E92 on 19x10 Square ZCPs, 275/30 tires, H&R springs/modified suspension.

6ixSpd · 09-19-2017, 12:04 AM

In the spirit of keeping her OEM+, I threw on a pair of rear M359 wheels on the front axle

I absolutely love it! The turn in is simply monstrous and they fill out the fender well perfectly.

Here are some photos of the car on 19x10 ZCPs wrapped in 275/30/19 PSS all around.

Rears are using a 10mm spacer, none up front.
This size sits 99% identical to the stock front 19x9 ET31 245/35/19 and 15mm spacer setup, and is almost identical in overall diameter as well. The rear however has a bit slimmer overall diameter than the stock 265/35/19.
Dropped on H&R Sport Plus springs, modified top mounts and bumpstops.
ZERO rubbing whatsoever.
No fender modifications.
Stock camber arms/plates with front pins removed.

As seen from the front. The fat tires poking out by the bumper look so mean!

Front 3/4:

Rear 3/4:

Side profile:

GORDON.M3 · 09-19-2017, 12:25 AM

beefyyyyyyyyyy.

Edward · 09-19-2017, 09:59 AM

Looks great. I recall though that someone here did the exact same thing and also had spacers maybe and was slightly dropped and his fronts shattered both fenders....Careful on the dips.

xander_g · 09-19-2017, 10:26 AM

That's a good look!

b4hand · 09-19-2017, 11:39 AM

I so want to do this.

drivetolive · 09-19-2017, 11:48 AM

Looks and probably performs awesome! Square setups really do make a world of difference in the way the car handles.

I'm curious, how did lowering the car on H&R sports alter the characteristics of the car? Have you tracked it the car both before and after the springs?

SYT_Shadow · 09-19-2017, 01:25 PM

friggin beautiful

Richbot · 09-19-2017, 02:38 PM

Quote:

Originally Posted by Edward

Looks great. I recall though that someone here did the exact same thing and also had spacers maybe and was slightly dropped and his fronts shattered both fenders....Careful on the dips.

Think that guy used 265/35's

GSEN820 · 09-19-2017, 08:24 PM

Love the Square set up

Atomicteal_M3 · 09-19-2017, 09:50 PM

Quote:

Originally Posted by 6ixSpd

In the spirit of keeping her OEM+, I threw on a pair of rear M359 wheels on the front axle

I absolutely love it! The turn in is simply monstrous and they fill out the fender well perfectly.

Here are some photos of the car on 19x10 ZCPs wrapped in 275/30/19 PSS all around.

Rears are using a 10mm spacer, none up front.
This size sits 99% identical to the stock front 19x9 ET31 245/35/19 and 15mm spacer setup, and is almost identical in overall diameter as well. The rear however has a bit slimmer overall diameter than the stock 265/35/19.
Dropped on H&R Sport Plus springs, modified top mounts and bumpstops.
ZERO rubbing whatsoever.
No fender modifications.
Stock camber arms/plates with front pins removed.

As seen from the front. The fat tires poking out by the bumper look so mean!

Front 3/4:

Rear 3/4:

Side profile:

Love it!!

I ran a 20mm spacer in the rear on a 285/30/19 lowered on B&G springs. Not a single rub!

tdott · 09-20-2017, 07:39 AM

Love it!

Razkal · 09-20-2017, 08:13 AM

Looks amazing brother. You have always been a champ when it comes to fitment

Edward · 09-20-2017, 08:24 AM

Quote:

Originally Posted by Richbot

Think that guy used 265/35's

You're right. Didn't notice OP is on 245 square and kind of stretched them.

Dlpfcb · 09-20-2017, 08:47 AM

Gorgeous car. Thanks for sharing, where did you pick up the wheels from?

6ixSpd · 09-20-2017, 08:52 AM

Thanks guys! I have no regrets about this decision whatsoever - except maybe the money plunked down

Quote:

Originally Posted by Edward

Looks great. I recall though that someone here did the exact same thing and also had spacers maybe and was slightly dropped and his fronts shattered both fenders....Careful on the dips.

I don't fully recall but I'm pretty sure that person ran 265/35/19 fronts, which is ridiculously tall. I don't think it's possible for my setup to rub as it's fitment is literally identical to the stock + spacer combo that myself and countless people here also use.

Quote:

Originally Posted by drivetolive

Looks and probably performs awesome! Square setups really do make a world of difference in the way the car handles.

I'm curious, how did lowering the car on H&amp;R sports alter the characteristics of the car? Have you tracked it the car both before and after the springs?

Thanks man! I wasn't ever able to find the limit of the fronts on the street, so I can't even guess where the wider one lies lol. I'll be hitting Mosport on Oct 6th so we'll see how she does!

http://www.m3post.com/forums/showthread.php?t=423572 is the setup I'm running and it's perfect for my needs.

