Rub / No Rub Index

Tosirius · 06-15-2020, 04:17 PM

Will I rub on 2011 stock Zcp wheels and stock competition ride height.
Spacers : 10mm front and rear
Tires 265/35/19 F
285/30/19 R
Michelin ps4s

AWe93 · 06-20-2020, 12:34 AM

E93 (non-edc) stock

Will this rub or will I have issue with the fenders?

Front: 19x9 ET20 running 255/35 PSS
Rear: 19x10.5 ET25 running 275/35 PSS

pewpster · 07-09-2020, 04:59 PM

Quote:

Originally Posted by pewpster

I'm wondering if i'm going to run into any problems with rubbing with this setup. Should I go to 30 on the height?

Car: 08 E92 M3

Wheels w/ Offsets: Apex PS-7 - (F) 19x9.5 +22, (R) 19x10.5 +22

Spacers: (F)15 mm (R)12.5 mm
Tires / Miles: Bridgestone Pole Position S04 - (F) 265/35/19, (R) 285/35/19;

Suspension: Swift Spec-R Springs

Fender Modifications: (F) None (R) None

I've already ordered the wheels. Waiting on picking tires.

Just an update for anyone with a similar setup. Recently put on some Toyo R888R's. 265/30/19 front and 295/30/19 rears on Swift Spec-R springs. Perfect fit. No rubbing what so ever.

MP0W3RD · 07-12-2020, 07:33 AM

I did my first track day on a set of Forgeline GTD-1s, 18x10 +27mm square set with 12mm spacers in the rear. 285/35/18 Hankook RS4s all the way around.

It rubbed slightly in the front but nothing too crazy. Running stock suspension and brakes (DS2500 pads, great hybrid pad, wears very quickly on track though).

Crazy8.M3 · 07-22-2020, 10:51 AM

Quote:

Originally Posted by NorCal24

Just got them mounted yesterday. Kept the spacers on (15f/12r) and it's looks good.

Bilstein B16 Damptronic Coil Over Suspension
Tires: Pilot Sport 4S
F - 255/35 19 with 15 mm MS spacer
R - 275/35 19 no spacer (removed 12mm MS spacer)

Will try 10mm spacer in the rear and move 12mm spacer to the front. No rubbing yet in the front with 15mm spacer but will see after it settles.

RealtorReece · 08-07-2020, 01:21 PM

Hi everyone.

I have been searching quite a bit.

I own a e92 m3 with stock suspension ( non edc ).

I just ordered 18 inch apex arc 8‘s. 9.5 et22 F and 10.5 et 27.

I would love to fit 275/35/18F and 295/35/18R. Will this be plug and play or will it rub? The tires I am planning on running are continental extreme contract sports. I get a huge discount through a friend on the tire. Any advice I would greatly appreciate.

mikejnc · 08-13-2020, 01:04 PM

Quote:

Originally Posted by RealtorReece

Hi everyone.

I have been searching quite a bit.

I own a e92 m3 with stock suspension ( non edc ).

I just ordered 18 inch apex arc 8‘s. 9.5 et22 F and 10.5 et 27.

I would love to fit 275/35/18F and 295/35/18R. Will this be plug and play or will it rub? The tires I am planning on running are continental extreme contract sports. I get a huge discount through a friend on the tire. Any advice I would greatly appreciate.

those specs are pretty plug and play, especially on stock suspension.

M3atman · 08-29-2020, 09:57 PM

I'm running Ohlins coilovers and thinking about a square set of 19in BBS LM-Rs

19x9.5 ET 25

What would be a good tire size? 275/30 all around? Would I need spacers up front?

TIA

rhyary · 08-30-2020, 02:41 AM

Quote:

Originally Posted by M3atman

I'm running Ohlins coilovers and thinking about a square set of 19in BBS LM-Rs

19x9.5 ET 25

What would be a good tire size? 275/30 all around? Would I need spacers up front?

TIA

275/30/19 front and 275/35/19 works well

275/30/19 rear would be too short

M3atman · 08-30-2020, 10:27 AM

Square set of GTS wheels 18x11 ET 30 Will these fit w/o fender rolling? What tire size?

I'm on OHLINS coilovers

spliffin · 09-04-2020, 12:02 AM

Hey I'd appreciate some input.

