♦ Sonic MS | Verstraβe Aluminum Extended DCT Shifter Paddles

03BeastCharmer · 09-26-2012, 10:37 PM

Sorry for poorly describing, but I was talking about the flat surfaces that looked like they have been raked/brushed to create the grooves. I was wondering if that maintains it's "brushed" finish with extended use.

TurboBimmer · 09-27-2012, 06:46 AM

Quote:

Originally Posted by 03BeastCharmer

Sorry for poorly describing, but I was talking about the flat surfaces that looked like they have been raked/brushed to create the grooves. I was wondering if that maintains it's "brushed" finish with extended use.

Actually, you never touch the front (driver-facing) side of the paddles. Your fingers only touch the backside to pull them towards you and engage the shift. So it's really not an issue

lorinzo · 11-13-2012, 05:14 PM

I was stumped about this for a bit as well when I did my install.

I was able to find the holes by feeling around the area.... small soft spots in the back of the steering wheel. Press a little and can see the slit to insert screw driver.

Quote:

Originally Posted by Dellort_M3

I had the same problem. It took me 20 mins. You have to feel around for the slits. They are covered under the material around the wheel. You actually have to puncture through the material with your screwdriver to pop off the airbag. Heres an attached pic of your pic, Ive circled the slit. Its that dimple there. Just close your eyes and believe me its behind there.

surlynkid · 12-09-2012, 07:46 AM

Quote:

Originally Posted by Cal@Sonic MS

Detailed DIY / Instructions:

i am struggling to see exactly where to push to release this clip with the gray wire. somehow i got lucky on the + shifter paddle, and it came undone. i cannot get the wire harness off for the - shifter paddle. i had to put it all back together with a nice upshift paddle and an OEM downshift paddle. i want to get back in there, but i just don't see how to release that clip. any tips are appreciated.

phrozen06 · 12-09-2012, 10:31 AM

gr8 thread

lorinzo · 12-09-2012, 10:33 PM

I had trouble disconnecting the wires so I left them attached. Makes for a tight work place but was able to complete the install.

Quote:

Originally Posted by surlynkid

i am struggling to see exactly where to push to release this clip with the gray wire. somehow i got lucky on the + shifter paddle, and it came undone. i cannot get the wire harness off for the - shifter paddle. i had to put it all back together with a nice upshift paddle and an OEM downshift paddle. i want to get back in there, but i just don't see how to release that clip. any tips are appreciated.

surlynkid · 12-10-2012, 09:34 AM

Quote:

Originally Posted by lorinzo

I had trouble disconnecting the wires so I left them attached. Makes for a tight work place but was able to complete the install.

i was considering that option. since i did the other one on the bench, i know what i need to do and think I can get away with that.

Cal@Sonic MS · 01-04-2013, 01:19 PM

V2.0 still in progress...depending on how many people can bug Darwin...

AV9 · 01-16-2013, 02:26 AM

Quote:

Originally Posted by Cal@Sonic MS

V2.0 still in progress...depending on how many people can bug Darwin...

what would be the difference?

rantarM3 · 02-01-2013, 02:00 PM

Quote:

Originally Posted by surlynkid

i am struggling to see exactly where to push to release this clip with the gray wire. somehow i got lucky on the + shifter paddle, and it came undone. i cannot get the wire harness off for the - shifter paddle. i had to put it all back together with a nice upshift paddle and an OEM downshift paddle. i want to get back in there, but i just don't see how to release that clip. any tips are appreciated.

This was the hardest part for the install for me. I tried and tried and could not get the clips undone. Then I put on a rubber glove (the yellow kind used to wash dishes), took hold of the clip, and wiggled slightly as I pulled with some force. The glove gave me the necessary grip to undo the plugs.

By the way, these paddles are great!

dustman · 02-06-2013, 09:48 AM

What's his email so we can bug him, and what wil 2.0 offer?

Quote:

Originally Posted by Cal@Sonic MS

V2.0 still in progress...depending on how many people can bug Darwin...

Cal@Sonic MS · 02-06-2013, 12:06 PM

Quote:

Originally Posted by dustman

What's his email so we can bug him, and what wil 2.0 offer?

His email is darwin@sonicms.net, v2.0 would offer a revised design...but no added functionality.

NightStalker · 02-20-2013, 12:34 PM

Quote:

Originally Posted by Cal@Sonic MS

Another install - another happy customer!

So this does work on a non m3 ?..

Cal@Sonic MS · 02-21-2013, 12:13 PM

Quote:

Originally Posted by KSF

So this does work on a non m3 ?..

Yes provided you have a M3 steering wheel installed...

TurboBimmer · 04-09-2013, 05:02 AM

Any updates on the v2.0 design?

Cal@Sonic MS · 04-09-2013, 11:41 AM

Quote:

Originally Posted by Autobahn335i

Any updates on the v2.0 design?

To be honest at this juncture I don't believe we'll release a v2.0 design.

tmntmn · 04-09-2013, 03:36 PM

one of the best and cleanness looking paddles

ChrisK · 04-14-2013, 09:50 AM

I just ordered a set in Gunmetal

tmntmn · 04-16-2013, 01:18 PM

Quote:

Originally Posted by ChrisK

I just ordered a set in Gunmetal

You'll love it! perfect match with PSW

ChrisK · 04-21-2013, 09:07 PM

I installed these, and all I can say is perfect!

