New 2009/LCI iDrive controller installation...

Technic · 09-09-2009, 07:56 AM

Quote:

Originally Posted by lugnut

What would the solution to this be? Would I have the SW update installed with the original controller, then once back at my home, install the newer controller?

Yes...

Quote:

Originally Posted by aussiem3

If the computer has recognised a control unit that shouldn't be with this production run then it will not process the updated sw for the unit.

aussiem3 · 09-09-2009, 08:05 AM

I am going to get the software updated on mine. So what I am going to do is put the old controller back in so everything gets updated and once home install the new controller.

Or the other way is to specify at the start of the update that a new hardware had been installed. I don't know how the update would react to this given that the new controller is not recognised by the computer specific to the car.

The best bet is to remove the controller and put th old one in for the time it takes to update and swap straight after. Simple.

Lugnut, with yours if you put the old controller and update it will simply update the component it failed to update the first time. This can be done while you wait. 10 minutes max. Good luck!

MuchMoore · 10-06-2009, 08:39 PM

I have a NEW 09 iDrive Controller to go with my DCT trim if anyone is interested?

freshwhite335 · 10-06-2009, 11:54 PM

i really want to buy another console trim piece when i get my ///m and have my switches for my 9500ci and laser interceptor flush mounted

WCH · 10-11-2009, 03:36 PM

I just did my 4/08 DCT with controller 309, and it works great. It's a small mod and falls short of the new iDrive but I still like it.

STALKER · 10-17-2009, 09:56 AM

So if I have a Jan or Feg 08 build, Im out of luck?

Alex///M · 10-19-2009, 11:47 AM

Quote:

Originally Posted by STALKER

So if I have a Jan or Feg 08 build, Im out of luck?

I've got a February '08 build E90 and would really like to know this information too before I make the decision to order a controller and trim piece.

Thanks.

Technic · 10-19-2009, 12:04 PM

For pre-03/08 E9x M3 you need to make sure that you have the latest code in your car before trying this iDrive controler swap.

Alex///M · 10-20-2009, 11:15 AM

Quote:

Originally Posted by Technic

For pre-03/08 E9x M3 you need to make sure that you have the latest code in your car before trying this iDrive controler swap.

Technic, thanks for the response. How do I determine if I have the latest code? If it turns out I don't, what do I do to get my dealer to install the latest code and what changes (if any) will it make to my car?

Thanks.

MMAJNKE · 10-20-2009, 11:16 AM

+1

Technic · 10-20-2009, 11:32 AM

Quote:

Originally Posted by Alex///M

Technic, thanks for the response. How do I determine if I have the latest code? If it turns out I don't, what do I do to get my dealer to install the latest code and what changes (if any) will it make to my car?

Thanks.

Only the dealer can determine if your car requires a software update. What I have found by asking several dealers is that they don't really like to be messing too much with the car programming because it could result in modules becoming defective/disabled after the coding process. I don't know if this is because either BMW really designed a flimsy coding system or simply because dealers do not follow the correct procedure in coding vehicles. But definitely something must be wrong when all the dealers asked told me the same exact thing...

If you have a great relationship with your dealer techs/SA and you trust their job you could simply ask for your car to be coded with the latest firmware that your car can handle, but again be aware that shit could happen and most probably it will not be covered under warranty.

lugnut · 10-20-2009, 06:48 PM

Just to update, I had my car serviced last weekend and as part of the service my Idrive was reset and updated by the dealer (my idrive was locking up and reacting slowly).

Got the car back, plugged the new controller in and it worked no problem. All that was needed was the newest software.

Technic · 10-20-2009, 06:54 PM

Quote:

Originally Posted by lugnut

Just to update, I had my car serviced last weekend and as part of the service my Idrive was reset and updated by the dealer (my idrive was locking up and reacting slowly).

Got the car back, plugged the new controller in and it worked no problem. All that was needed was the newest software.

So that's all folks!

AwesomeM3 · 10-21-2009, 06:45 AM

Quote:

Originally Posted by lugnut

Just to update, I had my car serviced last weekend and as part of the service my Idrive was reset and updated by the dealer (my idrive was locking up and reacting slowly).

Got the car back, plugged the new controller in and it worked no problem. All that was needed was the newest software.

What was your production date?

Technic · 10-21-2009, 07:31 AM

Quote:

Originally Posted by AwesomeM3

What was your production date?

He stated 2/08

dnvrdrvr · 10-28-2009, 07:31 PM

I've been following this thread for a while and wanted to post my own experience. Installed mine tonight and everything works perfectly on my 3/08 production E90 M3.

First, MANY Thanks to Dan @ United. I ordered my console and controller Friday 10/23 and recieved them today 10/28. Super fast shipping and responded quickly to my PM asking about inventory - thanks Dan!!

I had my software updated last month when my amp was replaced. Part numbers installed are 65-82-9-213-309 (controller) and 51-16-7-903-960 (console). Everything went without a hitch (in large part to the OPs pics) and the new controller unit is SO much easier to use. Highly recommended mod!

