19x10 359 wheels on stock edc suspension

shane060 · 04-26-2013, 01:56 PM

I hace just purchased a set of the ZCP 359 wheel 19x10 et 25 all 4. I will be putting these on my 2011 M3 stock EDC suspension but I was curious if anyone can help me with rubbing issues on this or not??? . I am going to run the Michelin ps2 front 265-35 19 and rear 275-35-19 but I am worried about rubbing.

1MOREMOD · 04-26-2013, 02:04 PM

Front will probably rub. 265-30 is more likely to work. I've ran that but on non zcp car.

shane060 · 04-26-2013, 02:10 PM

Its a non zcp (correction) so your saying 265 30 front and 275 30 rear or keep the rear 275 35?

1MOREMOD · 04-26-2013, 02:24 PM

Quote:

Originally Posted by shane060

Its a non zcp (correction) so your saying 265 30 front and 275 30 rear or keep the rear 275 35?

Rear should work either way but I would just go 265-30 on all 4 then you can rotate around for better wear and it dials out a bit of the understeer character that is part of the car stock.

shane060 · 04-26-2013, 02:30 PM

Ya I just got confirmation on this.. Looks like IM going to go with the 19x9 front et 18 and 19x10 et 25 and run a 5-10 mm spacer on the rear depending on how she looks first off. Tires will be 255-35-19 and 285-35-19 Im looking at

FVM3 · 04-26-2013, 03:57 PM

go for 265 all around

1MOREMOD · 04-26-2013, 05:23 PM

Quote:

Originally Posted by FVM3

go for 265 all around

+1 tried to recommend that. I have ad08s in 265 square that worked well.

shane060 · 04-26-2013, 05:33 PM

265 on a 19x10? Idk dosent that get into the stretched look? Would you all rather go with the 19x10 Square setup or stick with the regular ZCP 19x9 and 19x10? with the 255 35 and 285 35?

1MOREMOD · 04-26-2013, 05:44 PM

Didn't think of that mine is on 9.5 rim.

shane060 · 04-26-2013, 05:47 PM

It will work dont get me wrong But depending on tire brand it might seem stretched to some. 265 is definitely the lowest you would want on a 10 inch rim.

skidmarq · 04-26-2013, 08:45 PM

There are quite a few who went 275/30/19 on the square setup with 359Ms (rears all around). Seems to work well with no rubbing and what I'm leaning toward at the moment...

Here is an example of the configuration using Nitto NT555s: http://www.m3post.com/forums/showpos...8&postcount=20

sergkoko · 04-28-2013, 02:47 PM

i have same wheels 19x10 all around with 275/30 front and 295/30 rear pilot super sports on a non zcp car and i have no rubbing just my two cents

manari06 · 04-28-2013, 02:52 PM

I'm running 265/30/19 front and 295/30/19 Rear no issues at all!!!

shane060 · 04-29-2013, 02:37 PM

Thanks for all the input!

04-26-2013, 01:56 PM	#1
shane060 Second Lieutenant 89 Rep 229 Posts Drives: 2015 M235 6spd 2011 M3 DCT Join Date: Nov 2009 Location: SA TX iTrader: (1) Garage List 2011 M3 [0.00]	19x10 359 wheels on stock edc suspension I hace just purchased a set of the ZCP 359 wheel 19x10 et 25 all 4. I will be putting these on my 2011 M3 stock EDC suspension but I was curious if anyone can help me with rubbing issues on this or not??? . I am going to run the Michelin ps2 front 265-35 19 and rear 275-35-19 but I am worried about rubbing.
	Appreciate 0 Tweet Quote

04-26-2013, 02:04 PM	#2
1MOREMOD - 11817 Rep 23,187 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	Front will probably rub. 265-30 is more likely to work. I've ran that but on non zcp car.
	Appreciate 0 Quote

04-26-2013, 02:10 PM	#3
shane060 Second Lieutenant 89 Rep 229 Posts Drives: 2015 M235 6spd 2011 M3 DCT Join Date: Nov 2009 Location: SA TX iTrader: (1) Garage List 2011 M3 [0.00]	Its a non zcp (correction) so your saying 265 30 front and 275 30 rear or keep the rear 275 35?
	Appreciate 0 Quote

