Alternative Way to Pressure Bleed

[eM3e]

Assembled this little rig since I already have a pressure source. Ran the system at 8 PSI. Worked really well. Quick disconnect to the brake fluid reservoir makes it easy to remove and add fluid as you go. Links below to everything used to assemble.











Wasn't able to get a 100% flush. My guess is this fluid has been in service way too long. Will probably take a few flushes.

• https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
• https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
• https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
  Could probably omit this valve and save $9
• https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
  These bottles made it very easy and mess free to fill the reservoir and collect old fluid
• Air fittings I had lying around as left overs from this kit https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
• Teflon tape