|
|
04-01-2013, 03:31 PM | #1 |
Captain
71
Rep 954
Posts |
DSC On or Off for HPDE?
I have my first HPDE coming up in a few weeks (3 days @ Summit Point) and was wondering if the instructors typically prefer you to go with DSC on or off?
I'd think off would be better so that I can learn to control slips/slides/etc rather than letting the DSC step in, especially learning this skill at lower speeds and early on. Of course, whatever the instructor wants is what I will do, but I was just curious how DSC is typically handled? If it makes a difference, this is in an E46. Thanks. |
04-01-2013, 03:34 PM | #2 |
Automobilist
397
Rep 2,632
Posts |
I would say it depends on the instructor. I have had instructors ask that I enable MDM for saftey and I have also had instructors ask me to turn off DSC altogether. Instructors that asked me to turn it off told me that I wouldn't learn anything with DSC on. You can certianly discuss it with your instructor and see what makes sense for the both of you.
|
Appreciate
0
|
04-01-2013, 05:38 PM | #3 |
Midlife Crises Racing Silent but Deadly Class
1827
Rep 5,337
Posts
Drives: 2006 MZ4C, 2021 Tesla Model 3
Join Date: Oct 2007
Location: Welcome to Jamaica have a nice day
|
Whatever you do, make sure you emphasize with your instructor that you'd like to turn off DSC to go "flat out." They'll really appreciate it.
__________________
Sitting on a beat-up office chair in front of a 5 year old computer in a basement floor, sipping on stale coffee watching a bunch of meaningless numbers scrolling aimlessly on a dimly lit 19” monitor.
|
Appreciate
0
|
04-01-2013, 05:43 PM | #4 |
Latvian Gangstah
84
Rep 570
Posts |
I think MDM/DSC have their place. When new to track, you'll gain much more from learning the line and feeling comfortable. Once you have several sessions under your belt and feel comfy, you can always turn it off and and pay attention to what changes.
I'd say do not turn it off unless you feel it fighting you/impeding your drive out of corners.
__________________
2009 E92 M3 Melbourne Red 6MT
[SOLD] 2015 YMB BMW M3 M-DCT [SOLD] 2010 Alpine White E90 M3 M-DCT [SOLD] 2002 TiAg E46 M3 manual Last edited by jbraslins; 04-01-2013 at 05:48 PM.. |
Appreciate
0
|
04-01-2013, 06:07 PM | #5 |
Apex Everything!
999
Rep 4,378
Posts
Drives: 2007 Honda S2000, 2017 GT350
Join Date: Sep 2008
Location: Cedar Park, TX
|
I'd keep MDM on at a minimum until you learn how to properly react and correct a potential spin. I had a friend who knew in theory how to correct a spin, and did a few track days with DSC off with no problems. Then one day it happened and he just wasn't fast enough and spun into a wall.
It's pretty much a fact that once you drive with DSC off and start pushing to go faster, the rear will come out more often and you need to be ready for that situation.
__________________
2011 E92 M3(Sold). 2007 Honda S2000 (Track Car). 2016 Cayman GT4 (Sold). 2017 Shelby GT350 (AKA Crowd Killer).
My pet project: https://stickershift.com |
Appreciate
0
|
04-01-2013, 06:25 PM | #6 |
Major
71
Rep 1,250
Posts |
I never advise students for or against DSC, but I prefer them to run DSC off on their own if they have any kind of decent car control. DSC full-on builds bad habits, habits that take a lot of time to fix later on as the driver progresses. MDM is a little better, but still allows drivers to progress too quickly without ever having to learn skills I consider essential, such as throttle modulation and countersteering. The E9X chassis is REALLY easy to drive fast, and one of the best cars in that performance bracket to learn to really drive (DSC off). YMMV.