E90 M3
OEM Style 220m F 19x8.5
OEM Style 220m R 19x9

KW V3 Coilovers (lowest recommended kw setting)

12-12.5mm Rear and 10mm Front?
Thanks in advance.

LeveragedTiger · 09-04-2020, 12:18 PM

Quote:

Originally Posted by spliffin

Hey I'd appreciate some input.

E90 M3
OEM Style 220m F 19x8.5
OEM Style 220m R 19x9

KW V3 Coilovers (lowest recommended kw setting)

12-12.5mm Rear and 10mm Front?
Thanks in advance.

That'll fit easily.

Rears are 9.5, however. Front has a lot more space than the rear.

spliffin · 09-04-2020, 12:49 PM

Quote:

Originally Posted by LeveragedTiger

Quote:

Originally Posted by spliffin

Hey I'd appreciate some input.

E90 M3
OEM Style 220m F 19x8.5
OEM Style 220m R 19x9

KW V3 Coilovers (lowest recommended kw setting)

12-12.5mm Rear and 10mm Front?
Thanks in advance.

That'll fit easily.

Rears are 9.5, however. Front has a lot more space than the rear.

Thanks for reply!
Think I could go 15mm rear and 12.5mm front?

Thanks again,
Spliffin

DL335D · 09-04-2020, 01:27 PM

Quote:

Originally Posted by spliffin

Quote:

Originally Posted by LeveragedTiger

Quote:

Originally Posted by spliffin

Hey I'd appreciate some input.

E90 M3
OEM Style 220m F 19x8.5
OEM Style 220m R 19x9

KW V3 Coilovers (lowest recommended kw setting)

12-12.5mm Rear and 10mm Front?
Thanks in advance.

That'll fit easily.

Rears are 9.5, however. Front has a lot more space than the rear.

Thanks for reply!
Think I could go 15mm rear and 12.5mm front?

Thanks again,
Spliffin

15 front 12 rear will look better. Tons of guys running that exact setup.

spliffin · 09-04-2020, 01:27 PM

Quote:

Originally Posted by DL335D

Quote:

Originally Posted by spliffin

Quote:

Originally Posted by LeveragedTiger

Quote:

Originally Posted by spliffin

Hey I'd appreciate some input.

E90 M3
OEM Style 220m F 19x8.5
OEM Style 220m R 19x9

KW V3 Coilovers (lowest recommended kw setting)

12-12.5mm Rear and 10mm Front?
Thanks in advance.

That'll fit easily.

Rears are 9.5, however. Front has a lot more space than the rear.

Thanks for reply!
Think I could go 15mm rear and 12.5mm front?

Thanks again,
Spliffin

15 front 12 rear will look better. Tons of guys running that exact setup.

Awesome thanks, I'll buy today and update after install.

LeveragedTiger · 09-05-2020, 06:36 PM

Quote:

Originally Posted by spliffin

Thanks for reply!
Think I could go 15mm rear and 12.5mm front?

Thanks again,
Spliffin

Depends on tire and camber.

I had 265/35 AD08R and rubbed like crazy with a 15mm spacer in the rear, it got better with 12mm.

I now have the 265/30 AD08R on -2.2 of camber and have 0 issues.

801SLCE92 · 11-25-2020, 09:27 PM

E92 M3 '10

currently have major rubbing on front tires against the back wheel liner. I have a set of BBS CI-R wheels (after checking BBS spec sheet of actual wheel type, it is listed for F8X...) but: would it be 'fixable' so I minimize rubbing with correct alignment and spacers is my question?

running KW HAS at very close to ZCP ride height.

F: 19x9.5 ET40 running 265/35 and 18mm spacer
R: 19x10.5 ET35 w/ 285/35 and 15 mm spacer (seems fine, it's tight but don't expect much rubbing.

Could really use any help/ advice! My initial next step would be to get smaller tires (245 seems small-ish for the wheel though). TIA!

Freiheit · 12-08-2020, 07:22 PM

2011 ZCP coupe
Dinan Stage 2 suspension
ZCP wheels with stock Contis

considering PS4S 255/35 + 275/35 (unless someone says "NO! You want this!" and posts up a good reason for "this")

spacers: Should I?

