Rep 6,734
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
The front plugs on top of the shocks commonly come loose. Happened to me every time I had springs installed.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M |
Appreciate
0
|
06-20-2013, 06:55 AM | #3 |
///M Fan
366
Rep 2,159
Posts
Drives: '09 E92 M3 IB/'17 f85 X5M LBB
Join Date: Sep 2008
Location: Canton, GA.
|
What you have is a plug that didn't get plugged in correctly. That is all. Just un-plug and plug it back in. It should work then.
__________________
'09 E92 ///M3 Interlagos Blue,6MT,Silver Novillo Leather,CF Trim,Premium Package,Technology Package,Cold Weather Package,Premium Sound,19"Wheels,Moonroof-Toy/'17 X5M, Long Beach Blue, Executive Package,Technology Package, Lighting Package, Driver Assist, Full Mughello Red Interior, 21" wheels-Toy/'14 535i with M Sport and 19" wheels-Daily
|
Appreciate
0
|
06-20-2013, 10:26 AM | #4 |
Lieutenant
20
Rep 446
Posts |
|
Appreciate
0
|
06-26-2013, 07:10 AM | #8 |
M Power
81
Rep 1,293
Posts |
|
Appreciate
0
|
06-26-2013, 07:12 AM | #9 |
M Power
81
Rep 1,293
Posts |
Yes, I had the issue, the EDC light came on. It wasn't plugged in right. After plugging it in correctly, the code will still come on but after driving it for a few miles it will go away.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|