REP1KRR · 10-30-2009, 11:01 PM

Quote:

Originally Posted by dnvrdrvr

First, MANY Thanks to Dan @ United. I ordered my console and controller Friday 10/23 and recieved them today 10/28. Super fast shipping and responded quickly to my PM asking about inventory - thanks Dan!!

Pricing?

e90m3japan · 11-01-2009, 10:57 AM

I bought the controller at the Japanese BMW dealer. I order the controller part numbered 048 but it came as 9189049.

I tried it but it didn't work 100%. all the buttons and functions worked except dial(scroll function) but the cross movement works.

any ideas?

Is it just my program old?

Alex///M · 11-03-2009, 10:32 AM

Is there a way to determine what version of programming my car has without taking it to the dealer?

Since I have an 02/08 build E90, if it's a matter of getting the latest programming to get the new iDrive controller to work, I'd like to make sure that is done and I have no issues as a result before I order and install the controller.

Thanks.

aussiem3 · 11-03-2009, 03:57 PM

When the car is updated the computer will use the latest available software. So there is no worry as to which version will be installed.

It's very important to return the car to original factory spec before updating any software. Once the update s done then plug-in the updated/latest hardware.

These computers are like Windows 95 and will not recognise new hardware unless specified at the vehicle identity stage as per my post in another thread.

I am getting my car updated on Friday, and when I take it in, I will plug-in the old controller so that the programming will go without a hitch. Hopefully.

dnvrdrvr · 11-03-2009, 11:15 PM

Quote:

Originally Posted by REP1KRR

Pricing?

Check their site, I think it was $430 for the controller & console. Also came with a new ashtray cover which I didn't think I would need... but ended up using because the finish was just different enough I would have noticed.

e90m3japan · 11-05-2009, 04:53 AM

what is the newest version of the update?
Can you please tell me because the dealer here in Japan, tells me they can't update idrive by it self. They say ECU also has to be updated.

also how do I find out what version I have now?

09-09-2009, 08:05 AM	#68
aussiem3 Colonel 274 Rep 2,664 Posts Drives: Goggomobil Join Date: Jul 2007 Location: Kangaroo land iTrader: (1) Garage List 2017 BMW X6/// F86 [0.00]	I am going to get the software updated on mine. So what I am going to do is put the old controller back in so everything gets updated and once home install the new controller. Or the other way is to specify at the start of the update that a new hardware had been installed. I don't know how the update would react to this given that the new controller is not recognised by the computer specific to the car. The best bet is to remove the controller and put th old one in for the time it takes to update and swap straight after. Simple. Lugnut, with yours if you put the old controller and update it will simply update the component it failed to update the first time. This can be done while you wait. 10 minutes max. Good luck! __________________ F86 X6///
	Appreciate 0

10-06-2009, 08:39 PM	#69
MuchMoore Colonel 82 Rep 2,325 Posts Drives: 08 E90 335i Join Date: Jul 2008 Location: CenFla iTrader: (28)	I have a NEW 09 iDrive Controller to go with my DCT trim if anyone is interested? __________________ \| Andrew \| M Technik \| BMW Performance \| BBS \| Forge \| V1 \| LUX \| Bilstein \| Precision-Sport \|
	Appreciate 0

10-06-2009, 11:54 PM	#70
freshwhite335 Colonel 146 Rep 2,882 Posts Drives: 991/RR Sport AB Join Date: Aug 2008 Location: 904 FL iTrader: (6) Garage List 2011 BMW 135i [0.00]	i really want to buy another console trim piece when i get my ///m and have my switches for my 9500ci and laser interceptor flush mounted __________________ 2014 Range Rover Sport Autobiography 2012.5 991 C2S 1978 Corvette
	Appreciate 0

10-11-2009, 03:36 PM	#71
WCH Lieutenant Colonel 347 Rep 1,844 Posts Drives: '20 M8C convertible Join Date: Nov 2006 Location: Boston iTrader: (8) Garage List 2022 Porsche Cayenn ... [0.00] 2020 BMW M8C [0.00] 2017 Porsche Macan GTS [0.00]	I just did my 4/08 DCT with controller 309, and it works great. It's a small mod and falls short of the new iDrive but I still like it.
	Appreciate 0

10-17-2009, 09:56 AM	#72
STALKER Brigadier General 169 Rep 3,831 Posts Drives: 997.2 GT3, Golf R Join Date: Feb 2009 Location: Toronto, ON iTrader: (5)	So if I have a Jan or Feg 08 build, Im out of luck? __________________
	Appreciate 0

10-19-2009, 12:04 PM	#74
Technic Lieutenant General 2277 Rep 12,996 Posts Drives: 2021 i3S, 2024 i4 M50 Join Date: Apr 2005 Location: Florida iTrader: (18)	For pre-03/08 E9x M3 you need to make sure that you have the latest code in your car before trying this iDrive controler swap.
	Appreciate 0