Quote:

Originally Posted by BLKLYZ

Love it!!

I ran a 20mm spacer in the rear on a 285/30/19 lowered on B&amp;G springs. Not a single rub!

Damn ,your rear fitment is sick!

Quote:

Originally Posted by Razkal

Looks amazing brother. You have always been a champ when it comes to fitment

Thanks man! We need to catch up soon.

Quote:

Originally Posted by Edward

You're right. Didn't notice OP is on 245 square and kind of stretched them.

Huh? I'm on 275/30/19 all around...

Quote:

Originally Posted by Dlpfcb

Gorgeous car. Thanks for sharing, where did you pick up the wheels from?

Thanks, I scored them off Craigslist.

Installsplus · 10-11-2017, 08:59 PM

Looks amazing. Well done!

jid2 · 10-21-2017, 12:42 PM

Trying to do the same thing, so legit!

slowm3 · 10-24-2017, 01:17 AM

Nice and clean!

StripclubDJ · 10-24-2017, 09:56 AM

Square ftw!

dmk08 · 10-24-2017, 11:47 AM

Man now I want to do this to my car because I hate the spacers on the front. I just need 4 rear GTS wheels..

6ixSpd · 10-29-2017, 08:53 PM

Quote:

Originally Posted by Installsplus

Looks amazing. Well done!

Quote:

Originally Posted by jid2

Trying to do the same thing, so legit!

Quote:

Originally Posted by slowm3

Nice and clean!

Quote:

Originally Posted by StripclubDJ

Square ftw!

Thanks gents!

Quote:

Originally Posted by dmk08

Man now I want to do this to my car because I hate the spacers on the front. I just need 4 rear GTS wheels..

That was the best part: not having to run any spacer up front. You can always buy new GTS wheels

ARPHOTO · 01-27-2018, 03:15 AM

Do the different stops alter the height any further, or would I get the same height result with just H&R Race/Sport Plus springs?

09-19-2017, 12:04 AM	#1
6ixSpd Save the manuals! 6012 Rep 6,740 Posts Drives: '16 M3, '23 718 Spyder Join Date: Feb 2016 Location: 416 iTrader: (4)	E92 on 19x10 Square ZCPs, 275/30 tires, H&R springs/modified suspension. In the spirit of keeping her OEM+, I threw on a pair of rear M359 wheels on the front axle I absolutely love it! The turn in is simply monstrous and they fill out the fender well perfectly. Here are some photos of the car on 19x10 ZCPs wrapped in 275/30/19 PSS all around. Rears are using a 10mm spacer, none up front. This size sits 99% identical to the stock front 19x9 ET31 245/35/19 and 15mm spacer setup, and is almost identical in overall diameter as well. The rear however has a bit slimmer overall diameter than the stock 265/35/19. Dropped on H&R Sport Plus springs, modified top mounts and bumpstops. ZERO rubbing whatsoever. No fender modifications. Stock camber arms/plates with front pins removed. As seen from the front. The fat tires poking out by the bumper look so mean! Front 3/4: Rear 3/4: Side profile: __________________ '16 M3 \| '23 718 Spyder Past: E92 M3, F87 M2, E39 M5, etc Last edited by 6ixSpd; 01-31-2018 at 12:39 AM..
	Appreciate 6 xander_g989.50 Atomicteal_M3744.50 ///Master83.50 swhat127.00 Scharbag2619.00 slow4dr66.00 Tweet Quote

09-19-2017, 12:25 AM	#2
GORDON.M3 Colonel 1414 Rep 2,995 Posts Drives: E92 M3 • F25 X3 M-Sport Join Date: Dec 2013 Location: LAX/YYZ/NRT iTrader: (11)	beefyyyyyyyyyy.
	Appreciate 1 6ixSpd6011.50 Quote

09-19-2017, 09:59 AM	#3
Edward Colonel 377 Rep 2,982 Posts Drives: 2013.9999 E92 Jerez ZCP Join Date: May 2010 Location: Los Angeles iTrader: (2)	Looks great. I recall though that someone here did the exact same thing and also had spacers maybe and was slightly dropped and his fronts shattered both fenders....Careful on the dips.
	Appreciate 1 6ixSpd6011.50 Quote

09-19-2017, 10:26 AM	#4
xander_g Major 990 Rep 1,123 Posts Drives: G30 M550i Join Date: Oct 2016 Location: Toronto iTrader: (2) Garage List 2018 BMW M550i Xdrive [0.00]	That's a good look!
	Appreciate 1 6ixSpd6011.50 Quote

09-19-2017, 11:39 AM	#5
b4hand Captain 661 Rep 966 Posts Drives: 2011 ZCP M3 Join Date: Jul 2017 Location: Austin, TX iTrader: (3)	I so want to do this.
	Appreciate 0 Quote

