WTB clock spring M3 e92

[blackburn-hero]

Hi,

My flashers won’t work anymore. I need to find a used or new clock spring.
It for a M3 e92 2010 manual.

I’m from Canada.

Thanks you!

[blackburn-hero]

Damn, I created this in the wrong section! A Mod can move this thread in the right section please?

[calicoupe]

FYI, this happened to me and I found a DIY on cleaning the steering angle sensor and disk which solved for me. It was not much more effort than replacing, so might be worth looking up and trying before replacing

[blackburn-hero]

Originally Posted by calicoupe

FYI, this happened to me and I found a DIY on cleaning the steering angle sensor and disk which solved for me. It was not much more effort than replacing, so might be worth looking up and trying before replacing

Your problem was flashers only without steering angle sensor error?

Will try for sure, thanks for the info

[calicoupe]

Sorry, i misunderstood your original problem. But I did not have a SAS error (or any error for that matter), but my my first symptom was turn signals not turning off after completing the turn (there were other odd symptoms as well but all related to inaccurate measurement of steering wheel position - it's been a while so don't remember all of them). Simply cleaning the disc and sensor solved for me and going on a few years running now.

[blackburn-hero]

Originally Posted by calicoupe

Sorry, i misunderstood your original problem. But I did not have a SAS error (or any error for that matter), but my my first symptom was turn signals not turning off after completing the turn (there were other odd symptoms as well but all related to inaccurate measurement of steering wheel position - it's been a while so don't remember all of them). Simply cleaning the disc and sensor solved for me and going on a few years running now.

I did not have a SAS error as well. I just the turn signal problem. It work if I keed my hand on the stick. I will try to clean the disc and sensor.

Thanks you for the explanation.

[blackburn-hero]

Thanks you calicoupe, I cleaned my SAS today and this solved my problem.

I’m happy to save money lol