Sponsored by The Tire Rack

[Powashiftin]

Originally Posted by Ervin87

19x10ET20 Front
19x10ET2 Rear (18 MM Spacer)
275/30/19 Square

What color is this? Looks great.

[MW000]

Originally Posted by becausephilchow

Did you end up doing

19x10 +13 on 275/30/19 Michelin PSS for your fronts?

[PetrolFumes]

anyone running 265/30 front and 285/30 rear with pss or pirelli's on zcp wheels and want to share pics?

[DemolitionJim]

Hooray

[solle]

Im about to order new wheels and tyres for my e90 m3 sedan LCI and need some tips and directions

Right now im on the stock suspension (EDC, none zcp) and the plan is going either with eibach pro kit springs or a kw sleeveover kit.

Stock wheels are
F 18x8.5 et29 245 40 18
R 18x9.5 et23 265 40 18

I did some trial and error with the wheels I had and put the rears on the front and it was pretty flush (allmost poking the arch cause of the tyres). I did a test drive with the backs mounted in front an it was rubbing a bit while turning max at low speeds.

The wheels I am looking at are 19x9 et15 front, and 19x10 et25 in the rears. After reading through the entire thread it feels like 10 et25 could fit in the front? Should I go with the 9 and 10s or go 10s square? As this is my daily I dont want any issues with rubbing tho I want to put as big wheels and tyres as possible. I know I maybee should look for other wheels but im kinda stuck with this ones cause I like the look of them.

What tyre size is optimal? The dealer recommended going with 245 35 19 and 265 45 19 but I am pretty sure after reading through the posts that some ppl have rubbing issues with 245 35 on the front?

I dont want a meaty sidewall, neither do I want to put 225 tyres on a 10" wheel

[G80_GuyGuy]

Front:
20x9
et 10
245/30/30

Rear:
20x11
et30
295/25/20

[G80_GuyGuy]

[offaxis]

Specs:
19x10+15 245/30/19
19x12+25 285/30/19

[ScottyBeam]

Looking to buy the VMR V710's ASAP, but just had a few quick questions. Can I do a Front 19x9.5 ET22 and a Rear 19x11 ET25 on my car (2009 E93 M3) with out any rubbing or Fender work? If not what is the most Aggressive way to go while keeping the car at stock height with no rubbing and or tire stretching?

[Conzyo]

Originally Posted by ScottyBeam

Looking to buy the VMR V710's ASAP, but just had a few quick questions. Can I do a Front 19x9.5 ET22 and a Rear 19x11 ET25 on my car (2009 E93 M3) with out any rubbing or Fender work? If not what is the most Aggressive way to go while keeping the car at stock height with no rubbing and or tire stretching?

perfect setup for that size, I had that same specs for the VMRs last year. and no rubbing even when lowered.

[ScottyBeam]

Originally Posted by Conzyo

perfect setup for that size, I had that same specs for the VMRs last year. and no rubbing even when lowered.

Thanks! thats all I need to hear. Do you have any Pics?

[Conzyo]

Originally Posted by ScottyBeam

Thanks! thats all I need to hear. Do you have any Pics?

free gif upload

[ScottyBeam]

Sweeeet!!....Too bad they're out of stock on the rear wheels with no ETA on when they will restock SMH lol

[ScottyBeam]

Anybody running a 19x10.5(F) and 19x11(R) , if so what are your tire sizes and what is your offset? No rubbing hopefully.

[M3 Number 86]

Originally Posted by Qe92

I second this

i think we have a whole track section on here

[solle]

Originally Posted by ijnoj09

Most recent pics of my setup.

19x10 +15

19x11.5 +21 w/ 3mm spacer

35 or 30 profile?

[MrMikeHenry]

Just had these mounted today.

19x9.5 +12 255/35
19x11 +19 295/30

[RoyalFlushness]

DSC_8294 by Frankie, on Flickr

[T!m3]

Also, guys, I need an advise! My wheels are r20 with et20 offsets
and I have a little rub in the rear. Tyres i use for rear - mpss 295/30(10.5 inch rear rims ). Should i go 285/30?

[jamba]

Originally Posted by T!m@

Also, guys, I need an advise! My wheels are r20 with et20 offsets
and I have a little rub in the rear. Tyres i use for rear - mpss 295/30(10.5 inch rear rims ). Should i go 285/30?

I have the same problem but with 19x11 +21

I'm going to try to add some neg camber this week

[T!m3]

Originally Posted by Eugene-TAIWAN

Thanks

can you say anything about your alignment specs pls?

[cmyE93M3]

I bought a used set of HRE P40's which are standard spec:

19x9 et 28 | PSS 255/35/19
19x10.5 et 28 | PSS 295/30/19

I need some help on the spacer scenario as I don't want to rub, but I want to fill out the wheel well a little more. If the offset for the front utilizing a spacer was +12 and the rears +25 do you think it would clear and not rub? Anybody with P40's could recommend the best set up?

Thanks for the help in advance!