|
|
09-27-2017, 09:50 AM | #1 |
First Lieutenant
383
Rep 369
Posts |
Lost my Connector to MAF sensor, where to buy?
Hi guys. I was removing the plenum recently and the connector the (I believe) MAF sensor at the front of the plenum broke off and a new one will need to be soldered to the wires. I somehow managed to los the connecting piece. My only problem is that I cannot for the life of me find where to by the connecter or the part number for the connector. Can anyone help?
|
10-02-2017, 06:07 AM | #2 |
Lieutenant Colonel
480
Rep 1,600
Posts |
One of the easiest connectors to find!
Look for a Bosch EV3 injector connector. Or bring your intake air temp sensor to a wrecking yard, head towards the VW section and start looking. Those things are full of them |
Appreciate
0
|
10-02-2017, 06:34 AM | #3 |
Lieutenant General
5178
Rep 10,555
Posts |
Depends on where that little slot along the top is located -- the center groove one in the picture above would not fit a sensor or injector with an offset or double groove, for example. BMW may have varied them so people don't misconnect them. Luckily this one is easy enough to inspect with the plenum installed.
Last edited by pbonsalb; 10-04-2017 at 01:36 PM.. |
Appreciate
0
|
02-07-2018, 02:52 PM | #5 |
First Lieutenant
383
Rep 369
Posts |
Okay, I got the part in the mail and it does not have the prongs. It's just a plastic part. Not sure what to do.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|