BBK - Wheel Fitment Compatibility Database

ats*ben · 03-30-2020, 08:53 PM

AP Racing Radical CP9660
Volk ZE40 18x9.5 +20

daijc · 04-24-2020, 06:47 PM

Hey guys, I have a set of AP CP8520 w/ 380mm rotors, and my wheels are 18x10+25 Enkei NT03. I'm pretty sure the 380mm doesn't fit so does anyone know if 372mm rotors will fit? Thanks.

NebraskaM3 · 04-25-2020, 09:04 AM

Does anyone know if Harrop bbk will clear the 18/9.5 Apex arc-8?

crowtrobot · 04-14-2021, 02:10 PM

Necrothreading a little here, dunno if OP is still updating the first post. I found this while researching my BBK recently and thought it might help!

I have a square set of Bimmerworld TA16's in 18x10ET25. It will clear the Stoptech ST60 street kit (380mm).

zamboni · 05-15-2021, 07:40 PM

Quote:

Originally Posted by slicer

No. Brembo 380 is far harder to clear than Stoptech 380. There are only a couple 18" wheels that clear that kit. Biggest PIA for clearance

Slicer,

Had the 220M wheels
F 19X8.5 ET 29
R 19X9.5 ET 23
Will the Brembo 365mm and 345mm kit clear the wheels.Thanks

slicer · 05-15-2021, 10:22 PM

Quote:

Originally Posted by zamboni

Quote:

Originally Posted by slicer

No. Brembo 380 is far harder to clear than Stoptech 380. There are only a couple 18" wheels that clear that kit. Biggest PIA for clearance

Slicer,

Had the 220M wheels
F 19X8.5 ET 29
R 19X9.5 ET 23
Will the Brembo 365mm and 345mm kit clear the wheels.Thanks

I don't know for certain but I would say worst case you would need a spacer.

zamboni · 05-16-2021, 01:31 AM

Quote:

Originally Posted by slicer

I don't know for certain but I would say worst case you would need a spacer.

Thank you so much

StorMtroop3r · 06-23-2021, 12:51 PM

Would like to chime in for some answers. I'm going to pull the trigger on 3 piece BBS sport classics (step lip) or 3 piece BBS RS2's Concaved (step lip) and wondering if they would fit brembo gt 6 pot 380mm with or without spacer.

Specs are 19x10.5 and 19x11.5 not sure on ET

Thanks for any info that can be provided

ghalacli · 10-31-2023, 05:18 AM

I have Volk Racing TE37 SLs in 18x9.5" ET22 and Brembo 380mm calipers. It is very thight clearence.
Caliper even touches sometimes when the wheel flexes.( hard compression situations). I dremeled the caliper where it rubbed before about 1 mm. It seems to not touch anymore.

FYI slicer

See the scrathes on the wheel.

langsbr · 04-02-2024, 03:41 PM

Has anyone run the new Brembo B-M6 calipers on a BBK? I was hoping to get those with a 355mm rotor but can't find any fitment info or even a pdf cutaway to check clearance on my wheel.

I have 18x9 +30 Apex Arc 8 in the front.

03-30-2020, 08:53 PM	#89
ats*ben Private 8 Rep 62 Posts Drives: E90 M3 Join Date: Feb 2016 Location: SFO iTrader: (1)	AP Racing Radical CP9660 Volk ZE40 18x9.5 +20
	Appreciate 1 jritt@essex1026.00 Quote

04-24-2020, 06:47 PM	#90
daijc Private 33 Rep 89 Posts Drives: 2011 E92 M3 Join Date: Nov 2016 Location: Vancouver, BC iTrader: (0)	Hey guys, I have a set of AP CP8520 w/ 380mm rotors, and my wheels are 18x10+25 Enkei NT03. I'm pretty sure the 380mm doesn't fit so does anyone know if 372mm rotors will fit? Thanks.
	Appreciate 0 Quote

04-25-2020, 09:04 AM	#91
NebraskaM3 New Member 3 Rep 19 Posts Drives: 2012 BMW M3 e93 Join Date: May 2019 Location: NE iTrader: (0)	Does anyone know if Harrop bbk will clear the 18/9.5 Apex arc-8?
	Appreciate 0 Quote

04-14-2021, 02:10 PM	#92
crowtrobot First Lieutenant 366 Rep 317 Posts Drives: 2008 M3 Join Date: Sep 2015 Location: Philly iTrader: (1)	Necrothreading a little here, dunno if OP is still updating the first post. I found this while researching my BBK recently and thought it might help! I have a square set of Bimmerworld TA16's in 18x10ET25. It will clear the Stoptech ST60 street kit (380mm).
	Appreciate 0 Quote

06-23-2021, 12:51 PM	#96
StorMtroop3r New Member 0 Rep 11 Posts Drives: 09 E92 M3,88 E30 325i Vert Join Date: Mar 2016 Location: Virginia Beach iTrader: (1)	Would like to chime in for some answers. I'm going to pull the trigger on 3 piece BBS sport classics (step lip) or 3 piece BBS RS2's Concaved (step lip) and wondering if they would fit brembo gt 6 pot 380mm with or without spacer. Specs are 19x10.5 and 19x11.5 not sure on ET Thanks for any info that can be provided
	Appreciate 0 Quote

10-31-2023, 05:18 AM	#97
ghalacli New Member 2 Rep 19 Posts Drives: E92 M3 & E39 M5 Join Date: Jan 2016 Location: TURKIYE iTrader: (0)	I have Volk Racing TE37 SLs in 18x9.5" ET22 and Brembo 380mm calipers. It is very thight clearence. Caliper even touches sometimes when the wheel flexes.( hard compression situations). I dremeled the caliper where it rubbed before about 1 mm. It seems to not touch anymore. FYI slicer See the scrathes on the wheel. Last edited by ghalacli; 10-31-2023 at 05:25 AM..
	Appreciate 0 Quote

04-02-2024, 03:41 PM	#98
langsbr First Lieutenant 234 Rep 317 Posts Drives: 335i Join Date: Aug 2013 Location: SC iTrader: (0)	Has anyone run the new Brembo B-M6 calipers on a BBK? I was hoping to get those with a 355mm rotor but can't find any fitment info or even a pdf cutaway to check clearance on my wheel. I have 18x9 +30 Apex Arc 8 in the front.
	Appreciate 0 Quote