|
|
10-21-2020, 12:48 PM | #1 |
Private
9
Rep 62
Posts |
DINAN E90 Stage 2 Suspension System (non-EDC only)
Hi There! I have the option of acquiring this Stage 2 Kit for NON-EDC BMW E90 M3. Wondered if it might be of interest to anyone before it hits ole flea bay? It comes with the following: • Performance Spring Set • Matching Front Bump-Stops • Front Guide Supports • Rear Upper Shock Mount Kit (10mm) • Lightweight Tubular Adjustable Front Anti-Roll Bar • Urethane Bushings • Heavy Duty Brackets • Adjustable Length End Links From DINAN: Stage 1 Suspension System Dinan's Stage 1 Suspension System provides greater control over body roll by virtue of carefully calibrated spring rates designed to work in conjunction with the original-equipment standard or EDC shocks and struts. Dinan lowers the M3 by 1/2" front and rear for improved suspension geometry and an even more aggressive stance. Matching bump stops and replacement front guide supports are included that actually increase suspension travel by 10mm for improved handling capabilities along with surprisingly civilized ride quality. The higher spring rates, increased suspension travel and improved suspension geometry give the M3 even more grip for faster and more predictable cornering capabilities. All of the factory strut/shock system are maintained for cars equipped with this option. Benefits: + Reduce Body Roll + Retain Factory strut/shock functionality + Lower Ride Height by 1/2" in Front & Rear + Improved Suspension Geometry + Increase Suspension Travel By 10MM + Superb Ride Quality + Improved Mechanical Grip In All Conditions Stage 2 Suspension System is the addition of the Lightweight Tubular Adjustable Front Anti-Roll Bar to the Stage 1 Suspension System. SPECIAL NOTE: For vehicles not equipped with Electronic Damper Control only. System employs stock shocks and struts. |
10-21-2020, 04:33 PM | #3 |
Private
9
Rep 62
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|