To counter my own point, I will say that if you are a completely green student with zero experience, I'd probably suggest MDM on. First track day is overwhelming, and would be ruined if you had a crash. |
Appreciate
0
|
04-01-2013, 06:27 PM | #7 |
General
21145
Rep 20,745
Posts
Drives: 2021 911 turbo
Join Date: Jan 2012
Location: Montreal
|
I always leave it up to the student to choose the DSC mode they prefer.
My recommendation is that for the first time you go out on the track, keep MDM (or DSC if you don't have the MDM option) activated. Once you are comfortable with the track layout and the proper driving line and if you feel up to it, turn the nannies off. The sooner you drive without the aids, the better habits and reflexes you will develop. I've had to work very hard with some students that had become decently quick with driving aids, but had developed terribly bad habits that the electronics were hiding. The worst habit is pinching the steering wheel while applying throttle coming out of a turn. With DSC, you wouldn't feel anything. But with DSC off, this could lead to a big moment on corner exit. Have fun and report back |
Appreciate
0
|
04-01-2013, 06:28 PM | #8 |
General
21145
Rep 20,745
Posts
Drives: 2021 911 turbo
Join Date: Jan 2012
Location: Montreal
|
|
Appreciate
0
|
04-01-2013, 06:32 PM | #10 |
Lieutenant Colonel
746
Rep 1,848
Posts |
I think the primary objective in any DE (or probably any track event) is to bring the car back in the same shape that it arrived in.
Second is to learn the line and to be smooth. Third is to learn to drive (and brake) comfortably at high speed. Eventually, you want to combine all of this stuff to drive quicker and quicker lap times. I think DSC is appropriate all the way through the first 3 objectives, but you need to be aware of what DSC is doing for you and when it is doing it. I started with DSC on and drove 4-5 HPDE's before I decided to turn it off. I spun twice on the first session with it turned off. I am lucky I wasn't sent home. My mistake was that I didn't pay enough attention to when DSC was intervening. I developed some bad habits obviously. I braked when I wanted even if it was in the middle of the turn. I was also on the gas much too aggressively out of turns. DSC was doing a lot of intervention, but I wasn't connecting my driving with the feedback it was trying to give me. Long story short, leave it on, but pay close attention to when it intervenes and why. For the most part, you should be able to get around the track pretty quick without it intervening at all. When you do that, chances are you're smooth enough to drive without it. If you have MDM, that's probably the best way to go as it intervenes a lot less and you'll learn the limits much quicker (in relative safety). At some point, you'll not like the intervention and will want to take it off. Unfortunately, there is no real good way except for seat time and perhaps drifting practice to learn how to recover quickly enough from a significant oversteer event - you'll want to make sure you're anticipating where it can occur and be ready rather than trying to randomly react. I am not thinking that sliding is faster anyway, but as you get faster you will occasionally cross the line and you need to have the reflexes and skill to react. |
Appreciate
0
|
04-01-2013, 06:32 PM | #11 | |
General
21145
Rep 20,745
Posts
Drives: 2021 911 turbo
Join Date: Jan 2012
Location: Montreal
|
Quote:
However, IMO, in terms of masking bad habits, full DSC, MDM or Track Mode are all as bad. |
|
Appreciate
0
|
04-01-2013, 06:36 PM | #12 |
Captain
68
Rep 869
Posts |
The above advice is good. A lot of people will rail against DSC and tell you to just turn it off. Yes, you ultimately will turn it off, and yes will be quicker around the track. But, I think that the first few track days should be with MDM on (never full DSC) while you learn the line and get comfortably smooth at speed while in Novice group. When you step up to intermediate consider turning it off for good.
|
Appreciate
0
|
04-01-2013, 06:37 PM | #13 | |
First Lieutenant
29
Rep 300
Posts |
Quote:
I have so far been on track with MDM or Euro MDM on at all times......I suspect that the computer nanny has probably saved me once or twice......but I feel that I've learned enough fundamentals that I'm planning on going with DSC off at my next outing. For reference....a total of 5 de days at the same track. |
|
Appreciate
0
|
04-01-2013, 06:46 PM | #14 | |
Havin' a blast!