No need for version 2.0 of these extended paddles. The Gunmetal is perfect, the paddles don't stick out as do the oem silver. I was hesitant at first given the cutouts on the paddles, but they feel lighter and more easily engaged.

I recommend these 100%!!

Word of advice, don't forget to plug in the airbag cable before re-connecting your battery - now I need to have the airbag warning code cleared. My fault.

norman@sonicms · 05-28-2013, 02:35 AM

Glad you like it ChrisK!

TheEnrique · 06-30-2013, 06:44 PM

pm please gunmetal to 07650

09-26-2012, 10:37 PM	#111
03BeastCharmer Lieutenant Colonel 257 Rep 1,660 Posts Drives: '13 M3 Join Date: Oct 2007 Location: Houston iTrader: (3)	Sorry for poorly describing, but I was talking about the flat surfaces that looked like they have been raked/brushed to create the grooves. I was wondering if that maintains it's "brushed" finish with extended use. Attached Images __________________ Current: '13 E92 M3 Euro Delivery Gone: E86 M Coupe; E30 M3, E39 M5, E36 M3
	Appreciate 0 Quote

12-09-2012, 10:31 AM	#115
phrozen06 Lieutenant Colonel 229 Rep 1,773 Posts Drives: 328it, RIP M3, E46 Sold Join Date: Jan 2006 Location: 39°27'33"N 77°58'04"W W. Virgina, Kansas iTrader: (2)	gr8 thread __________________
	Appreciate 0 Quote

01-04-2013, 01:19 PM	#118
Cal@Sonic MS 430 Rep 4,650 Posts Drives: bmw Join Date: Jan 2011 Location: earth iTrader: (2)	V2.0 still in progress...depending on how many people can bug Darwin...
	Appreciate 0 Quote

04-09-2013, 05:02 AM	#125
TurboBimmer Lieutenant Colonel 79 Rep 1,618 Posts Drives: F82 M4 Join Date: Mar 2009 Location: Luxembourg iTrader: (5)	Any updates on the v2.0 design? __________________ Performance Seats, Exhaust, Splitters, Pedals, Steering Wheel / RB Turbos / M3 CF Roof / Brembo GT BBK 355/345 / Rollcage / Forge FMIC / Quaife LSD / Öhlins Road & Track / M3 Suspension Parts / Solid Subframe Bushings / Vorshlag Camberplates / Megan Racing Toe Links / LeatherZ Gauges / Extended M3 DCT Paddles / ER Sports OC / AR OC / Aux Radiator / AR DPs / Alpina TCU / COBB Pro-Tune
	Appreciate 0 Quote

04-09-2013, 03:36 PM	#127
tmntmn ///M 160 Rep 1,867 Posts Drives: e92 M3/M-DCT Join Date: Feb 2008 Location: Bay Area iTrader: (6)	one of the best and cleanness looking paddles __________________ THANKS TO:~<RPM>~ ~<SONICMS>~ ~<MODECARBON>~ ~<McKennaPerformance>~ MODS: MODECARBON V2 GTS FRONT LIP & REAR DIFFUSER, AA GREEN FILTER, RPI SCOOPS, PSW, Verstraβe Extended DCT Shifter, ZCP WHEELS (SEMI-GLOSS), OHLINS R&T, Megan Exhaust, AKRA XPIPE, BMW LED INTERIOR, BLACKOUT W/ORION V4 LED AE, OSRAM CBI
	Appreciate 0 Quote

04-14-2013, 09:50 AM	#128
ChrisK Major General 4449 Rep 7,594 Posts Drives: '19 M2C Join Date: Jun 2007 Location: Chicagoland iTrader: (7) Garage List 2019 BMW M2C [7.00] 2015 Porsche Macan S [0.00]	I just ordered a set in Gunmetal __________________ www.ReTuneTheDeTune.com 2019 M2 Competition (Sunset Orange)
	Appreciate 0 Quote

04-21-2013, 09:07 PM	#130
ChrisK Major General 4449 Rep 7,594 Posts Drives: '19 M2C Join Date: Jun 2007 Location: Chicagoland iTrader: (7) Garage List 2019 BMW M2C [7.00] 2015 Porsche Macan S [0.00]	I installed these, and all I can say is perfect! No need for version 2.0 of these extended paddles. The Gunmetal is perfect, the paddles don't stick out as do the oem silver. I was hesitant at first given the cutouts on the paddles, but they feel lighter and more easily engaged. I recommend these 100%!! Word of advice, don't forget to plug in the airbag cable before re-connecting your battery - now I need to have the airbag warning code cleared. My fault. __________________ www.ReTuneTheDeTune.com 2019 M2 Competition (Sunset Orange)
	Appreciate 0 Quote

05-28-2013, 02:35 AM	#131
norman@sonicms BimmerPost Supporting Vendor 0 Rep 34 Posts Drives: Rocketbunny FRS & Tesla ModelS Join Date: May 2013 Location: Milpitas, CA iTrader: (0)	Glad you like it ChrisK!
	Appreciate 0 Quote

06-30-2013, 06:44 PM	#132
TheEnrique Colonel 525 Rep 2,333 Posts Drives: F90 M5 Join Date: May 2006 Location: Bergen County, NJ iTrader: (37) Garage List 2020 M5 [0.00] 2012 M3 Coupe [0.00] 2017 M4 Convertible [0.00] 2013 X5M [0.00] 2015 F82 M4 [0.00]	pm please gunmetal to 07650
	Appreciate 0 Quote