Sponsored by The Tire Rack

[Chromey]

Hi guys I found used work vs-xx rims that fit a e46 m3 very aggressively and im wondering if they fit a e93 m3.. the rears stock are 4mm different the fronts are way off but I can use spacers. The listing states specs are as follows

Fronts 20x9.5 +52 offset and rears 20x11 +19

He has a picture with the wheels on and the rims sit aggressive but flush on a e46 m3

I know the hub size is bigger but I can get hubcentric rings

Any offset pros and fitment pros , your info is appreciated

[Chromey]

Sorry he uses 10mm spacers on the front

[Chromey]

Sorry the rims are not in my City or I test fit.. incase your wondering

[6ixSpd]

The front is +52? You would need at least a 20mm spacer for good fitment on the E92, wrapped in a 245/35/19 or 265/30/19 or 275/30/19 tires.

The rear is aggressive but doable. A 285/30/19 tires should suffice.

[BayE30]

not really ideal. to get nice fitment with 9.5 on the front i have run et15. et20 would still be good, but at et52 the front is going to be goofy. the rear is also pretty damn aggressive, probably will end up with a 275 stretched on the rear.

[s14_kev]

I would pass on those and find a set that fits the car better. Even with spacers, it won't be ideal as others have stated above. IMO 20s are too large for the E9x M3 anyways, so I would go with 19s max, personally.

[slicer]

Are you sure that the wheel isn't et25? et52 would likely rest on the strut even with a 10mm spacer.

Not sure what you mean about the hub size. E46 and e92 have same hub diameter. Only the e39 is unique.