125
Rep 4,847
Posts |
Quote:
__________________
BRP 1:56 | CVR 2:01 | ACS 1:53 | WSIR 1:34
|
|
Appreciate
0
|
04-01-2013, 07:21 PM | #15 |
Captain
70
Rep 653
Posts |
DSC Off especially if you are just starting out. Otherwise bad habits will be formed. Plus when you are just starting out you are going to be 'slow' in comparison with your speed say 10 events in.
|
Appreciate
0
|
04-01-2013, 08:03 PM | #16 | |
Major
74
Rep 1,339
Posts |
Quote:
__________________
|
|
Appreciate
0
|
04-01-2013, 08:11 PM | #17 |
Lieutenant Colonel
746
Rep 1,848
Posts |
|
Appreciate
0
|
04-01-2013, 09:33 PM | #18 |
First Lieutenant
75
Rep 389
Posts |
Good posts above - and I agree with ThunderMoose.
Specific to this particular event - I am assuming that you are going out with DelVal? I so - keep in mind that on Day 1 you are running Jefferson. A good first-time on track learning track. Talk to your instructor. Some organizations have policies about whether your instructor can suggest DSC/MDM state. Day 2 you are on the same track - in the opposite direction. The track will look different - so I recommend that you initially enable DSC *if* you turned it off late in the previous day - because the track and turns will look completely different. Day 3 you are on Summit Main. A totally different track in almost every way. Plenty of elevation changes, on and off-camber, more speed and other driver challenges. Think of Main circuit as a new learning experience from the previous two days. Treat Turn 9 with respect and do not turn into it early. I'll see you there. Stop by and say hello. |
Appreciate
0
|
04-02-2013, 06:44 AM | #19 | |
Captain
71
Rep 954
Posts |
Quote:
Great info all around, thanks all. Sounds like the take-aways are:
I guess mostly those last two |
|
Appreciate
0
|
04-02-2013, 07:20 AM | #20 | |
Major General
834
Rep 7,887
Posts |
Quote:
|
|
Appreciate
0
|
04-02-2013, 08:35 AM | #21 | |
Major
71
Rep 1,250
Posts |
Quote:
I guess my earlier post also overlooked the fact that many students have goals other than becoming a racer. I have had students tell me that they just want to run 8/10 forever and have a good time, without ever worrying about lap times at all. In that case MDM/DSC can be a nice protection, since the driver won't ever need the skills he/she is failing to develop due to the driver aids. I'm not immune to driver aid disadvantages either! I have driven lots of fast cars on tracks for years, but every one had ABS. Now that I have a car with no aids, I'm having to learn braking all over again. Many modern cars have such effective ABS systems that they can interfere (slightly) fairly frequently. |
|
Appreciate
0
|
04-02-2013, 09:08 AM | #22 |
Captain
37
Rep 927
Posts |
BMW CCA teaches instructors to be indifferent regards to DSC. I agree with the above approaches but I really don't feel comfortable recommending.
If I sense the nannies are getting in the way or creating dangerous habits I usually demand we go for a ride in my car and I demo the three settings for them and tell them what I'm doing with the pedals and ask them to feel for it. It's usually pretty eye opening to have the car work to keep me on the track and in check. It's hard to teach a new student these dynamics because they are rarely flirting with the limits...they either are always way under or once in a while go way over. When they go way over their focus shifts to "fight or flight" and they can't feel what the car is doing for them (other than relief it's over ). I did that event back in 2008 and really learned a ton of car control both on Jefferson and the skidpad at Jefferson. This made the Monday on Summit Main so much fun. I only had about 8-9 days under my belt at this point. I look back on this three day event as one of the best in memory. If you can request an instructor...ask the registrar ahead of time if David Ortiz is instructing and request him.
__________________
Craig Brickner
Click to Join: BMWCCA # 366493 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|