|
|
04-24-2019, 12:38 AM | #1 |
Lieutenant
73
Rep 404
Posts |
Adaptive lights
Hello,
I upgraded my headlights with a set from Bayoptiks, unfortunately now I am getting an "Adaptive Headlight" error. As per Bayoptiks I have tried to adjust the position of the projector (two knobs) so it doesnt hit the shroud when the projector moves but that didnt help. I know both my Adaptive Control Modules work as before doing the headlight upgrade I had no issues, however, I would like to double check with a set of working modules. Do any of you have a spare set of headlights or set of adaptive control modules? I literally need them for 10 minutes. I have the whole front end of the car taken apart and in jack stands so I can put it in and out in 5 mins... Hopefully someone local to West Palm Beach can chime in. Just to clarify, this is the adaptive control module not the ballast. It is a small black plastic cover located at the bottom of each headlight and is secured with 4 screws. Thanks in advance! |
Post Reply |
Bookmarks |
|
|