|
|
11-13-2022, 10:42 AM | #1 |
Second Lieutenant
116
Rep 228
Posts
Drives: E90 M3
Join Date: May 2021
Location: California
|
Fuel Injector Replacement Questions
One fuel injector is leaky—misfires in one cylinder on cold start, pulled plug smells like ethanol (E85), and swap coils misfire did not follow.
Gonna get all new injectors cause why not, takes out guess work. I saw I will need to code the new ones. Couple questions just to mentally prepare. (1) The values of the injectors are on the injectors. Correct? (2) It looks coding can be done with Protools. Correct? Thank you
__________________
yt:itoto
insta:@m3.toto |
11-15-2022, 01:52 AM | #2 |
First Lieutenant
274
Rep 302
Posts |
These are just regular common rail fuel injectors, not Piezos. So, there is no need for entering values or coding at all. Just simply take them out and replace them...make sure to properly lube both O-Rings (#5 and #6) on each side and replace the retaining clips (#7) as well.
Link to the FCP kit...probably the best deal with the lifetime warranty: https://www.fcpeuro.com/products/bmw...h-0280158164kt |
Appreciate
1
itoto115.50 |
11-15-2022, 06:43 AM | #3 | |
Second Lieutenant
116
Rep 228
Posts
Drives: E90 M3
Join Date: May 2021
Location: California
|
Quote:
__________________
yt:itoto
insta:@m3.toto |
|
Appreciate
0
|
11-15-2022, 07:17 AM | #4 | |
Banned
44
Rep 54
Posts |
Quote:
|
|
Appreciate
1
itoto115.50 |
Post Reply |
Bookmarks |
|
|