09-19-2017, 11:48 AM	#6
drivetolive Second Lieutenant 88 Rep 217 Posts Drives: Z4M Coupe Join Date: May 2017 Location: Toronto, Ontario, Canada iTrader: (3)	Looks and probably performs awesome! Square setups really do make a world of difference in the way the car handles. I'm curious, how did lowering the car on H&R sports alter the characteristics of the car? Have you tracked it the car both before and after the springs?
	Appreciate 1 6ixSpd6011.50 Quote

09-19-2017, 01:25 PM	#7
SYT_Shadow ///M Powered for Life 11469 Rep 10,328 Posts Drives: E90M/E92M/M4GTS/M4GT4/X5M Join Date: Sep 2010 Location: Greenwich, CT iTrader: (2)	friggin beautiful __________________ DIY: S65 Rod Bearings E9X PFC Z54 BBK on F8X BK harness bar + seats: fit 6 tires in an M3 do88 Cooling Goodies GTS Twins: GTMore project
	Appreciate 1 6ixSpd6011.50 Quote

09-19-2017, 08:24 PM	#9
GSEN820 Private First Class 62 Rep 143 Posts Drives: 2011 e92 M3 DCT Join Date: Aug 2011 Location: San Diego,CA iTrader: (2)	Love the Square set up __________________ IG @gsen_820
	Appreciate 1 6ixSpd6011.50 Quote

09-20-2017, 07:39 AM	#11
tdott Brigadier General 3938 Rep 3,980 Posts Drives: M3 Join Date: Nov 2010 Location: South FL / 6ix iTrader: (4)	Love it! __________________ N/A S65 Headers Before/After Dyno Results
	Appreciate 1 6ixSpd6011.50 Quote

09-20-2017, 08:13 AM	#12
Razkal Private 36 Rep 82 Posts Drives: '16 435i cabrio & '09 E90 328i Join Date: Jan 2011 Location: Toronto iTrader: (0)	Looks amazing brother. You have always been a champ when it comes to fitment __________________ 2016 F33 ///Msport 435 Cabrio - Sapphire Black / Fox Red 2009 E90 ///Msport 328i LCI Sedan - Space Grey / Saddle Brown
	Appreciate 1 6ixSpd6011.50 Quote

09-20-2017, 08:47 AM	#14
Dlpfcb Captain 483 Rep 647 Posts Drives: AW E92 M3 Join Date: Aug 2017 Location: Idaho iTrader: (1)	Gorgeous car. Thanks for sharing, where did you pick up the wheels from?
	Appreciate 0 Quote

10-11-2017, 08:59 PM	#16
Installsplus Ultimate Driving Machine E92ESS625 M3/G05 X5 Msport 40i Individual 456 Rep 2,000 Posts Drives: 2011 E92 M3 DCT/ESS 625 kit Join Date: Jan 2014 Location: Georgetown,ON iTrader: (4) Garage List 2011 BMW E92 M3 [10.00] 2019 X5 Msport 40i ... [8.25]	Looks amazing. Well done! __________________ "The Ultimate Driving Machine" 2011 E92 M3 supercharged ESS 625 2016 F15 X5 Msport 35i
	Appreciate 0 Quote

10-21-2017, 12:42 PM	#17
jid2 Private First Class 239 Rep 170 Posts Drives: '12 E92 M3 ZCP Join Date: Jan 2010 Location: Maple Valley- Redmond, WA iTrader: (2)	Trying to do the same thing, so legit!
	Appreciate 0 Quote

10-24-2017, 01:17 AM	#18
slowm3 Second Lieutenant 134 Rep 248 Posts Drives: e92 m3 Join Date: Oct 2017 Location: Vancouver, BC iTrader: (1)	Nice and clean!
	Appreciate 0 Quote

10-24-2017, 09:56 AM	#19
StripclubDJ Lieutenant Colonel 4097 Rep 1,605 Posts Drives: e92 m3 Join Date: May 2016 Location: calis iTrader: (2)	Square ftw!
	Appreciate 0 Quote

10-24-2017, 11:47 AM	#20
dmk08 Gone Fishin’ 7316 Rep 12,125 Posts Drives: Walks Join Date: Jul 2012 Location: Atlanta iTrader: (19)	Man now I want to do this to my car because I hate the spacers on the front. I just need 4 rear GTS wheels..
	Appreciate 0 Quote

01-27-2018, 03:15 AM	#22
ARPHOTO Alpinweiß Herrenrasse 15 Rep 92 Posts Drives: 2013 M3 Coupe, 2000 750il Join Date: Feb 2015 Location: Oregon iTrader: (1) Garage List 2000 BMW 750il [0.00] 2013 BMW M3 Coupe [0.00]	Do the different stops alter the height any further, or would I get the same height result with just H&R Race/Sport Plus springs? __________________ Instagram \| BMW CCA #503745
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search