Opinions welcomed on the tires and spacers

Mimmer · 12-08-2020, 10:50 PM

Quote:

Originally Posted by Freiheit

2011 ZCP coupe
Dinan Stage 2 suspension
ZCP wheels with stock Contis

considering PS4S 255/35 + 275/35 (unless someone says "NO! You want this!" and posts up a good reason for "this")

spacers: Should I?

Opinions welcomed on the tires and spacers

I run these specs with 4s without the stage 2 suspension. But I don't see why be issue so much room. Unless u dropped it more than inch up front and like than .5 rears...

Freiheit · 12-09-2020, 09:22 AM

The Dinan drop is half an inch over the base M3. Since the ZCP is already 10mm lower, the Dinan coils only drop it another 2.7mm past ZCP static height.

Mimmer · 12-09-2020, 01:40 PM

Quote:

Originally Posted by Freiheit

The Dinan drop is half an inch over the base M3. Since the ZCP is already 10mm lower, the Dinan coils only drop it another 2.7mm past ZCP static height.

Yeah my stock zcp on 4s I got like 1. inch room gap front
Rears like .7 roughly gap. I can measure exactly later but the wheel itself should be fine in those specs on a very slight drop. Michelin are more rounded. If you went any wider on fronts or rears that different story.

But again just my 2 cents compared what I have. So I cannot guarantee. Just trying be helpful with 4s on zcp

I think if you go back in thread some still do spacers I cannot recall ... on these specs

Miso soup · 01-25-2021, 08:05 PM

the previous owner of the car was running 255/35r20 on the front and it rubs horribly on both sides at a 1/4 turn of the wheel.

06-15-2020, 04:17 PM	#683
Tosirius Private 12 Rep 88 Posts Drives: 2011.5 E92 M3 Join Date: Jul 2013 Location: Queens, NY iTrader: (1)	Will I rub on 2011 stock Zcp wheels and stock competition ride height. Spacers : 10mm front and rear Tires 265/35/19 F 285/30/19 R Michelin ps4s Last edited by Tosirius; 06-16-2020 at 12:19 AM..
	Appreciate 0 Quote

06-20-2020, 12:34 AM	#684
AWe93 Enlisted Member 1 Rep 30 Posts Drives: 2011 E93 M3 Join Date: Apr 2016 Location: New York, NY / NoVA iTrader: (0)	E93 (non-edc) stock Will this rub or will I have issue with the fenders? Front: 19x9 ET20 running 255/35 PSS Rear: 19x10.5 ET25 running 275/35 PSS
	Appreciate 0 Quote

07-12-2020, 07:33 AM	#686
MP0W3RD BMWCCA Member 125 Rep 98 Posts Drives: 1997 M3 Sedan Join Date: Oct 2019 Location: Michigan iTrader: (0) Garage List 1997 BMW M3 Sedan [0.00] 2011 BMW M3 [0.00]	I did my first track day on a set of Forgeline GTD-1s, 18x10 +27mm square set with 12mm spacers in the rear. 285/35/18 Hankook RS4s all the way around. It rubbed slightly in the front but nothing too crazy. Running stock suspension and brakes (DS2500 pads, great hybrid pad, wears very quickly on track though). __________________ [E36]1997 BMW M3 Sedan, 5 Speed [E92]2011 BMW M3 Coupe, DCT
	Appreciate 0 Quote

08-07-2020, 01:21 PM	#688
RealtorReece Registered 0 Rep 4 Posts Drives: WTB 335i Join Date: Apr 2015 Location: Vancouver, BC iTrader: (0)	Hi everyone. I have been searching quite a bit. I own a e92 m3 with stock suspension ( non edc ). I just ordered 18 inch apex arc 8‘s. 9.5 et22 F and 10.5 et 27. I would love to fit 275/35/18F and 295/35/18R. Will this be plug and play or will it rub? The tires I am planning on running are continental extreme contract sports. I get a huge discount through a friend on the tire. Any advice I would greatly appreciate.
	Appreciate 0 Quote

08-29-2020, 09:57 PM	#690
M3atman Lieutenant 69 Rep 562 Posts Drives: 2009 E92 M3 Join Date: Jul 2014 Location: UnFairfax,VA iTrader: (2)	I'm running Ohlins coilovers and thinking about a square set of 19in BBS LM-Rs 19x9.5 ET 25 What would be a good tire size? 275/30 all around? Would I need spacers up front? TIA __________________ TTFS Tune \| DINAN Exhaust \| Bimmerworld Xpipe \| OHLINS Coilovers \| Challenge Carbon Trunk \| Eventuri Intake \| APEX Wheels \| AP Racing BBK \| Turner Monoball
	Appreciate 0 Quote

