|
|
08-19-2018, 01:43 PM | #1 |
Lieutenant
119
Rep 423
Posts |
Installed the rogue engineering delrin clutch pedal bushings today. I am pleased with the effect, but the fitment wasn't the best. I had to sand both bushings to be able to fit the lock clip on the pedal shaft. The original ones have a 15mm sleeve, the RE 24mm. Sanding down to 19mm made the installation possible.
The clutch feels more solid and precise. Zero lateral play even when pressed in. The lower picture shows comparison between stock and delrin, the upper from the left: original RE bushing, sanded one and stock so you can compare the sleeve thickness.
__________________
|
08-19-2018, 02:12 PM | #2 |
Colonel
3549
Rep 2,823
Posts |
These are a great upgrade. I did the AKG delrin pedal bushings (with the Mason pedal) on my 46 6MT and loved them (also perfect fit out of the box).
Last edited by wyatth; 08-20-2018 at 06:13 PM.. |
Appreciate
0
|
08-20-2018, 01:44 AM | #4 |
Lieutenant
119
Rep 423
Posts |
I bet, but also like 15x more expensive
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|