04-26-2013, 02:30 PM	#5
shane060 Second Lieutenant 89 Rep 229 Posts Drives: 2015 M235 6spd 2011 M3 DCT Join Date: Nov 2009 Location: SA TX iTrader: (1) Garage List 2011 M3 [0.00]	Ya I just got confirmation on this.. Looks like IM going to go with the 19x9 front et 18 and 19x10 et 25 and run a 5-10 mm spacer on the rear depending on how she looks first off. Tires will be 255-35-19 and 285-35-19 Im looking at
	Appreciate 0 Quote

04-26-2013, 03:57 PM	#6
FVM3 Major General 273 Rep 5,751 Posts Drives: e92 m3, f30 328i Join Date: Sep 2010 Location: Los Angeles iTrader: (2)	go for 265 all around
	Appreciate 0 Quote

04-26-2013, 05:33 PM	#8
shane060 Second Lieutenant 89 Rep 229 Posts Drives: 2015 M235 6spd 2011 M3 DCT Join Date: Nov 2009 Location: SA TX iTrader: (1) Garage List 2011 M3 [0.00]	265 on a 19x10? Idk dosent that get into the stretched look? Would you all rather go with the 19x10 Square setup or stick with the regular ZCP 19x9 and 19x10? with the 255 35 and 285 35?
	Appreciate 0 Quote

04-26-2013, 05:44 PM	#9
1MOREMOD - 11817 Rep 23,187 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	Didn't think of that mine is on 9.5 rim.
	Appreciate 0 Quote

04-26-2013, 05:47 PM	#10
shane060 Second Lieutenant 89 Rep 229 Posts Drives: 2015 M235 6spd 2011 M3 DCT Join Date: Nov 2009 Location: SA TX iTrader: (1) Garage List 2011 M3 [0.00]	It will work dont get me wrong But depending on tire brand it might seem stretched to some. 265 is definitely the lowest you would want on a 10 inch rim.
	Appreciate 0 Quote

04-26-2013, 08:45 PM	#11
skidmarq Private 21 Rep 81 Posts Drives: 2015 F82 M4 Join Date: Jan 2013 Location: Driver's Seat iTrader: (4)	There are quite a few who went 275/30/19 on the square setup with 359Ms (rears all around). Seems to work well with no rubbing and what I'm leaning toward at the moment... Here is an example of the configuration using Nitto NT555s: http://www.m3post.com/forums/showpos...8&postcount=20
	Appreciate 0 Quote

04-28-2013, 02:47 PM	#12
sergkoko Comrade 56 Rep 211 Posts Drives: 15 M4 DCT Join Date: Sep 2011 Location: Tucson, AZ iTrader: (0) Garage List 2015 BMW M4 [0.00]	i have same wheels 19x10 all around with 275/30 front and 295/30 rear pilot super sports on a non zcp car and i have no rubbing just my two cents __________________ 15 M4 / 14 M235i-Sold / 09 E92 M3-Sold / 07 E92 335i-Sold
	Appreciate 0 Quote

04-28-2013, 02:52 PM	#13
manari06 Major 136 Rep 1,128 Posts Drives: 2013 E92 M3, 2016 X5 50i Join Date: Jan 2010 Location: Pueblo West, CO iTrader: (6) Garage List 2013 BMW M3 E92 [9.50] 2007 335I Coupe [10.00]	I'm running 265/30/19 front and 295/30/19 Rear no issues at all!!! __________________ I Am The Strength Behind The Fight!
	Appreciate 0 Quote

04-29-2013, 02:37 PM	#14
shane060 Second Lieutenant 89 Rep 229 Posts Drives: 2015 M235 6spd 2011 M3 DCT Join Date: Nov 2009 Location: SA TX iTrader: (1) Garage List 2011 M3 [0.00]	Thanks for all the input!
	Appreciate 0 Quote