Retrofit Coding question

[mmm_e90]

I am in the proccess of retrofitting a CIC system in my car and had some questions about coding.
I purchased the INPA K+CAN K+DCAN Car Diagnostic Tool Cable.
I currently am not getting any sound coming from the car. Chime, radio, etc.
The car is equipped with a logic 7 amp.
As far as coding goes when i delete #0607 to add #0911 and $6VA do I need to do this on all CAS, FRM and NFRM? or is it just CAS?
Also to update the logic 7 amp using Winkfp do I just download the latest SP-Daten and upload it to Winkfpt then just click program ZUSB?

Any help would be appreciated
Thank you

[Scrippy]

Originally Posted by mmm_e90

I am in the proccess of retrofitting a CIC system in my car and had some questions about coding.
I purchased the INPA K+CAN K+DCAN Car Diagnostic Tool Cable.
I currently am not getting any sound coming from the car. Chime, radio, etc.
The car is equipped with a logic 7 amp.
As far as coding goes when i delete #0607 to add #0911 and $6VA do I need to do this on all CAS, FRM and NFRM? or is it just CAS?
Also to update the logic 7 amp using Winkfp do I just download the latest SP-Daten and upload it to Winkfpt then just click program ZUSB?

Any help would be appreciated
Thank you

Change VO in CAS & NFRM. As far as updating I would recommend getting into the software and familiarizing yourself with it before jumping to that. A bricked firmware update will be a pain in the ass. The amp update is probably non existent as no new features will be present or anything.