 |
|
 |
|
|
|
| 10-19-2021, 02:22 AM | #1 |
|
New Member
0
Rep 8
Posts |
Pinout connectors DCT/DKG M3 E92 2008
Hi there.
Someone would be so kind to raise the pinout of said branch of cables that go up from the gearbox to the box where the motor ecu goes and it ended up in 3 connectors (black, blue and green). We need to reprogram the gearbox and know which are the positive, negative, can L and can H. Thank you!! |
| 10-19-2021, 07:04 AM | #2 |
|
mTekMods
2142
Rep 2,902
Posts |
can H is 7 at mechtronics
can L is 10 at mechatronics 12v power for dct is 16 at mechatronics chassis ground is 14 at mechtronics
__________________
2011 Frozen Black/Fox Red E90 M3 650+WHP
G-Power Supercharged First DCT to Manual Conversion Worldwide KW CS, BBS RI-A, BW Headers, Snow 2.5 |
|
Appreciate
0
|
| 10-19-2021, 07:51 AM | #3 | |
|
New Member
0
Rep 8
Posts |
Quote:
but are you telling me the pins on the round connector of the mechatronics ??? I need the pins on the blue and black connectors that are in the flashing area. the cable is not disassembled. |
|
|
Appreciate
0
|
| 10-19-2021, 03:31 PM | #5 |
|
New Member
0
Rep 8
Posts |
solved!!
DKG-Pin 14 red ---- Red pin 1 black, connector, VCC DKG-Pin 4 red ----- Red/green pin 4, black connector, VCC/ACC DKG-Pin 3 blue---- Brown cable braided, black connector, CAN L DKG-Pin 10 yellow-- Green cable braided, black connector, CAN H DKG-Pin 15 black---- Brown pin 1, blue connector, GND |
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
