DriveLogic Gear Shifting Button Sticking

[Ximian]

Recently noticed that the button to control the DriveLogic settings below the gear shifting is sticking when pushing the button on the "right/up" side but not "left/down" side. The button itself when removed works normally and there is no debris between the button and the cover.

As it may be a bit too late for botox injections to effectively tighten the leather cover on that side of the button, what are my other options for treating the leather to give the button more space?

[kevin @ eas]

Mine does the same thing when you change the settings. I would try popping out the button from underneath and cleaning the leather surround out. Possibly hitting it with a high grit sandpaper to add more clearance, then reinstall.

[Timujin]

Button on my car does the same. Although I haven't checked it since the evaporator replacement.