10-20-2009, 11:16 AM	#76
MMAJNKE MMA Changed My Life! 317 Rep 6,629 Posts Drives: e92 m3 & f30 328i Join Date: Oct 2007 Location: so cal iTrader: (48) Garage List "2006 sport bi ... [0.00] 2008 e92 coupe [0.00]	+1
	Appreciate 0

10-20-2009, 06:48 PM	#78
lugnut First Lieutenant 8 Rep 354 Posts Drives: 2008 E92 M3 Space/Fox Join Date: Jun 2008 Location: Watchung, NJ iTrader: (0)	Just to update, I had my car serviced last weekend and as part of the service my Idrive was reset and updated by the dealer (my idrive was locking up and reacting slowly). Got the car back, plugged the new controller in and it worked no problem. All that was needed was the newest software. __________________ 18 XC90 T6 Inscription (Silver/Black) 16 981 GTS (All Black Everything) 12 E70 X5d Black Saphire/ Tobacco (RIP) 08 E92 M3 SG/Fox Red Gintani Race (sold), RG63 02 E46 M3 Cab Imola, E36 Z3 Atlanta Blue/Tan
	Appreciate 0

10-28-2009, 07:31 PM	#82
dnvrdrvr Captain Obvious 90 Rep 977 Posts Drives: 2018 VW GTI SE Join Date: Jul 2009 Location: Denver, CO iTrader: (9)	Worked for me... I've been following this thread for a while and wanted to post my own experience. Installed mine tonight and everything works perfectly on my 3/08 production E90 M3. First, MANY Thanks to Dan @ United. I ordered my console and controller Friday 10/23 and recieved them today 10/28. Super fast shipping and responded quickly to my PM asking about inventory - thanks Dan!! I had my software updated last month when my amp was replaced. Part numbers installed are 65-82-9-213-309 (controller) and 51-16-7-903-960 (console). Everything went without a hitch (in large part to the OPs pics) and the new controller unit is SO much easier to use. Highly recommended mod!
	Appreciate 0

11-01-2009, 10:57 AM	#84
e90m3japan Second Lieutenant 17 Rep 226 Posts Drives: e90 m3 melbourne Red Metallic Join Date: May 2009 Location: Yokohama,Japan and El Paso,Texas iTrader: (2)	I bought the controller at the Japanese BMW dealer. I order the controller part numbered 048 but it came as 9189049. I tried it but it didn't work 100%. all the buttons and functions worked except dial(scroll function) but the cross movement works. any ideas? Is it just my program old? __________________ e90 m3 melbourne red metallic, "One and Only" e90 sedan Amuse Ericsson full exhaust(new model)with custom spec, Afe intake with stock box,piano black trim, blackline tail, HRE P40 9x19,10.5x19
	Appreciate 0

11-03-2009, 10:32 AM	#85
Alex///M E90 - the Ultimate family hauler 22 Rep 578 Posts Drives: 2008 E90 ///M3 Join Date: Dec 2008 Location: Halifax iTrader: (15)	Is there a way to determine what version of programming my car has without taking it to the dealer? Since I have an 02/08 build E90, if it's a matter of getting the latest programming to get the new iDrive controller to work, I'd like to make sure that is done and I have no issues as a result before I order and install the controller. Thanks. __________________ 2008 AW E90 M3 - current 2002 TIAG E46 M3 - gone 1991 DiamondSchwartz E30 M3 - gone but not forgotten
	Appreciate 0

11-03-2009, 03:57 PM	#86
aussiem3 Colonel 274 Rep 2,664 Posts Drives: Goggomobil Join Date: Jul 2007 Location: Kangaroo land iTrader: (1) Garage List 2017 BMW X6/// F86 [0.00]	When the car is updated the computer will use the latest available software. So there is no worry as to which version will be installed. It's very important to return the car to original factory spec before updating any software. Once the update s done then plug-in the updated/latest hardware. These computers are like Windows 95 and will not recognise new hardware unless specified at the vehicle identity stage as per my post in another thread. I am getting my car updated on Friday, and when I take it in, I will plug-in the old controller so that the programming will go without a hitch. Hopefully. __________________ F86 X6///
	Appreciate 0

11-05-2009, 04:53 AM	#88
e90m3japan Second Lieutenant 17 Rep 226 Posts Drives: e90 m3 melbourne Red Metallic Join Date: May 2009 Location: Yokohama,Japan and El Paso,Texas iTrader: (2)	what is the newest version of the update? Can you please tell me because the dealer here in Japan, tells me they can't update idrive by it self. They say ECU also has to be updated. also how do I find out what version I have now? __________________ e90 m3 melbourne red metallic, "One and Only" e90 sedan Amuse Ericsson full exhaust(new model)with custom spec, Afe intake with stock box,piano black trim, blackline tail, HRE P40 9x19,10.5x19
	Appreciate 0