08-30-2020, 10:27 AM	#692
M3atman Lieutenant 69 Rep 562 Posts Drives: 2009 E92 M3 Join Date: Jul 2014 Location: UnFairfax,VA iTrader: (2)	Square set of GTS wheels 18x11 ET 30 Will these fit w/o fender rolling? What tire size? I'm on OHLINS coilovers __________________ TTFS Tune \| DINAN Exhaust \| Bimmerworld Xpipe \| OHLINS Coilovers \| Challenge Carbon Trunk \| Eventuri Intake \| APEX Wheels \| AP Racing BBK \| Turner Monoball
	Appreciate 0 Quote

09-04-2020, 12:02 AM	#693
spliffin Private 7 Rep 53 Posts Drives: 2011 E90 M3 Join Date: Jan 2020 Location: Los Angeles iTrader: (0)	Hey I'd appreciate some input. E90 M3 OEM Style 220m F 19x8.5 OEM Style 220m R 19x9 KW V3 Coilovers (lowest recommended kw setting) 12-12.5mm Rear and 10mm Front? Thanks in advance.
	Appreciate 0 Quote

11-25-2020, 09:27 PM	#699
801SLCE92 Enlisted Member 1 Rep 47 Posts Drives: '10 BMW E92 M3 Alpinweiss III Join Date: Mar 2020 Location: UT iTrader: (0)	E92 M3 '10 currently have major rubbing on front tires against the back wheel liner. I have a set of BBS CI-R wheels (after checking BBS spec sheet of actual wheel type, it is listed for F8X...) but: would it be 'fixable' so I minimize rubbing with correct alignment and spacers is my question? running KW HAS at very close to ZCP ride height. F: 19x9.5 ET40 running 265/35 and 18mm spacer R: 19x10.5 ET35 w/ 285/35 and 15 mm spacer (seems fine, it's tight but don't expect much rubbing. Could really use any help/ advice! My initial next step would be to get smaller tires (245 seems small-ish for the wheel though). TIA!
	Appreciate 0 Quote

12-08-2020, 07:22 PM	#700
Freiheit Captain 492 Rep 675 Posts Drives: 2011 Competition Coupe Join Date: Jul 2017 Location: Southeast iTrader: (0)	2011 ZCP coupe Dinan Stage 2 suspension ZCP wheels with stock Contis considering PS4S 255/35 + 275/35 (unless someone says "NO! You want this!" and posts up a good reason for "this") spacers: Should I? Opinions welcomed on the tires and spacers __________________ Dinan Stg II Suspension • Remus Race • Gintani CF lip / CF quarter fins • Vorsteiner Type II CF Diffuser • BMW Performance CF Spoiler / black fender gills / black kidney grilles / CF mirror cover • Speed Element GTS CF side skirts • M3 GTS door sills • Lux Angel Eyes • body color reflectors • Alex@Alpine Stg I tune • AA filter
	Appreciate 0 Quote

12-09-2020, 09:22 AM	#702
Freiheit Captain 492 Rep 675 Posts Drives: 2011 Competition Coupe Join Date: Jul 2017 Location: Southeast iTrader: (0)	The Dinan drop is half an inch over the base M3. Since the ZCP is already 10mm lower, the Dinan coils only drop it another 2.7mm past ZCP static height. __________________ Dinan Stg II Suspension • Remus Race • Gintani CF lip / CF quarter fins • Vorsteiner Type II CF Diffuser • BMW Performance CF Spoiler / black fender gills / black kidney grilles / CF mirror cover • Speed Element GTS CF side skirts • M3 GTS door sills • Lux Angel Eyes • body color reflectors • Alex@Alpine Stg I tune • AA filter
	Appreciate 0 Quote

01-25-2021, 08:05 PM	#704
Miso soup New Member 0 Rep 6 Posts Drives: e90 m3 Join Date: Jan 2021 Location: CA iTrader: (0)	the previous owner of the car was running 255/35r20 on the front and it rubs horribly on both sides at a 1/4 turn of the wheel.
	Appreciate 0 Quote